Buy home-made TVs for fishing. Screen for catching fish with your own hands. Homemade fishing screen - easy and simple

A good angler has in his arsenal many varieties of tackle, lures and other accessories for any fishing season. In addition, any professional angler needs to have such a fishing device as a fishing screen in their fishing gear. Many fishermen have known him since early childhood. It is easy to make and does not require a large investment to make it. Since not all fishermen have enough money to buy it in a fishing store, let's see how you can make a homemade fishing screen or, as it is called in another way, fishing tv, right at home and save your hard-earned money.

In fact, using a fishing screen big catch you should not wait, but this device is very fond of both adult fishermen and children. With it, you can catch enough fish in your ear or just fry, but the most main feature of the fishing screen is that it does not pollute the habitat of the fish, that is, the reservoir, and does not harm the fish. You can catch about the same amount of fish with this device as with a spinning rod or a fishing rod, but the only difference is that you cannot catch it with it. big fish. After all, the pleasure is not in what kind of fish you catch, but in the very process of fishing.

Materials for a homemade fishing screen

If you haven't changed your mind and still want to make a fishing screen, let's get started. This will require the following materials:

float made of foam;
a metal bar or, as they call it in another way, a bar;
wooden rail;
fishing line;
mesh fabric;
kapron thread or cord.

Stages of manufacturing a fishing screen

To make a fishing screen, you will need a square or rectangular frame. You can choose the sizes by eye. The dimensions depend on the depth of the reservoir and the place where you are going to throw it.
The float or top of the screen is made from a bamboo or wooden stick that needs to be varnished. This process is necessary so that the wooden structure does not swell in water. You can, of course, not varnish, but this can subsequently destroy the structure. The weight or lower part must be made of heavy materials to immerse the screen to the bottom of the reservoir. For the bottom of the fishing screen, you can use a metal bar. Then we cut the canvas from the grid to the size of the prepared frame in the lower and upper parts of the canvas and pull the cord. This must be done on each cell, or at least through one.
When you have a cooked frame, you need to fasten a mesh fabric to it using a strong thread. This is done in the following steps: first, we fix the end of the thread to the bamboo stick, then the mesh cell must be tied in other places with the help of a thread. And so it continues until the mesh canvas is completely fixed to our frame. A similar procedure must be done with a metal twig.
After that, from the side of the canvas, we skip the prepared thread in the form of a spiral, starting from a stick and ending with a bar, while not a single cell can be skipped. This is necessary in order to relieve the tension of the net under water, and during the raising of the net to the surface of the water.
We fix the cord on the stick in the middle, then we hook the float to it, for the manufacture of which foam plastic was used. The presence of a float is necessary in order to know where the fishing screen is located.

On a note: a net made from fishing line is the most catchy compared to a net made from twisted rope, while a net that was made from fishing line has a shorter service life than a net cloth.

When fishing on a fishing screen, it is worth knowing a few tricks, which we will discuss below. The size of the fish caught depends on the size of the cell used. When using a 18 mm cell, a small fish comes across that is suitable for bait when hunting a predator. If you use a 24 mm cell, then there is a chance to catch big fish. Whatever cell you use, you always need to feed the fish, then you will get a good catch for the fish soup and a wonderful outdoor recreation.

How to make a TV for fishing a fishing screen with your own hands is not difficult for a good fisherman to make if you carefully read our article. For the angler, fishing tackle is an important attribute. Nowadays, they are diverse for any period of the year. Today we want to talk about tackle, which has been familiar to many since childhood, because of its ease of manufacture and low cost, fishing enthusiasts often use it. The article will be about how to make a fishing TV or even very often in many regions of the CIS it is called a fishing screen for good fishing. I don't even know why so many years have been chasing this fishing tackle like a fishing TV. You won’t catch a big catch on it, except perhaps on the ear, it doesn’t cause any severe damage to the fish, it doesn’t pollute the ecological environment, in general, the catch is not much different from fishing with a fishing rod or spinning, except that you won’t catch a large catch on a fishing TV, but definitely that fishing in this case will be a great getaway for many.

We will not rant about how it is right and what is possible, let's start making a fishing TV, for this we need:

foam float
wooden lath
Weight (metal bar)
Net fabric
fishing line
Cord or kapron thread.

Making a fishing TV:

To make a fishing TV, we make a rectangular or square frame. Its dimensions are usually made 1.5 by 1.5 meters or 1.5 meters long and 1.0 meters wide, depending on how deep the reservoir is at the casting site. Many craftsmen select sizes that correspond to previously looked after places.
The upper part of the TV (float) is made from an ordinary wooden slat or bamboo stick, in our case one and a half meters long. It is advisable to cover it with varnish so that it swells less in water. The lower part (weights) must be made of heavier material so that the screen sinks to the bottom. A metal rod works well for this. We cut the mesh fabric to the size of the prepared frame, while paying attention that the cells in the unfolded state should be square. In the upper and lower parts of the canvas, we pass a nylon thread through each cell.
We attach the mesh fabric to the finished frame with a strong thread. We do it this way, at the beginning of a bamboo stick or slat we fix one end of the thread, tie the mesh cells in several places with a nylon thread to the end of the slat. We do the same procedure with a metal bar.
Next, we thread a nylon thread or cord in a spiral from a bamboo stick to a metal bar in the side of the canvas, without missing a single cell. This is necessary to relieve the tension of the mesh in the water and when it is raised to the surface.
We tie a cord or nylon thread to the upper wooden rail in the middle and attach a foam float to it so that we can see the place on the surface of the water where our fishing TV is installed. It is worth noting that a fishing line net will be more catchy than a silk thread or twisted rope, but the service life of a fishing line net is less than that of a net cloth.

The size of the caught fish depends on the size of the cell, if the cell is 18 mm, then this is a medium-sized catch, such a fish will be good as a bait for a predator. And if 24 mm, then your prey will be larger. Whatever method you fish with, don't forget to feed your fishing grounds. Then your fishing trip will end with an excellent fish soup and a wonderful dinner in nature.

There are two ways to install a fishing screen:

The first is from the shore, then a rope is tied to a stick or pole, with the help of it, after the catch, you can deliver the TV to the shore.
The second from the boat, then it is lowered by a nylon thread with a float to the desired installation location. Mostly screens are caught on open water.

It is also possible to fish in the holes in the winter, but this method is better suited fishing scarf. Its manufacturing principle is identical to the TV, but the canvas has a triangular shape and instead of a wooden lath, a float is installed at the top point.

Good luck fishing, and do not abuse the possibilities when catching screens.

rybsoveti.ru

Screen for catching fish with your own hands

Some anglers basically fish exclusively with rods for their own pleasure. And others prefer to take it easy and use a fish screen that is easy to make and use, and inexpensive. In this article, you will learn how to make a DIY fishing screen, because many fishermen prefer to make their own fishing screen.

A fishing screen is a popular rectangular or square-shaped device that belongs to artisanal fishing gear. Because of its shape, it is also called "fishing TV". The fishing screen allows you to catch fish without difficulty, especially small ones (for bait).

Fishing screens are best installed on reservoirs, ponds, rivers, where there is no current, and especially on warm spring and summer days. But this does not mean that in winter it is impossible to catch in this way. There is a so-called fishing scarf, the principle of its manufacture is the same, but it has a triangular shape, which falls into the hole and a float is used as a wooden block.

fishing screen

You can install such gear in two ways:

on open water from a boat or boat;
near the coast, from the bridge, from the dam.

It is much easier to catch fish from a boat, as you can choose any place to catch a fish in a pond and calmly throw the tackle behind a strong thread with a float. In any case, installing a TV from a boat will be more effective than from the shore because of the reeds. You have to additionally make a wooden pole with a rope. At the end of the rope, attach a hook that could catch on a fishing line or cord floating in the water, and thus get the TV.

Legality of fishing

Fishermen are fined for using fishing screens. Although this method does not provide for a large catch of fish, as with the help of other gear or nets, the regulatory authorities still strictly monitor the conservation of most fish species. Sometimes fishermen think that since they have small do-it-yourself fishing TVs, this does not concern them. But everyone should remember that during the spawning period, you need to refrain from fishing. During this period, prepare all your belongings in order for the new season.

Screen device

Instructions for making a fishing screen

Every real fisherman sooner or later he will think about how to make a TV for fishing with his own hands. To do this, he will need the following materials:

float made of light material (polystyrene);
plastic tube, wooden block (bamboo stick);
mesh fabric;
cargo (metal bars);
fishing line, kapron threads, cord.

Let's consider in more detail step by step instructions how to make a screen for fishing:

Usually the width and length of the fishing TV is 1.5 meters. But depending on the depth of the reservoir, the length of the screen is sometimes increased;
In the manufacture of the upper part (float), a sealed plastic tube or a flat wooden block coated with waterproof varnish or paint is used;
As the lower part, a load of metal rods is used so that the screen can be easily lowered to the bottom of the reservoir. Some fishermen additionally attach bait in the center of the screen;
The next step is to prepare the mesh fabric, which must match the size of the frame. The dimensions of the cells of the mesh fabric depend on the purpose of the purpose and the use of such gear. As a rule, they have sizes from 15 to 50 mm;
The finished mesh fabric is attached to the upper and lower parts of the frame with a strong nylon thread that passes through each mesh cell. For effective fishing, the net cloth should be made of thin high-quality threads so that the screen is not visible in the water, and also not strongly pulled over the metal frame;
On both sides of the upper part of the frame, two nylon or fishing lines are attached, which smoothly turn into a cord or thick fishing line with a size of at least 0.7 mm, at the tip of which a foam plastic float floating on the surface of the water is tied. This is necessary in order to determine the location of the TV and find out if the fish is caught;
DIY fishing screen is ready to use. Although such tackle does not differ in durability, it does not cause harm to other fish and water resources does not pollute.

handf.mirtesen.ru

How to make a fishing screen

A fishing screen is a small home-made fixed net, which is commonly called the simple word “TV”. This network got its name due to the fact that in its shape it resembles a flat-panel TV.
The screen itself is a simple mechanism. First, a TV frame is made - a rectangular frame. Its sides should reach an average of 1.5-2 meters in length. The top of the screen can be made from a regular rail or a wooden block. The lower one is made of a heavier stick (you can also use a rail). The upper and lower composite screens ensure its reliable fixation in still water and in a small current. A network fabric is attached to the finished frame with a strong thread. The thread must be fixed at the beginning of the stick (slats) and begin to put the cells on the thread and tie it to the stick. Here it is worth remembering that the smaller the thickness of the thread of the mesh fabric, the more fish can be caught. Fishing nets are more catchy, but they are not so durable. Net fabric is made of braided cord or twisted rope.

Each cell of the canvas is tied to the edge in a spiral. The thread is threaded from the top to the bottom, without missing a single cell, thereby stretching into a straight line. The network will work the more efficiently, the lower the tension of the net fabric. Also, the length of the thread between the top and bottom will directly depend on the height of the fishing screen.

On a centimeter from the edge of the rails on both sides, loop knots must be made to secure the ends of the screen and the net thread. A load is attached to the bottom of the assembled canvas. In the upper part, a fishing line with a float is usually attached. It will be on the surface of the water and indicate that a fish has been caught. You can install a rigid float in the form of a stick dried and painted with waterproof paint. The fishing screen is installed in two ways: it is lowered on a fishing line or rope from a boat, or it is cast from the shore. A long rope is tied to one of the ends of the screen, with which the structure can be easily pulled ashore. If several fishing screens are installed, they must mark in some way the place where they are located so that they can be easily found later. A computer screen is measured in inches and the number of pixels that can be displayed horizontally and vertically on the display. The physical size in inches cannot be reduced, but you can set a smaller number of pixels, i.e. reduce the screen resolution, it is quite possible. To do this, follow these steps. Right-click on an empty space on your desktop. In the drop-down menu, select the "Personalization" item (in the Windows XP operating system and earlier versions, this item is called "Properties"). You will see a component that allows you to configure appearance screen. Click on the "Display Options" section. In the window that opens, move the "Resolution" slider to the left. In this case, below will be displayed to what value the screen resolution has decreased. For example, at first it was 1280 × 800, and now it is 640 × 480 pixels (dots). Click "OK" to save your changes. The screen will turn off for a few seconds and then turn on with the new resolution. Windows will ask you to confirm the new display settings within 10 seconds, otherwise they will return to the previous ones. Click "OK" if you are satisfied with them. It is safest for your eyesight to use the screen at the maximum resolution of the monitor.

vkontakte how to make a big screen

Fine-mesh nets (with a mesh of less than 20 millimeters) are used for catching small fish. The larger the network, the large sizes fish can get caught.

The fishing screen is rarely used as an independent tackle. He usually does secondary functions.

how to make a fishing net

How to make a fishing screen

www.kakprosto.ru

Homemade fishing screen - easy and simple!

A good angler has in his arsenal many varieties of tackle, lures and other accessories for any fishing season. In addition, any professional angler needs to have such a fishing device as a fishing screen in their fishing gear. Many fishermen have known him since early childhood. It is easy to make and does not require a large investment to make it. Since not all fishermen have enough money to buy it in a fishing store, let's see how you can make a homemade fishing screen or, as it is called in another way, a fishing TV, right at home and save your hard-earned money.

In fact, you should not expect a big catch with the help of a fishing screen, but both adult fishermen and children love this device very much. With it, you can catch enough fish in your ear or just fry, but the most important feature of the fishing screen is that it does not pollute the fish habitat, that is, the reservoir, and does not harm the fish. You can catch about the same amount of fish with this device as with a spinning rod or a fishing rod, but the only difference is that you cannot catch large fish with it. After all, the pleasure is not in what kind of fish you catch, but in the very process of fishing.

Materials for a homemade fishing screen

If you haven't changed your mind and still want to make a fishing screen, let's get started. This will require the following materials:

float made of foam;
a metal bar or, as they call it in another way, a bar;
wooden rail;
fishing line;
mesh fabric;
kapron thread or cord.

Stages of manufacturing a fishing screen

To make a fishing screen, you will need a square or rectangular frame. You can choose the sizes by eye. The dimensions depend on the depth of the reservoir and the place where you are going to throw it.
The float or top of the screen is made from a bamboo or wooden stick that needs to be varnished. This process is necessary so that the wooden structure does not swell in water. You can, of course, not varnish, but this can subsequently destroy the structure. The weight or lower part must be made of heavy materials to immerse the screen to the bottom of the reservoir. For the bottom of the fishing screen, you can use a metal bar. Then we cut the canvas from the grid to the size of the prepared frame in the lower and upper parts of the canvas and pull the cord. This must be done on each cell, or at least through one.
When you have a cooked frame, you need to fasten a mesh fabric to it using a strong thread. This is done in the following steps: first, we fix the end of the thread to the bamboo stick, then the mesh cell must be tied in other places with the help of a thread. And so it continues until the mesh canvas is completely fixed to our frame. A similar procedure must be done with a metal twig.
After that, from the side of the canvas, we skip the prepared thread in the form of a spiral, starting from a stick and ending with a bar, while not a single cell can be skipped. This is necessary in order to relieve the tension of the net under water, and during the raising of the net to the surface of the water.
We fix the cord on the stick in the middle, then we hook the float to it, for the manufacture of which foam plastic was used. The presence of a float is necessary in order to know where the fishing screen is located.

On a note: a net made from fishing line is the most catchy compared to a net made from twisted rope, while a net that was made from fishing line has a shorter service life than a net cloth.

Fishing Screen Installation Methods

There are two ways to install a fishing screen:

The first installation method is from the shore. In this case, you need to tie a rope to the screen body and throw it into the pond, and when you need to pull it out, it is enough to pull the rope towards you and the screen will come out.
The second way is from a boat. In this case, the screen is lowered to the bottom of the reservoir using a nylon thread with a float in any desired place.

It should be noted that in most cases the fishing screen is used from a boat in the middle of the reservoir. And remember that you should not abuse the capabilities of the fishing screen.

fishing screen

You can install such gear in two ways:

on open water from a boat or boat;
near the coast, from the bridge, from the dam.

It is much easier to catch fish from a boat, as you can choose any place to catch a fish in a pond and calmly throw the tackle behind a strong thread with a float. In any case, installing a TV from a boat will be more effective than from the shore because of the reeds.

You have to additionally make a wooden pole with a rope. At the end of the rope, attach a hook that could catch on a fishing line or cord floating in the water, and thus get the TV.

Legality of fishing

Sometimes fishermen think that since they have small do-it-yourself fishing TVs, this does not concern them. But everyone should remember that during the spawning period, you need to refrain from fishing.

During this period, prepare all your belongings in order for the new season.

Screen device

Instructions for making a fishing screen

Every real fisherman will sooner or later think about how to make a TV for fishing with his own hands. To do this, he will need the following materials:

float made of light material (polystyrene);
plastic tube, wooden block (bamboo stick);
mesh fabric;
cargo (metal bars);
fishing line, kapron threads, cord.

Let's take a closer look at step-by-step instructions on how to make a fishing screen:

Usually the width and length of the fishing TV is 1.5 meters. But depending on the depth of the reservoir, the length of the screen is sometimes increased;
In the manufacture of the upper part (float), a sealed plastic tube or a flat wooden block coated with waterproof varnish or paint is used;
As the lower part, a load of metal rods is used so that the screen can be easily lowered to the bottom of the reservoir. Some fishermen additionally attach bait in the center of the screen;
The next step is to prepare the mesh fabric, which must match the size of the frame. The dimensions of the cells of the mesh fabric depend on the purpose of the purpose and the use of such gear. As a rule, they have sizes from 15 to 50 mm;
The finished mesh fabric is attached to the upper and lower parts of the frame with a strong nylon thread that passes through each mesh cell. For effective fishing, the net cloth should be made of thin high-quality threads so that the screen is not visible in the water, and also not strongly pulled over the metal frame;
On both sides of the upper part of the frame, two nylon or fishing lines are attached, which smoothly turn into a cord or thick fishing line with a size of at least 0.7 mm, at the tip of which a foam plastic float floating on the surface of the water is tied. This is necessary in order to determine the location of the TV and find out if the fish is caught;
DIY fishing screen is ready to use. Although such tackle does not differ in durability, it does not cause harm to other fish and does not pollute water resources.

A fishing screen is a small home-made fixed net, which is commonly called the simple word “TV”. This network got its name due to the fact that in its shape it resembles a flat-panel TV.

The screen itself is a simple mechanism. First, a TV frame is made - a rectangular frame.

Its sides should reach an average of 1.5-2 meters in length. The top of the screen can be made from a regular rail or a wooden block.

The lower one is heavier from a stick (you can also use a rail). The upper and lower composite screens provide its reliable fixation in still water and in small currents.

A network fabric is attached to the finished frame with a strong thread. The thread must be fixed at the beginning of the stick (slats) and begin to put the cells on the thread and tie it to the stick.

Here it is worth remembering that the smaller the thickness of the netting thread, the more fish you can catch. Fishing nets are more catchy, but they are not so durable.

Net fabric is made of braided cord or twisted rope.

On a centimeter from the edge of the rails on both sides, loop knots must be made to secure the ends of the screen and the net thread. A load is attached to the bottom of the assembled canvas.

In the upper part, a fishing line with a float is usually attached. It will be on the surface of the water and indicate that a fish has been caught.

You can install a rigid float in the form of a stick dried and painted with waterproof paint. The fishing screen is installed in two ways: it is lowered on a fishing line or rope from a boat, or it is cast from the shore.

At one end of the screen, a long rope is tied, with which the structure can be easily pulled ashore. If several fishing screens are installed, be sure to mark in some way the place where they are located, so that later they can be easily found.

A computer screen is measured in inches and the number of pixels that can be displayed horizontally and vertically on the display. The physical size in inches cannot be reduced, but you can set a smaller number of pixels, i.e. reduce the screen resolution, it is quite possible.

To do this, follow these steps.

Right-click on an empty space on your desktop. In the drop-down menu, select the "Personalization" item (in the Windows XP operating system and earlier versions, this item is called "Properties").

You will see a component that allows you to customize the appearance of the screen. Click on the "Display Options" section.

In the window that opens, move the "Resolution" slider to the left. In this case, below will be displayed to what value the screen resolution has decreased.

For example, at first it was 1280 × 800, and now it is 640 × 480 pixels (dots). Click "OK" to save your changes.

The screen will turn off for a few seconds and then turn on with the new resolution. Windows will ask you to confirm the new display settings within 10 seconds, otherwise they will return to the previous ones.

Click "OK" if you are satisfied with them. It is safest for your eyesight to use the screen at the maximum resolution of the monitor.

vkontakte how to make a big screen

Fine-mesh nets (with a mesh of less than 20 millimeters) are used to catch small fish. The larger the net, the larger the fish can be caught.

The fishing screen is rarely used as an independent tackle. It usually performs auxiliary functions.

how to make a fishing net

www.kakprosto.ru

Proportions of rice and water for the perfect dish.

The most delicious barbecue recipe ever! TOP - 10 most mushroom places of the Samara province. Do-it-yourself PVC boat awning.

Catching pike on a twister. As a rule, fishing screens are used in the summer, when nothing interferes with their installation.

How to screen fish or the "grandfather" method

They are installed on ponds, in bays, in backwaters of rivers, but the use of screens on the course is quite problematic. In conclusion, I would like to say that fishing screens are a part of passive fishing that many fishermen do not tolerate in principle, preferring active types of fishing, as well as fishing with float rods or feeder gear.

Simplicity of design, the ability to assemble it yourself, cheapness when buying, for example, in my region they offer screens from r for the product, this attracts fishermen. Now let's talk about ease of use. It would seem that throw the screen into the water and wait for the catch. Of course, having previously secured to the shore. Although they are not so obvious and require a margin of time.

A set of lures 34 items. What you need to know when going fishing Algae and fish bait Let's talk about the lack of bite Aromatic bait - choose according to your taste Picker's equipment and bait when fishing Let's talk about bait and its preparation.

The fishing screen has a very simple design, consisting of a rectangular frame measuring 1.5x1.5 meters. The frame is made of any material: wood, metal, etc. The frame is made in such a way that the screen is securely held both in still water and in the current. This tackle requires a load, so many anglers weld a frame of metal rods with a diameter of 6-8mm. The design turns out to be moderately light and interesting: not as massive as it turns out from wooden beams.

A woven mesh fabric is attached to a metal or wooden frame. We can immediately say that the thinner the material of the net fabric, the more attractive tackle for fish. The canvas is attached to the frame with a strong artificial thread. In this case, it is necessary to fix each cell of the canvas.

There is one caveat here: do not stretch the canvas. The more it sags, the more effective the tackle will be. Loops are formed at the corners of the screen for applying a powerful rope to them, with which the screen is pulled out of the water. The design is as follows: a piece of rope, up to 1.5 meters long, is tied to the loops, after which all four ropes are tied into one knot, and a longer rope is tied to this knot. It allows you to pull the fishing screen out of the water without problems.

A load is attached to the bottom of the canvas, which sags the mesh, otherwise the screen will not be effective without it.

The fishing screen is cast either from the shore or from a boat. Moreover, the technology of its use is such that it must be suspended in the water column, otherwise there will be no sagging of the network fabric. This is easy to organize from a boat, but if you fish from the shore, you will have to experiment a little. You can tie a long stick to a rope and use it to lower the screen into the water.

Homemade fishing screen - easy and simple!

If you haven't changed your mind and still want to make a fishing screen, let's get started. This will require the following materials:

float made of foam;
a metal bar or, as they call it in another way, a bar;
wooden rail;
fishing line;
mesh fabric;
kapron thread or cord.

Many fishermen have known him since early childhood. It is easy to make and does not require a large investment to make it.

Since not all fishermen have enough money to buy it in a fishing store, let's see how you can make a homemade fishing screen or, as it is called in another way, a fishing TV, right at home and save your hard-earned money.

In fact, you should not expect a big catch with the help of a fishing screen, but both adult fishermen and children love this device very much. With it, you can catch enough fish in your ear or just fry, but the most important feature of the fishing screen is that it does not pollute the fish habitat, that is, the reservoir, and does not harm the fish.

You can catch about the same amount of fish with this device as with a spinning rod or a fishing rod, but the only difference is that you cannot catch large fish with it. After all, the pleasure is not in what kind of fish you catch, but in the very process of fishing.

Stages of manufacturing a fishing screen

To make a fishing screen, you will need a square or rectangular frame. You can choose the sizes by eye. The dimensions depend on the depth of the reservoir and the place where you are going to throw it.
The float or top of the screen is made from a bamboo or wooden stick that needs to be varnished. This process is necessary so that the wooden structure does not swell in water. You can, of course, not varnish, but this can subsequently destroy the structure. The weight or lower part must be made of heavy materials to immerse the screen to the bottom of the reservoir. For the bottom of the fishing screen, you can use a metal bar. Then we cut the canvas from the grid to the size of the prepared frame in the lower and upper parts of the canvas and pull the cord. This must be done on each cell, or at least through one.
When you have a cooked frame, you need to fasten a mesh fabric to it using a strong thread. This is done in the following steps: first, we fix the end of the thread to the bamboo stick, then the mesh cell must be tied in other places with the help of a thread. And so it continues until the mesh canvas is completely fixed to our frame. A similar procedure must be done with a metal twig.
After that, from the side of the canvas, we skip the prepared thread in the form of a spiral, starting from a stick and ending with a bar, while not a single cell can be skipped. This is necessary in order to relieve the tension of the net under water, and during the raising of the net to the surface of the water.
We fix the cord on the stick in the middle, then we hook the float to it, for the manufacture of which foam plastic was used. The presence of a float is necessary in order to know where the fishing screen is located.

On a note: a net made from fishing line is the most catchy compared to a net made from twisted rope, while a net that was made from fishing line has a shorter service life than a net cloth.

Fishing Screen Installation Methods

There are two ways to install a fishing screen:

The first installation method is from the shore. In this case, you need to tie a rope to the screen body and throw it into the pond, and when you need to pull it out, it is enough to pull the rope towards you and the screen will come out.
The second way is from a boat. In this case, the screen is lowered to the bottom of the reservoir using a nylon thread with a float in any desired place.

It should be noted that in most cases the fishing screen is used from a boat in the middle of the reservoir. And remember that you should not abuse the capabilities of the fishing screen.

Below we will talk about what a screen is in general in the language of anglers and how to use it in different places of fishing. Let's start with a definition.

The screen is a device for catching fish, which in most cases is a rectangular mesh cloth, to one side of which a bamboo stick (float) is tied, to the opposite side - a metal rod (weight). It's actually in the photo below.

There is also another form. It is less productive, but more inconspicuous and easier to operate. triangular fishing screen

This design is a bit simpler in terms of the fact that instead of a bamboo stick, you can use a piece of foam or a bottle as a float, which is less noticeable.

That is, the plus of this design: stealth

Cons: smaller footprint

What can be said directly about the technique of fishing on the screen.

Perhaps the most suitable installation site is a calm canal with a depth of 0.5-1.5 meters or a small stream.

It is better to place the screen parallel to the flow of the river. In this position, the likelihood of damage to the tackle by floating snags and other debris is small.

The size of the estimated fish depends on what cell size is on your screen.

Since basically the fish comes across and remains in the net after it sticks its head into the cell and catches on the gills. Therefore, if medium-sized fish predominate in the reservoir, then the cell should be appropriate.

As with any method of fishing, do not forget about bait. You can read about which one to use here.

If you expect to put up several screens in the evening, and, having removed them in the morning, to catch at least half a bucket of fish, then you will need to install from 10 to 50 screens at the same time. With a little practice, you can fit in a couple of hours by installing all 50 screens.

Optimal size screen 1.5 x 1.5 meters. The store sells less, but we do not recommend them. If fishing on screens takes place in shallow water, then you can use oblong LCD screens))) measuring somewhere around 1 X 1.5 meters.

Fish that can be caught on the screen: chub, murzak, black belly, barbel, crucian carp, vobla, roach, perch, etc.

Have a good bite!

Screen fishing, 8.7 out of 10 based on 35 ratings

fishinggold.ru

Screen fishing in summer (screen fishing)

Proportions of rice and water for the perfect dish.

The most delicious barbecue recipe ever! TOP - 10 most mushroom places of the Samara province. Do-it-yourself PVC boat awning.

Catching pike on a twister. As a rule, fishing screens are used in the summer, when nothing interferes with their installation.

They are installed on ponds, in bays, in backwaters of rivers, but the use of screens on the course is quite problematic. In conclusion, I would like to say that fishing screens are a part of passive fishing that many fishermen do not tolerate in principle, preferring active types of fishing, as well as fishing with float rods or feeder gear.

How to make a TV for fishing a fishing screen with your own hands

Therefore, they are suitable for people with a large margin of time, say pensioners or schoolchildren at the time of the summer holidays for three months, this is not very suitable for few people on vacation, if there are other plans besides fishing and family .... Today we want to talk about tackle, which has been familiar to many since childhood, because of its ease of manufacture and low cost, fishing enthusiasts often use it. The article will be about how to make a fishing TV or even very often in many regions of the CIS it is called a fishing screen for good fishing. Catching Fish on Screens in the River Snezheti [Catching Fish on Screen Video] A unique way of catching fish! Funny fishing when the fish does not bite at all! The beauty was lucky to fish but she is clearly afraid of the reaction of the fish to feeding with a feeder and balls underwater video, winter fishing Catching on the screen Self-expanding spider for winter fishing Three-walled TV screen for catching fish with cutting Motivation for fishing in the WINTER ON BUCKLES Catching fish in winter Screen fishing and bait trolling. Only for a beginner at first, unknown tackle can cause a lot of inconvenience.

Catching fish on the screen

In fact, the advantage of catching on the screen is, for example, that during catching you can additionally cast a fishing rod or spinning rod. A fish caught in your screen will not be able to get out of it until the arrival of the fisherman. However, before acquiring such a device, it should be remembered: This does not at all depend on the fact that it is caught on it much less than on a net or even on bottom fishing rod. So, before you learn how to catch fish with a screen, you need to learn the device and the principle of operation of this device itself. If it is too high, then a hard spinning rod with a reel is used, or a telescopic rod with the upper knees removed. Seeing that the float twitched, danced on the water, the catcher raises the tackle and, if he does not see the fish entangled in the cells of the net, immediately lowers it. Obviously, successful fishing is possible only where there are a lot of large bleaks and they are hungry. Where large bleak abounds, but for some reason it is full, which happens quite rarely, sometimes pieces of cake or crackers are tied to the float as bait, dropping unrefined sunflower oil on them, but the results of fishing with natural bait are always more modest.

Tips for catching catfish on a kwok

Casting syringes silicone lures

Buy adapter for boat pvc

How to throw inertialess

Even catching bleak on top of float rod more interesting, there at least there is a chance for a bite of a chub-face or a roach that has risen to the surface .... Occasionally this actually happens, but it is still better to catch predators with gear specially designed for them. See the general scheme of the track. The net itself is usually not involved in casting: The weight of the carabiners is compensated by two large foam floats, they also help to ensure that the residual tension of the elastic band does not prevent the net from standing in the water in the correct rectangle.

The mesh spacing depends on the size of the intended production. Naturally, the small size of the net makes it possible to achieve good catches only with excellent knowledge of the reservoir and the habits of the fish inhabiting it.

avtoelektrik-bobrov.ru

Fishing on the screen in the summer from the shore: a screen for catching fish with your own hands

How to screen fish or the "grandfather" method

Add Comment Cancel reply Your email address will not be published. Site Search Find: This site is powered by a WordPress theme by WP Blogs. Although this method does not provide for a large catch of fish, as with the help of other gear or nets, the regulatory authorities still strictly monitor the conservation of most fish species.

American fishing rods

Buy a pvc boat in Novosibirsk cheap

How to clip a feeder

Overview of spinning rods for twitching

Catching a goby on the Sea of Azov. Leave a Reply Cancel reply Your email address will not be published. Cruel Catching Fish is just Uzha. CATCHING ON THE SCREENS 3. In order to even out the order, the movement of the boats must be slowed down, from time to time rowing the oars in the opposite direction. When fishing with a float in half-water, the net is supported at a given depth by additional buoys attached to the net on buoy lines or buoy thins.

By taking a longer or shorter length of the buoy line, you can lower the net deeper or, conversely, raise it closer to the surface, depending on the horizon on which the fish is holding. Buoys used to be so-called kukhtyls, now plastic lemonade and beer bottles are widely used. The fluent river network is a rectangular mesh with a mesh size corresponding to the size of the expected production.

Such a dense landing increases the catchability of the net. To increase catchability, sometimes the net is planted only on the upper, floating cord, while the net hangs freely, like a curtain on a window. Such smooth networks are called self-floating. If the net is designed to float on the surface of the water, then the floating cord must hold the net and weights in the water. At the same time, at least a double margin of buoyancy is provided. Bottom part should be relatively heavy, in order to achieve this, it will be possible to attach a load to the bottom; this should be done only if the weight of the bottom bar is rather small. Top part should be afloat and indicate that the fish has hit the screen. A stick well dried and painted with waterproof paint can serve as a float. As a rule, a long rope is tied to the top of the screen, with which it can be easily removed from the water. When throwing several screens, their location must be marked in some way in order to easily navigate and find them. So, we can say that for the manufacture of the screen, the main materials are: Switch to English sign up. Learning to knit fishing nets and screens.

Catching fish on video screen

The fishing TV screen is a small fixed net, usually 1 meter in length. Its device is very simple: Despite this, craftsmen make two-, three-wall, as well as frame options. For catching live bait, a wicker net with a minimum mesh size is used. Despite the ban, fishing with such folk nets continues to this day.

Watch your favorite TV shows - download Eye TV Russian version