The best pvc boats rating. The best boats for fishing: rating and review of the best models. Boats with inflatable keel

Gathered for fishing, and the old watercraft finally broke through? Yes, I just want to reach the fishing place with a breeze, and not rub calluses with oars. A large selection of boats of different materials, designs, but one of the best are modern, reliable PVC boats with a low pressure inflatable bottom. ?

Disadvantages of PVC boats with NDND:

the center of gravity of a standing fisherman is high due to the inflatable bottom. There is a high probability of a coup;
with a good length, the size of the working area is small, this characteristic should be taken into account, and not the overall length when choosing.

Advantages of PVC boats with NDND:

low pressure inflatable bottom, softens impacts on the water when moving. This lowers the vibration;
will require a little time spent on assembly, pumping gondolas, bottom;
very high level of thermal insulation. In cold weather, every angler will appreciate this quality; an inflatable bottom will allow you to get to the shore, with the gondolas lowered.

What to look for when choosing a model best PVC boat with low pressure inflatable bottom ?!

The capacity of a PVC inflatable boat is one of the main selection criteria. When buying for a company of more than 3 people, for the engine, rigid attachment points to the body must be installed.

In general, experienced anglers do not use heavy trucks. Things 3 people during transportation will occupy the entire space of the cockpit. The best option is a boat for one or two fishermen. In this case, it gives a convenient and comfortable place for fishing.

Top 5 rating of the best pvc boats with low pressure inflatable bottom

We give the leading positions here to the manufacturers of boats of the Pilot, Flagman, Profmarine, Cayman, Apache brands.

No. 1 Pilot M-330

PVC motorboat with NDND is manufactured by Kovcheg and is produced with a low power motor.

A bar (applied on the keel) made of PVC with a width of 60 millimeters is a protective device that protects against material abrasion;
The inner surface of the working compartment is reinforced with additional tapes for structural rigidity, as well as to prevent rubbing of the gondola during movement;
Five-layer reinforced fabric with high level density;
Possibility of installation of a safety loop for the motor;
Plastic transom mount holder;
Reinforced bottom;
Light weight;
Warranty 2 years.

Specifications	Meaning
Length cm	330
Width, cm	154
Cockpit length, cm	205
Cockpit width, cm	71
Board diameter, cm	42
Number of compartments	3+1 (NDND)
Weight (included), kg	48
Transom height, cm	38,5
Capacity, persons	3
Maximum load capacity, kg	450
Maximum motor power, hp	10/15
Maximum motor weight, kg	37,5
Boat packing size, cm	1157020
Equipment	Quantity, pcs
Fur volume 5 l	1
repair kit	1
Packing bag	1
Seat	2
hard slate	1
Aluminum paddle	2

Equipped with a protective bar on the sides. This protects against damage when mooring and parking.

Adjustable seat for easy casting.

The disadvantages of this boat include its small carrying capacity.

The price of the popular boat Pilot M-330 starts at 25,000 rubles.(The cheapest NDND PVC boat in our ranking).

№2 Boat Flagman 350L

Is issued in a complete set:

Boat bag;
Banks (seats) 2 pcs.;
Pomp (pump);
repair kit;
Oars.

The merit of the designers is the large interior space. It does not lose its mobility during transportation.

Its main advantages are:

Fishing on the lake, rafting on the river or just a walk along the reservoir - all this can be done with comfort and safety only on one of the best PVC boats presented in this rating. Such boats are very convenient, because they can be lowered, disassembled and taken with you even in your hands at any time. But here you need to keep in mind that a huge selection can easily confuse even an experienced buyer. Therefore, we present you this TOP, compiled according to the results of feedback from product owners.

by the most the best manufacturers boats can be called:

The ark- immediately offers a number of series of products "Lotsman", he independently develops them, and produces, and sells them. To do this, the company uses fabrics based on polyvinyl chloride with several layers from the well-known brands Mirasol and Scantarp.
Boat Master is a Russian manufacturer of inflatable small-sized floating vehicles. The main office and production are located in Ufa, Russia. It was founded in 1993 and during this time created several brands: Riviera, Aqua, Taimen and some others. She has several patents, certificates and awards for the production of quality products.
Admiral is another company with a selection of boats for traveling on the river, lake and even out to sea, for the latter there is a special series of products. Some of them can be up to 5 m long and accommodate more than 3 people, this is not often seen.
Frigate- The company released the first inflatable watercraft made of polyvinyl chloride in 1991. Today in its assortment there are series for children, with NDND (inflatable bottom) of economy and premium class.

Rating of the best PVC boats

Its compilation would not have been possible without feedback from the owners of such small rubber boats. When analyzing them, we took into account how convenient, safe, useful and practical one or another model is, and also whether its quality corresponds to the established price.

From specifications were taken into account:

Weight, width, depth, shape and length of the product;
The height of the sides, it depends on it whether water will get inside;
Type of stern, whether it is raised, as this gives additional stability;
Maximum supported weight;
Number of seats;
The quality of fittings, including oars and barrels;
Bottom type (inflatable or rigid);
Equipment;
The strength and quality of the fabric, the number of layers;
Recommended motor power;
The number of air compartments and the size of the cylinders;
Color.

Best PVC Inflatable Rowing Boats

Such models are usually not very expensive, they cost several times less than those designed for a motor. Most often, they are characterized by a simple design and small size. They are mainly used by fishermen or hunters, but for long rafting this is not the best option.

Pilot C-200

Let's start the review with this offer, which in our ranking can be called the best for fishermen who are going to sail alone. This single model has a non-inflatable bottom made of a thick layer of reinforced PVC. Therefore, it is not surprising that the reviews write about the convenience of catching fish even while standing. Naturally, the product is small and due to this it is very light, but at the same time it keeps quite reliably on the water, does not roll over and feels confident when cornering.

The model "Pilot C-200" has a well-located seat, almost in the middle. But sitting on it for a long time due to its rigidity can be uncomfortable. Since this is a rowing-type watercraft, the set includes two oars, which are recognized as comfortable enough for long-term use. Separately, it should be noted high quality seams, butted and reinforced with fabric, which makes the alloy even safer.

Advantages:

Feels confident on small waves;
Strong sidewalls;
Maneuverability;
Light weight;
Strength of materials;
There are several colors.

Flaws:

Load capacity below average (100 kg);
small oars;
The two people on board are still cramped.

The boat "Pilot C-200" weighs just under 9 kg, which makes it easy to transport. She will always be safe and sound thanks to the presence of a backpack in the kit.

Aqua Optima 260

This is one of the strongest and lightest models in our ranking. Its owners note in the reviews that the air in it is held securely, it is inflated easily and, if necessary, deflated without any problems. True, her bottom is not inflatable. The reliability of this option lies in the fact that it can stay afloat even if one of the compartments is punctured, since there are two of them.

The boat Aqua Optima 260 does not have a keel, but despite this, it keeps quite well on the turns. It is quite easy to manage it with the help of oars that come with a pump, oarlocks, and a handrail cable. Of the minuses, hard, uncomfortable seats can be distinguished.

Advantages:

Light weight without equipment;
Excellent handling;
Hardware quality;
Good gluing of seams;
budget model.

Flaws:

There is too little space for two;
The seats are very close to each other;
Oars while rowing can shift and fly off.

The length of the Aqua Optima is 260 cm, which partly explains its low weight of 13 kg. It is characterized by a simplified design with a minimum number of seams, which reduce the likelihood of damage to the product. The board can take on a maximum of 220 kg. The characteristics of this model are not the best, but, as for the budget, they are quite acceptable.

Going on a long voyage, you need to buy a good air mattress in advance.

The best motor-rowing boats made of PVC

Such options are relevant for those who are planning long-term rafting on large rivers or lakes. These boats can be steered with oars, or they can be motorized with a transom. But they all require registration with the Ministry of Emergency Situations.

Admiral 280T

In this rating, this model is the golden mean between economical and expensive. According to the reviews of the owners, it is quite comfortable, instead of hard seats, soft barrels are built in on the sides, and an optimal distance is made between them. The watercraft is suitable for two people, but can withstand a maximum of 210 kg. On the one hand, the non-inflatable bottom makes swimming safer, but on the other hand, it complicates the assembly of the product, just like a collapsible floorboard.

This model does not boast large sizes, its length does not exceed 280 cm. Engine power indicators of 3.5 hp. also not the most impressive, but, in general, that is why it was included in the rating of the best rowing motor boats. The manufacturer added paddles to the set, for which special holders are provided. The raised stem allows you to quickly develop speed and enhances the resistance of the "vessel" to the water.

Advantages:

Walking;
Good side diameter
Overpriced feed;
Good fittings;
Excellent pump pump;
Light.

Flaws:

Oarlocks creak, lubrication is needed;
Valve springs rust quickly, the product must be thoroughly dried;
Poor water protection.

According to user reviews, the Admiral 280T is very convenient for fishermen who want to fish standing up.

Riviera 3200

This transom boat is manufactured by the Boat Master factory, which is quite famous in this market. It is characterized by increased stability on the water due to the built-in transom and dense inflatable keel. Its sides have optimal rigidity and height, which, in particular, made it possible to fix comfortable mobile seats for two people on them with a comfortable distance. The watercraft is really roomy, because its length is 3.2 m, while it can safely take up to 500 kg of cargo.

Obviously, the Riviera 3200 model is designed, if not for professional, then certainly for frequent use. Being designed for a motor with a power of up to 15 hp, it easily moves along reservoirs, rivers, lakes. But fishermen may have some difficulties, since there is no holder for fishing rods. A collapsible plywood flooring allows you to feel more comfortable on the “deck”, but at the same time increases the time for assembling the boat.

Advantages:

Easy floor assembly;
Quality materials;
No bad smell;
Sufficiently dense walls;
Beautiful colour;
Reliable seams;
Cylinder diameter;
cockpit width.

Flaws:

Asymmetrical gluing;
Lack of fabric reinforcement under the stringers;
Unreliable fastening of the valve cover of the front cylinder;
There is a backlash at the place where the pipes are joined;
The tapes covering the backlashes often move away.

Special attention It is worth paying attention to the complete set: the set includes a pump, oars, and a handrail cable.

This is another pretty good rowing model designed to install a motor, but a powerful one, of course, will not work here, up to a maximum of 2.5 hp. And again here, like other models from this ranking of the best PVC boats, the bottom is not inflatable. But if necessary, you can use the removable option that comes with the kit. It is not the most spacious, its width is 1.28 m, and the length is 280 cm, but due to the expansion of the stern there is where to store fishing tackle.

Like most inflatable two-seat watercraft of this format, the balloon is divided into 2 parts. Thanks to this, in the event of a violation of the integrity of the walls of a PVC product with the help of oars, it will be possible to continue to control it, while remaining afloat. Everything would be just fine if it were not for the weight of 16 kg, although for two people, which is how much the boat is designed for, this will not be a particular problem.

Advantages:

Spacious;
Durability of polyvinyl chloride fabric;
Compact when assembled
Easy to transport;
Reliable valves;
Holds air very well.

Flaws:

The pump is weak;
Unreliable fixation of the transom;
Not very good seats, they fall out if the boat is not pumped up.

Judging by the reviews of the Frigate M-3, it is obvious that the manufacturer was playing it safe when he indicated a maximum weight limit of 220 kg, in fact it is somewhat larger.

Which PVC boat is better to buy

If there are 2-3 people in one watercraft, then it is desirable that its length be at least 3 m. The barrels should be located at a sufficient distance so as not to touch the neighbor's oars. By the way, during a long voyage it will be very uncomfortable to sit on plastic and wooden seats. Those who are going to fish standing in it, it is better to give preference to options with a solid bottom.

When choosing a specific model from this TOP of the best PVC boats, you need to consider the following:

For those who go fishing rarely and for a short time, for example, on a calm and small river, you can buy inexpensive rowing models - Pilot C-200 or Aqua Optima 260.
Those wishing to go rafting for several days will find it difficult to control the oars all the time. In this case, the product must be provided with a transom for installing the motor. Then it will not be a mistake to choose a pretty good option Frigate M-3.
If 3 people plan to swim in a boat at once, and also for its professional use, for example, by rescuers, the Riviera 3200 will be relevant.
Those who are going to fish or swim in rivers or lakes with big amount thickets, it is worth taking a closer look at the Admiral 280T model, which overcomes them perfectly.

Buy the very best boat pvc it will turn out only when there is confidence in its stability, strength, practicality and safety. We primarily focused on these indicators when compiling this rating, we hope it will help you choose the right model for you.

The PVC boat for fishing can be used for different purposes, whether it is recreation on the lake or sports rafting on the river. But most often it is used for fishing. They gradually ousted their "rubber competitors". The key to this was a lower price, availability, compactness and, above all, versatility. In addition, their choice is very large in various ways. Therefore, let's try to figure out how to choose a PVC boat for fishing.

How to choose a PVC boat for fishing

Before choosing a purchase, you should decide on the purpose and conditions of use. You can select such criteria to make it easier to decide which is the best boat for fishing:

capacity;
convenience;
practicality;
safety;
material of manufacture;
boat color.

Let's consider each separately. The capacity of the boat matters even if the angler is going to fish alone. There are single PVC fishing boats (up to 2.5 meters), double boats (2.6 - 3.9 meters), triple boats (3.9 - 4.3 meters) and quadruple boats (more than 4.3 meters). If the product is intended for family holidays, then you can take a small model. Still, for fishing, it is better to take a more spacious one, because you will have to take a lot of gear with you into the boat. And for more serious destinations, it is better to take a boat for 4 people.

The bottom of the boats is the spirit of the species: inflatable and rigid. Inflatable is convenient for walking on water. Such a boat is easier to transport, assemble, it is easier to manage. But the hard bottom is distinguished by good driving performance, especially when using a motor. Also in a boat with a hard bottom, you can stand upright.

In the process of finding the best bite, you have to move and fix the boat in the exact position. To do this, you will need an anchor, so it is better to choose a purchase with an anchor eye. You should choose those models where there is additional protection at the point of contact of the anchor rope with the bow.

An important factor when choosing is the possibility of rearranging the seats. With fixed seats there will be inconvenience. When fishing together, the legs of a neighbor can interfere, and when rowing, the oars can rest against the knees of a partner. Therefore, the seats must move freely depending on the situation.

An important factor when choosing is the possibility of rearranging the seats

If the plans include installing a motor, then you should choose models with a good transom. A thickness of 25 mm or more is desirable, at which it can withstand a powerful unit. To protect the transom from interactions with the motor, it is reinforced with additional overlays. It is also not recommended to buy models in which it is attached to cylinders using pieces of PVC. Due to vibration, this design is not reliable.

When choosing row boat the symmetry and reliability of the seams should be checked. They are made in two ways: welding and glued. With the welding type, a special temperature regime is used, so it is necessary to check that the material is not melted. And when glued - so that there are no glue streaks. IN motor boats, unlike rowing, more sealed compartments. Also, in their production, a denser material is used. Therefore, they are better and more durable.

Multi-seat products usually consist of 3 sections. Particular attention should be paid to the dimensions of the sides. When narrow, water can overflow into the middle, and large wide sides sail and strongly resist water. Therefore, it is necessary to choose medium sizes. There are such forms of boards:

closed ovals designed for small ponds. It is impossible to install a motor on them (in rare cases - low-power);
U-shaped, designed for sailing long distances and with impaired weather conditions. They are divided into several compartments and often have a powerful motor.

In good boats, the nose is slightly turned up, which prevents the water from overflowing when moving and dampens the wave. A girth is sometimes stretched around the side, which is used to fix fishing gear.

Valves play an important role. There are automatic valves that independently equalize the pressure inside the cylinder, and manual ones. There are also water release valves. They are located at the back of the boat and near the transom. Using them, you can pump out the water that has fallen right on the go.

But the choice of a PVC boat for fishing, perhaps, should begin with a study of the characteristics of the material of manufacture. There are two types: Hypalon and PVC. Hypalon products are used by fishermen and hunters, this material makes them lighter and more resistant to ultraviolet radiation. But PVC boats are inferior to them in this, but they are more durable.

Usually 3 to 5 layers of reinforced PVC are used and even higher. The more layers, the heavier the product itself. There is approximately the following density ratio:

rowing - 700-750 g / sq. m;
combined -<950 г/м. кв;
motor -<1050 г/м. кв.

For reference. If you equip the vessel with a density of 750 g/m. sq. motor, it will lose stability. As a result, security will be reduced.

When choosing, you should also follow the color of the future purchase. It would seem that there would be a PVC boat for fishing, but it does not matter which color to choose. But this is not so, each color has its own advantages. On products of dark or protective colors, dirt is not so clearly visible, and they are not so easily soiled. And since very often you have to drag the boat along the coast with sandy soil or fish in marshy places, this is an important factor. But the light color of the boat is not so attracted to ultraviolet, so it does not heat up so much on a hot day. In addition, it is not so noticeable to the inhabitants of the underwater world. Camouflage is better for hunters. Their coloring helps to disguise themselves in reeds or grass, which will allow prey to approach unnoticed.

Camouflage boats are better for hunters. Their coloring helps to disguise themselves in reeds or grass, which will allow prey to approach unnoticed.

Having decided which characteristics the best PVC boat for fishing is suitable for a particular case, you should start choosing a model. The cost of boats is rather big, so the choice must be approached, having considered all the nuances. It would not be superfluous to ask the seller for a quality certificate for the product, the availability of all components and the conformity of the appearance to the characteristics.

PVC Boat Ratings

The rating of inflatable boats for fishing below will help you make the right choice. There are rowing, motor and motor-rowing boats. Each type has its own leaders in the PVC boat production market, differing in price and quality characteristics. Let's take a look at each separately.

Rowing boats

"HUNTERBOAT Hunter 280"

Declared as a rowing boat, but you can install a small low-power motor. Suitable for both family vacations and fishing. Due to its design features, it allows it to stand at full height. For the convenience of fishermen and hunters, it has an enlarged stern. It can accommodate, for example, a large backpack. The balloon is significantly enlarged (up to 40 cm), but the speed of deflating and inflating is only 15 minutes. An interesting solution was the placement of eye rings on both sides, allowing you to install the anchor on the stern and on the bow. Its weight is 15 kg. Also included as a bonus is a carry bag.

It has the following characteristics: its length and width are 3 × 1.5 m, and its capacity is up to 250 kg. For stability, it has a plywood floorboard, which takes up little space. The oars are made of aluminum, collapsible. Cylinders from damage on hard surfaces protects the bar. A rope is stretched around the sides. The boat has several modifications, but the base one, Hunter 280, is the most common. In addition, it is small in size. Its approximate cost is 15,000 rubles.

HUNTERBOAT Hunter 280

"Intex Excursion-4 Set" (68324)

It is made of a two-layer material, a polyester mesh is stretched between the layers. This four-seater boat is equipped with oars, a pump and a backpack for transportation. There is an additional inflatable floor and space for a transom, there are also 3 cylinders and 2 valves for quick inflation / deflation, plus 1 regular valve. The rope runs around the entire perimeter. An interesting nuance is a pocket in the compartment for things.

The dimensions of the boat are 316×166×44 cm, the PVC thickness is 0.76 mm, and the weight is 23 kg. Included is a backpack for transportation. The material of the boat is immune to ultraviolet light, salt water and temperature differences. Its design is very convenient for different needs. Its approximate cost is 10,500 rubles.

"Intex Seahawk-200"

This is already an example of contrasts. It is suitable for extreme and tourist sports, as well as for a quiet holiday. The material of the boat is high-strength reinforced vinyl, which can withstand neither the sun, nor salt water, nor even mechanical damage.

This is a double boat with a capacity of up to 200 kg. The balloon system consists of 3 valves and 1 additional. Its dimensions are 237 cm, width - 114 cm, and the diameter of the cylinders - 41 cm. The thickness of the reinforced mesh is 0.6 mm.

It is completed with a handrail, oarlocks for oars, transport handles, etc. But at the same time, oars and a pump are not included in the kit. Its approximate cost is 4500 rubles.

Motor boats

HDX 300

This option has absorbed the best qualities of inflatable boats - minimal weight and material that retains its qualities for a long time. It is very stable, which allows you to fish at full height. Its approximate cost is 45,000 rubles.

"HUNTERBOAT Hunter 320"

Designed to comfortably accommodate 3 people. Has all the accessories. It is suitable for a motor up to 9 liters. With. Its approximate cost is 20,000 rubles.

Solar 380

A good choice, suitable for extreme recreation. It can already be equipped with an engine up to 20 hp. With. Its approximate cost is 75,000 rubles.

Flinc 320

This specimen is suitable for various needs at temperatures from -40 to + 50 ° C. The seams are glued in a special three-layer way and guarantee safety for 5 years. 8 mm plywood is laid on the bottom, not afraid of water. The transom is also made of plywood, but reinforced with metal protection.

It has the same equipment as the above boats. But it comes with a repair kit, oars and a pump. Its approximate cost is 22,000 rubles.

Motor-rowing boats

«Intex Challenger-3″

This product is made of three-layer high-quality PVC - reinforced polyester is located between two vinyls (0.6 mm). It also consists of three unconnected compartments. And all this guarantees proper quality.

Its characteristics are as follows. Size: length - 295 cm, width - 137 cm, and height - 45 cm. Its weight is 13 kg, its capacity is up to 350 kg. The paddles are made of aluminum and the blades are made of plastic. Its approximate cost is 7000 rubles.

"Bestway Marine Pro-1"

Triple boat of large dimensions, made of three-layer reinforced PVC (0.66 mm) and microwave welded without glue. Its dimensions are: 207×150×50cm and weighs 14 kg. The floor is multi-chamber and very dense.

In addition to classic mounts, it has parts for fixing the motor. In addition, it comes with comfortable pillows. True, the motor can be set with a power of no more than 1.5 liters. With. The material is hardy, does not rot, resistant to oils and gasoline. And most importantly, does not require special care. Its approximate cost is 9000 rubles.

Bestway Marine Pro-1

"Aqua 260"

Ideal for a fisherman or hunter who is going to use it on small waters or near the coast. Its design is simpler, but it has fewer seams, as well as a non-inflatable bottom.

Its dimensions: 260 × 130 × 35 cm, the diameter of the cylinders is 36 cm. Its weight is 13 kg, with a carrying capacity for 2 people - 220 kg. Complete with hard seat, pump and oars. Its approximate cost is 10,000 rubles.

Finally, I would like to say that affordable and simple boats cost 7,000-30,000 rubles, but the best boats for fishing are more expensive. The choice, as it turned out earlier, is quite large and everyone will find something of their own. A boat is a purchase that is rarely made. Therefore, this should be approached slowly, consult with fellow hobbyists or consultants in the store. No tail, no scales!

PVC inflatable boats can be used in a variety of ways. Starting from fishing and hunting, ending with pleasant walks along the river, lake or other body of water. This rating includes the best PVC boats. We will talk about their strengths and weaknesses, as well as current prices.

What do you need to know before buying?

Before making a purchase, analyze the information about the selected model. Most of them are controlled by oars and brute human power. Not every boat can fit a motor. If this happens, then you will need to register the boat and motor without fail.

An important factor is the size of the person or group of people who will be on board. On average, most boats can easily carry the weight of one fisherman, up to 100 kilograms, as well as all the necessary equipment.

Considering all the pros and cons of the models on the market, we have compiled such a list, which includes the best boats according to the 2018 version:

1. STREAM Dolphin-M

The model is an inflatable rowboat. It embodies all the latest developments in recent years. High-strength PVC is used, which guarantees safety and ease of use. Thanks to its unusual shape with a raised nose, it can easily carry waves up to half a meter high.

Advantages:

The bottom is hard, moisture-resistant plywood was used in its manufacture.
High strength PVC.
Unusual design in the form of a raised nose and high sides.

Flaws:

The boat is quite heavy.
It will be too cramped for two fishermen. Ideally, use it for sole use.

2. Hunter 280 R

The German-made boat is made of high quality PVC fabric. The O-shape gives the best nautical characteristics, allows you to fit several people and fishing tackle inside. The high side will protect against high waves that reach 0.7 meters. At the same time, two anglers with full equipment can be on the boat.

Advantages:

Good handling and maneuverability.
A very easy move.
Excellent build quality.
There will be no difficulties with the assembly and disassembly of the boat.
For all its dimensions, it does not have a large specific gravity.

Flaws:

The kit comes with a very weak pump.
For more comfortable use, you will have to buy an additional slant to the bottom. What is available is not enough.
Although it is stated that two can be on the boat, they can be crowded.

3. Pilot Profi S-280-M

This boat attracts fishing enthusiasts with great attention to safety, ease of operation, maneuverability and simply excellent performance. For the bottom, a denser PVC fabric is used, making it comfortable to use. This is a cheap option that guarantees an excellent quality product.

Advantages:

The design protects against waves up to half a meter high. This is ensured by the sides and raised nose.
The position of the seats in the boat can be adjusted.
The boat does not have a large specific gravity with an overall design.

Flaws:

The bottom is of a tension type, so you can only fish while sitting.

4. Taimen N - 270 C

The model belongs to the rowing type and is designed for two fishermen. There is a special plywood on the bottom, which makes the bottom tight, allowing you to fish in a standing position. Also here you will find mobile seats, which also provide additional comfort. The total weight that the boat can carry barely exceeds two hundred kilograms.

Advantages:

The bottom is rigid, which is achieved thanks to the slip-book and waterproof plywood.
Use of PVC reinforced type.
Design features will protect from waves up to half a meter.

Flaws:

Large specific whole of the boat due to the hard bottom.

5. Leader Compact 265

The boat is made of reinforced PVC. Ideal for lovers of hunting, fishing and outdoor activities. However, the manufacturer does not recommend using it in strong winds. The bottom is rigid and consists of two layers: waterproof plywood and anti-slip coating.

Advantages:

In tandem with a boat, you can use a motor up to 3.5 hp.
The presence of a hard bottom.
The main material is reinforced PVC.
The boat has a small specific gravity.
Convenient system of fastening of cans.

Flaws:

Low sides do not allow you to safely be in the water with waves above 0.1 meters.
The boat is very small, so it will be cramped for an obese person in it.
You can not swim on it in windy weather.

6. Pilot M-330

This boat is a motor boat. Its main feature is that a person can use a low power engine and gradually increase it. There is no need to buy a new boat every time. It is also a big plus that the keel and cylinders are protected from abrasion by PVC. This model cannot be called inexpensive, but in practice it will pay back every ruble that the fisherman pays for it.

Advantages:

Reinforced PVC fabric is laid out in five layers.
Cylinders are reinforced at the place of installation of stringers.
The transom can be fixed using a plastic holder.
The kit includes a safety loop for the motor.
There are seats that can be changed.
A bar is installed along the perimeter of the boat with a wave breaker.
PVC has additional reinforcement from the side of the keel and tapes on the bottom of the cylinders.
The warranty service of the boat is 2 years.
Small specific weight with the dimensions of the boat.
A wide variety of colors are on sale.

Flaws:

Very small boat capacity.

7. Aqua 3200 SC

Such a boat belongs to the motor-rowing type, that is, the fisherman can use both the motor and the oars. In its class, this particular model is considered the lightest in weight. Fishermen like it because there will be no problems with transporting the boat. Payol is assembled from individual elements made of aluminum.

Advantages:

Low specific gravity for boats of this type.
The transom is attached to a special belt.
The keel of the boat is protected by PVC timber.
Very dense reinforced PVC fabric.
Along the perimeter of the boat, a correct bar is installed, equipped with wave breakers.
It is possible to change the position of the seats.

Flaws:

Low load capacity.

8. Hunter 335

The model belongs to the motor-rowing type of boats. It is popular among fishermen due to its small size and excellent operational capabilities. Please note that during production the model was additionally strengthened. This was done using an aluminum profile at the junction of PVC fabric.

Advantages:

Using high density PVC fabric.
Additional reinforcement in the area of the keel, floor, fender and joints included in the basic package.
Roomy enough for its size.
It is possible to move the seats.
Decent payload.
The warranty period for the maintenance of the boat is five years.

Flaws:

Large dimensions and specific weight of the boat.
You will have to pay extra for strengthening the cylinders.

9. Cayman N-330

This boat can be attributed to the list of elite and legendary in Russia. The hefty price tag puts it out of the reach of the average fisherman and also indicates that it is the best quality option if you are not afraid to overpay. In its design, the main methods for creating motor boats were used. Thanks to this, it is stable on the water and quickly develops the desired speed. Hunters and fishermen unanimously affirm its high quality and long service life.

Advantages:

Excellent maneuverability.
Good running qualities.
Holds up well on the water, even in windy conditions.
A fender is installed around the perimeter of the entire boat.
Two seats can be attached to the cylinders for more comfortable fishing.

Flaws:

When assembled, the boat has very large dimensions and weight.
The density of PVC materials is inferior to cheaper analogues.

10. Apache 3300 SC

This motoranya boat has an unusual balloon structure. Its 28 cm diameter helps to provide the best driving performance, maneuverability and comfort for the fisherman or hunter. Please note that if you compare the diameter of the cylinder with boats of this class, then it will be the largest. Thanks to this, the fisherman does not have to worry about the fact that he sets off in bad weather, and the peace of the water surface is disturbed by waves and strong winds. Another advantage is that due to the large cylinders, a person feels comfortable in the boat. Even moving at a serious speed, there is no feeling that you are about to fall out of the boat.

Advantages:

The cylinder diameter is much larger than other boats.
Very dense reinforced fabric, as the main material of the boat.
Along the perimeter of the cylinders, wave breakers and correct beams are installed, which will prevent the boat from turning over on the waves.
In the area of the keel, PVC fabric has additional reinforced protection.
It is comfortable to stay in the boat even for a long time, thanks to its excellent performance and great attention to human safety.

Flaws:

There are no complaints about the technical side of the boat. However, numerous reviews often mention the problem of factory marriage. Of course, all this can be solved under warranty and the boat can be replaced, but getting a low-quality thing for decent money can ruin your mood or even lead to a fishing emergency that is dangerous to human life.

When choosing a boat for fishing or hunting, pay attention to its dimensions and weight, because if you do not have personal transport, then carrying it to the reservoir can be quite difficult.

There are no related articles.

Sooner or later, almost every angler comes to the conclusion that fishing from the shore is good, but it is still better from a boat. And most often for such purposes they choose from polyvinyl chloride, which is not surprising, because there is simply no alternative - rubberized fabric loses to PVC in almost all respects, and boats with a rigid hull, no matter wooden or fiberglass, are too problematic to transport to the reservoir.

Advantages and disadvantages of PVC boats

From the very moment the boats made of PVC appeared on the market, the previous generation, which was made of rubberized fabric, was pushed into the background, and it is no coincidence.

The advantages of PVC boats are as follows:

Floats made of PVC are much stronger, have greater elasticity and are less susceptible to chemically aggressive environments.
A long stay in the water also does not harm PVC, and due to the greater strength, it is possible to install motors on such boats.
Such a swimming facility does not require any special storage conditions, there are no problems with transportation either - smaller models can fit in a travel bag, and those that are larger are packed in the trunk.
Having a very low draft, such boats behave perfectly in shallow water, and in case of insurmountable water obstacles, the light weight allows you to simply drag the boat to the right place or move it over the obstacle in your hands.

The only downside:

Polyvinyl chloride, albeit very slowly, but still decomposes under the influence of ultraviolet radiation.

Varieties

Boat with inflatable keel

Depending on the design features, the following varieties can be distinguished:

Small PVC boats that do not have a hard bottom. The bottom is represented either by a layer of polyvinyl chloride, or inflatable. The advantage of such boats lies in their small dimensions when folded and their low weight, which allows you to take the boat with you, even getting to the fishing spot by bus or on foot.
Boats with slate bottom. There are two types of boats with a hard bottom - with a removable and non-removable bottom. Such boats are somewhat more stable and are available with a full transom, which allows you to install outboard motors up to 5 hp.
Boats with an inflatable keel. The advantage of such boats lies in the greatest stability among inflatable boats, both when cornering and in strong waves. Also, such boats have a greater carrying capacity.

Classification

Rowing boats- this species is most common, as it has small dimensions, low price, and does not require registration with the GIMS of the Ministry of Emergencies, since their displacement is less than 255 kg. Suitable only for relatively small lakes or rivers. In length, such boats are usually from 2.3 to 3.1 m.
Motor-rowing boats- have a U-shaped cylinder, which, as a rule, is divided into several sealed compartments. Such boats must be registered with the GIMS of the Ministry of Emergency Situations. Length - from 3 to 3.8 meters. Suitable for use on larger water bodies.
Motor boats longer than 4 meters, cylinders contain up to eight sealed compartments, and the power of installed engines can reach up to 50 hp. with., which allows you to successfully compete with swimming facilities with a rigid hull. Can be successfully and safely used on large reservoirs. Registration in GIMS of the Ministry of Emergency Situations is obligatory.

Rating

Zodiac

The legendary French company was founded in 1934. It was the boats produced by this company that the most famous explorer of the world's oceans, Jacques Yves Cousteau, preferred. High reliability of Zodiac products is provided by a unique five-layer material of German production, as well as welded, and not glued, as in most manufacturers, seams.

An illustrative example is the Zodiac Cadet 240 airlite model, which is a three-seater inflatable boat with an inflatable bottom and keel, with a carrying capacity of up to 290 kg, while the weight of the boat itself is 27 kg. The cost of such a boat is about 103,000 rubles.

Price - 103,000 rubles.

Honda, or more specifically, its powerboat subsidiary, HONWAVE

The main distinguishing feature of most of the boats produced by this company is the use of aluminum for the manufacture of the bottom, which provides a large carrying capacity. HONWAVE T30 AE2 - the boat itself weighs 54 kg, load capacity - 610 kg and has a three-chamber layout of cylinders. The cost is approximately 79,000 rubles.

Price - 79,000 rubles.

Quicksilver

The company is considered one of the leaders in the middle class price segment. The boats are assembled from high-quality American-made material, which ensures long-term use without additional care for the seams.

An excellent example of the company's products is the Quicksilver AirDeck 310 EA, a motor boat designed for 6 people, its maximum load capacity is 635 kg. The cost is from 47,000 rubles.

Price - 47,000 rubles.

Yamaran

The motorboat business is controlled by Yamaha. The boats are distinguished by a five-layer structure of the hull fabric and a well-thought-out design. Yamaran Tender 330, with a weight of 60 kg, has a carrying capacity of up to 480 kg, the price is from 48,000 rubles.

Price - 48,000 rubles.

HDX

HDX boats are the best solution for those who want a quality product but are not ready to pay too much. The HDX Oxygen 300AL boat has a load capacity of up to 510 kg and can be equipped with an engine up to 10 hp. The cost is from 45,000 rubles.

Price - 45,000 rubles.

How to choose a PVC boat

First of all, you need to focus on the size of the reservoirs on which it will be applied. It makes no sense to buy a watercraft with a carrying capacity of more than 600 kg for small lakes or rivers, just as a small one is not suitable for going out to sea.

Price is also an important selection criterion. Those who cannot afford the products of well-known brands can opt for cheaper options - Bark, Brig, Hummingbird and the popular more expensive high-quality brand Flinc.