The main advantage that an inflatable boat has is high mobility. Thanks to this, it is very convenient to assemble and disassemble, transport from place to place and store. It is important to immediately decide on the preferred way of catching fish. The article discusses the main questions that may arise from a fisherman who wants to choose the right inflatable boat.

The first thing to consider when choosing a PVC boat is its size. The length of the boat should not be more than 4 meters, otherwise such an important property as mobility will be lost. In this case, it will become difficult to quickly disassemble and assemble the boat, transport it in a car with a small trunk, transfer it from one place to another, and also store it in the house. The article will discuss how to choose the right inflatable boat, which is convenient for fishing with spinning, using the “track” and “cast” methods. By catching "on the track" we mean fishing under the motor, without the use of "downriggers" and "gliders". This is the easiest way fishing, which is used by ninety percent of recreational anglers.

Properties necessary for an inflatable boat when fishing with spinning
During fishing with spinning, wobblers, spinners and other baits, as well as sharp triple hooks are used. These baits are thrown into the water, and the fish caught with them are pulled out. Thus, during fishing in the boat there will be a considerable amount of wet and sharp objects. From these prerequisites, you need to start choosing an inflatable boat. Obviously, the future boat needs a hard bottom (payol), which cannot be pierced by a tee or a fish fin. In addition, water should go under the payol, which can leak from gear or spill from above in the form of rain. Also, the bottom must withstand a fisherman who will stand in a boat with a full-length spinning rod.

Which payol is better - plywood or metal?
It is best to choose an inflatable boat with a solid rigid floorboard. Payol can be made of two different types materials: waterproof plywood or metal. They weigh almost the same, but the plywood payol has a number of advantages: it does not rattle during movement and the feet do not freeze on it. In addition, repairing a boat with a plywood floorboard is much easier and faster than with a metal one, which is especially important in a limited fishing season.

What are the types and sizes of inflatable boats suitable for spinning fishing?
There are two types of inflatable boats: punt and keelboat. Experienced anglers often prefer keel boats, as they handle much better than punts.
There are three inflatable boats standard sizes(plus or minus 5%):
1) Boats with a length of 3 m can be equipped with a motor with a power of up to 5 hp.
2) Boats with a length of 3.5 m, used with an outboard motor up to 15 hp.
3) Boats with a length of 4 m, for which the recommended outboard motor power is 15-20 hp.
Such combinations of types of boats and motors are the most optimal and have been repeatedly tested by fishermen of all stripes.

Key features to consider when choosing inflatable boat
The following questions come up most frequently:
- How can a beginner independently determine the quality of an inflatable boat?
- What are the main parameters to choose an inflatable boat?
- Does the inflatable boat require tuning?

A simple visual inspection is often enough to determine the important characteristics of an inflatable boat. For example, smooth contours are a sign of modernity and quality of the boat, and “chopped”, on the contrary, is the last century.
Boats are also distinguished by the appearance of the upper edge of the transom board. Two options are common. The first, when the upper edge of the transom board is covered with a profile (strip), and the second, when a cut from sawing is simply left there. A transom made of good waterproof plywood does not need to be covered with a profile. If the profile is attached with screws, then this may indicate that it is glued incorrectly and should alert the buyer.
It is worth carefully inspecting the tape that runs along the contour of the boat (flying "spray bar"). Its quality can be determined using an ordinary clothespin: if you can attach it to the tape from below, then everything is in order, if not, then the manufacturer cheated.
The color of the seats and floorboards is also important. If they are made of waterproof plywood, then you need to remember that it is only made in brown and gray, but in no case green.

Now consider separately each size of inflatable boats.
3 meter inflatable boat
It should be borne in mind that boats of this length are only suitable for day fishing, as they have a very small capacity. The main criterion for choosing such a boat is its weight. It should be no more than 35 kg. The most convenient type of payola for a boat of this size is a “book” without stringers. In this case, the boat can be safely lowered into the water together and raised back. Tuning such a craft is not required. If the boat is of high quality, then the ends of the cylinders will be reinforced with special tapes (about 50 cm). Often these boats come in a single package.
For convenience, it is worth getting a separate bag for payols, so it will be much easier to transport the boat.

3.5 meter inflatable boat
For this size of boats, tuning is needed: the installation of special boat chassis. With their help, it is easier to lower the boat into the water on your own. You can also install a nose visor that will protect against splashes. There is no special need to strengthen the bottom, this can be saved.

4 meter inflatable boat
Such an inflatable boat can survive a three to four day trip. To do this, the boat needs to be thoroughly tuned: install a bow visor, boat chassis and strengthen the transom. It is better to fix the benches with a handrail so that they are not torn off during strong pitching. But the awning is not very convenient - it makes it difficult to see.
However, it is still better to choose compact equipment for fishing from such a boat, since there is less space in such a boat than it seems at first glance.
We advise you to have a separate bag for stringers, cans, oars, so that it is easier to load the boat into the car and carry it to the assembly site.

Light enough to transport and compact, which is highly appreciated by tourists. At the same time, they are stable on water and absolutely safe to use. PVC or Hypalon (artificial rubber) is usually used for manufacturing.

The hipalon fishing boat is lined with two layers of neoprene on the inside, and a layer of fabric is laid between them for strength. Artificial rubber is a very durable material, resistant to environmental influences, with good waterproofing properties. Therefore, the hipalon fishing boat is a good choice for those who like to walk on the river, night fishing and travel.

PVC swimming aids are also lightweight and durable, easy to transport and will last you a long time. But at the same time they have their drawbacks, for example, the difficulty in repairing.

How to determine the quality of an inflatable boat?

Parts of the Hypalon structure are usually connected with glue, the composition of which is close to the composition of the material of the boat - the seams formed as a result of such gluing are sometimes even stronger than the boat itself, they are airtight and do not wear out over time.

Bonding hipalon tubes is a long and laborious process, which is why such a fishing boat is not cheap. But in this case the price fully corresponds to the quality. Hipalon is used for the production of boats Achilles and Arancia.

If you choose PVC fishing boat, please pay attention to Special attention on the method of joining parts, since this material is difficult to glue. PVC seams are obtained by gluing with an overlap or butt, duplicated with overlays inside and out for greater strength. Also, vulcanization or welding is used to connect the parts of the arch. Welding is a fairly reliable method, but it is difficult to apply outside the factory.

A PVC fishing boat can have a seam tape - it performs not only a decorative function, but also strengthens the seam.

Which boat to choose

If you plan to use the boat often for fishing alone or with one passenger, choose a compact PVC rowboat. Such products are presented in abundance by the firms "Fregat", "Poseidon", Kolibri, Marko Boats.

Also, inflatable boats for motors can be the best option for fishing enthusiasts - they are safe and stable, they will allow you to quickly move through the water without spending too much fuel (small engines of less power are installed on an inflatable raft than for a boat). good performance motor inflatable boats of the BARK, NORDIC, "Neptune" brands.

A more bulky option is a boat for fishing, which combines the lightness of inflatable boats, but at the same time has a rigid false bottom and a keel to which inflatable parts of the structure are attached.

A powerful motor can be attached to the rigid keel of the RIB boat. Such boats are transported in a trailer, so they cannot be called compact and easy to transport. RIB-boat can be equipped with jet equipment, shower cabin and fuel tank. Such products are produced by GLADIATOR, Aquarius, "Impulse", as well as "Neptune" and "Mnev and K".

An inflatable raft with a removable deck is suitable for family vacations or traveling in a large company, but it cannot be used for serious work due to the soft floor, which easily sags. This boat can be pulled ashore by yourself without the help of friends, it is easy to assemble, transport and store.

PVC boats are very popular with fishermen and hobbyists. active rest Outdoors. They are convenient to use and transport. PVC boats are great for fishing on rivers and small ponds. Having compactly packed into a bag-backpack, such a boat can be comfortably carried on the shoulders.

The PVC material used to make boats is puncture resistant, durable and abrasion resistant. Another advantage of PVC boats is their low cost.

Price 115 thousand rubles

Opens the rating of the best quality PVC boats. Total weight boats are significantly reduced due to the inflatable floorboard. Since there are no rigid elements in the design of the model, it is quickly brought into working condition with a pump. The high pressure in the floor at the same time provides the vessel with the necessary rigidity. The model can accommodate three passengers. The disadvantages of the boat are a low-power motor (4 hp) and a high price.

The estimated cost of the model is 115 thousand rubles.

Price 40 thousand rubles

The model has a U-shaped sides with conical ends. According to the manufacturer, the boat can be equipped with a motor up to 8 liters. With.

The carrying capacity of the model allows you to take three passengers on board, but only two can get comfortable on the boat. Banks are used as seats. The floor of the boat is made of hard plywood.

Yamaran T28o is a worthy choice for a well-equipped vessel.

The estimated price of the model is 40 thousand rubles.

Price from 35 thousand rubles

- in 8th place in the ranking of the best PVC boats in terms of quality. This model is positioned as a serious vessel. Large cylinders allow it to pass through high waves, and the skid plates provide excellent gliding of the boat. At the same time, the boat is lightweight and compact. Carrying capacity - 3 passengers. The boat can be equipped with a motor with a power of up to 10 hp. With. The model is designed for swimming both in small reservoirs and on large rivers.

The average price of the model is from 35 thousand rubles.

Price from 54 thousand rubles

On the 7th place in the ranking of the best quality PVC boats is located. Fans of fishing and hunting will be interested in the excellent seaworthiness, spacious cockpit and large carrying capacity of the Favorit. The carrying capacity of the boat is 6 passengers. The power of the installed motor is up to 35 hp. With. The boat is stored and transported in two packs-backpacks.

The approximate cost of the model is from 54 thousand rubles.

Price 29 thousand rubles

On the 6th place in the ranking of the best quality PVC boats is Admiral 320 classical. The model was created for hunters, fishermen and outdoor enthusiasts. Advantages of the boat: fast speed, good directional stability and good maneuverability. The model is made of high-strength PVC fabric, resistant to external environmental factors. The bottom is reinforced with a prefabricated profiled floor. The boat is designed for 4 passengers.

The estimated price of the model is 29 thousand rubles.

Price from 55 thousand rubles

Continues the rating of the best PVC boats. The model is designed for two passengers. Equipped with an inflatable bottom, which gives the vessel the necessary deadrise. Additional PVC layer reinforces lower part cylinders and bottom. The deck is lined with anti-slip material. The maximum motor power is up to 15 hp. With. At the same time, the ship can reach speeds of up to 37 km / h.

The average price of the model is from 55 thousand rubles.

Price 25 thousand rubles

Smart 310LE is a compact and mobile boat. Thanks to smooth contours and a flat bottom in the transom area, the boat is able to bring an increased load into planing mode. Course stability and excellent seaworthiness are provided by the installed keelson. good move the boat also shows when rowing with oars. The spacious cockpit allows you to comfortably fish in Smart together.

Motor power 5-6 Horse power allows you to reach speeds up to 30 km / h (depending on the load of the boat).

The approximate price of the model is 25 thousand rubles.

Price 17 thousand rubles

The third place in the ranking of the best PVC boats in terms of quality in 2016 is occupied. The model has good seaworthiness, light weight, compact packaging and easy sailing under oars. The material of the model is heavy-duty PVC fabric. The boat is designed for fishing, hunting and outdoor activities on the water. Capacity -3 passengers.

Advantages of the Hunter 320:

• good seaworthiness and excellent handling;
• a strong floor made of waterproof plywood;
• mobility and light weight;
• the possibility of gliding under a low-power motor;
• spacious cockpit;

The average price of a boat is 17 thousand rubles.

Price 15 thousand rubles

Takes 2nd place in the ranking of the best quality PVC boats in 2016. The model belongs to transom motor boats. Keel-fins mounted on the bottom of the cylinders give the boat directional stability. Maximum motor power - up to 5 hp. The boat is equipped with a hard floor made of moisture-resistant plywood coated with an anti-slip compound. The lyktros-lykpaz system allows you to move the seats along the entire length of the boat.

FLINC FT290L is a spacious and light boat made of reinforced PVC. It is ideal for fishing, tourism, hunting or just relaxing on the water. The model differs in an optimum ratio of weight, durability, spaciousness, the price and quality.

Estimated price of the boat - 15 thousand rubles.

Price up to 25 thousand rubles

PVC takes the first place in the ranking of boats. The model is designed for three seats. The boat is made of reinforced PVC and equipped with a rigid transom. The model is designed for swimming in closed fresh waters, but the quality of the boat allows it to be used in salt water.

Boats PVC "Flink" are available in three versions. They have a classic U-shaped hull with a glued-in transom. The bottom of the boat is made of a denser fabric.

Of the shortcomings of the model, one can name only a slight instability on the course.

The average price of a boat, depending on the modification, ranges from 19 to 25 thousand rubles.

Flink boats are chosen by a large part of fishermen and outdoor enthusiasts for their quality and reasonable cost. Advantages of the models of this manufacturer:

• excellent running performance of boats;
• ease of management;
• special design of the watercraft, designed for maximum safety of passengers;
• high quality of the German PVC material used in the production;
• wide model range;
• acceptable price.

PVC inflatable boats can be used in a variety of ways. Starting from fishing and hunting, ending with pleasant walks along the river, lake or other body of water. This rating includes the best PVC boats. We will tell about their strengths and weaknesses and current prices.

What do you need to know before buying?

Before making a purchase, analyze the information about the selected model. Most of them are controlled by oars and brute human power. Not every boat can fit a motor. If this happens, then you will need to register the boat and motor without fail.

An important factor is the size of the person or group of people who will be on board. On average, most boats can easily carry the weight of one fisherman, up to 100 kilograms, as well as all the necessary equipment.

Considering all the pros and cons of the models on the market, we have compiled such a list, which includes the best boats according to the 2018 version:

1. STREAM Dolphin-M

The model is an inflatable rowboat. It embodies all the latest developments for last years. High-strength PVC is used, which guarantees safety and ease of use. Thanks to its unusual shape with a raised nose, it can easily carry waves up to half a meter high.

Advantages:

• The bottom is hard, moisture-resistant plywood was used in its manufacture.
• High strength PVC.
• Unusual design in the form of a raised nose and high sides.

Flaws:

• The boat is quite heavy.
• It will be too cramped for two fishermen. Ideally, use it for sole use.

2. Hunter 280 R

The German-made boat is made of high quality PVC fabric. The O-shape gives better seaworthiness, allows you to fit several people inside and fishing gear. The high side will protect against high waves that reach 0.7 meters. At the same time, two anglers with full equipment can be on the boat.

Advantages:

• Good handling and maneuverability.
• A very easy move.
• Excellent build quality.
• There will be no difficulties with the assembly and disassembly of the boat.
• For all its dimensions, it does not have a large specific gravity.

Flaws:

• The kit comes with a very weak pump.
• For more comfortable use, you will have to buy an additional slant to the bottom. What is available is not enough.
• Although it is stated that two can be on the boat, they can be crowded.

3. Pilot Profi S-280-M

This boat attracts fishing enthusiasts with great attention to safety, ease of operation, maneuverability and simply excellent performance. For the bottom, a denser PVC fabric is used, making it comfortable to use. This is a cheap option that guarantees an excellent quality product.

Advantages:

• The design protects against waves up to half a meter high. This is ensured by the sides and raised nose.
• The position of the seats in the boat can be adjusted.
• The boat does not have a large specific gravity with an overall design.

Flaws:

• The bottom is of a tension type, so you can only fish while sitting.

4. Taimen N - 270 C

The model belongs to the rowing type and is designed for two fishermen. There is a special plywood on the bottom, which makes the bottom tight, allowing you to fish in a standing position. Also here you will find mobile seats, which also provide additional comfort. The total weight that the boat can carry barely exceeds two hundred kilograms.

Advantages:

• The bottom is rigid, which is achieved thanks to the slip-book and waterproof plywood.
• Use of PVC reinforced type.
• Design features will protect from waves up to half a meter.

Flaws:

• Large specific whole of the boat due to the hard bottom.

5. Leader Compact 265

The boat is made of reinforced PVC. Ideal for lovers of hunting, fishing and outdoor activities. However, the manufacturer does not recommend using it in strong winds. The bottom is rigid and consists of two layers: waterproof plywood and anti-slip coating.

Advantages:

• In tandem with a boat, you can use a motor up to 3.5 hp.
• The presence of a hard bottom.
• The main material is reinforced PVC.
• The boat has a small specific gravity.
• Convenient system of fastening of cans.

Flaws:

• Low sides do not allow you to safely be in the water with waves above 0.1 meters.
• The boat is very small, so it will be cramped for an obese person in it.
• You can not swim on it in windy weather.

6. Pilot M-330

This boat is a motor boat. Her main feature is that a person can use a low power engine and gradually increase it. There is no need to buy a new boat every time. It is also a big plus that the keel and cylinders are protected from abrasion by PVC. This model cannot be called inexpensive, but in practice it will pay back every ruble that the fisherman pays for it.

Advantages:

• Reinforced PVC fabric is laid out in five layers.
• Cylinders are reinforced at the place of installation of stringers.
• The transom can be fixed using a plastic holder.
• The kit includes a safety loop for the motor.
• There are seats that can be changed.
• A bar is installed along the perimeter of the boat with a wave breaker.
• PVC has additional reinforcement from the side of the keel and tapes on the bottom of the cylinders.
• The warranty service of the boat is 2 years.
• Small specific weight with the dimensions of the boat.
• A wide variety of colors are on sale.

Flaws:

• Very small boat capacity.

7. Aqua 3200 SC

Such a boat belongs to the motor-rowing type, that is, the fisherman can use both the motor and the oars. In its class, this particular model is considered the lightest in weight. Fishermen like it because there will be no problems with transporting the boat. Payol is assembled from individual elements made of aluminum.

Advantages:

• Low specific gravity for boats of this type.
• The transom is attached to a special belt.
• The keel of the boat is protected by PVC timber.
• Very dense reinforced PVC fabric.
• Along the perimeter of the boat, a correct bar is installed, equipped with wave breakers.
• It is possible to change the position of the seats.

Flaws:

• Low load capacity.

8. Hunter 335

The model belongs to the motor-rowing type of boats. It is popular among fishermen due to its small size and excellent operational capabilities. Please note that during production the model was additionally strengthened. This was done using an aluminum profile at the junction of PVC fabric.

Advantages:

• Using high density PVC fabric.
• Additional reinforcement in the area of ​​the keel, floor, fender and joints included in the basic package.
• Roomy enough for its size.
• It is possible to move the seats.
• Decent payload.
• The warranty period for the maintenance of the boat is five years.

Flaws:

• Large dimensions and specific weight of the boat.
• You will have to pay extra for strengthening the cylinders.

9. Cayman N-330

This boat can be attributed to the list of elite and legendary in Russia. The hefty price tag puts it out of the reach of the average fisherman and also indicates that it is the best quality option if you are not afraid to overpay. When designing it, the main methods of creating motor boats. Thanks to this, it is stable on the water and quickly develops the desired speed. Hunters and fishermen unanimously affirm her high quality and long service life.

Advantages:

• Excellent maneuverability.
• Good running qualities.
• Holds up well on the water, even in windy conditions.
• A fender is installed around the perimeter of the entire boat.
• Two seats can be attached to the cylinders for more comfortable fishing.

Flaws:

• When assembled, the boat has very large dimensions and weight.
• The density of PVC materials is inferior to cheaper counterparts.

10. Apache 3300 SC

This motoranya boat has an unusual balloon structure. Its 28 cm diameter helps to provide the best driving performance, maneuverability and comfort for the fisherman or hunter. Please note that if you compare the diameter of the cylinder with boats of this class, then it will be the largest. Thanks to this, the fisherman does not have to worry about the fact that he sets off in bad weather, and the peace of the water surface is disturbed by waves and strong winds. Another advantage is that due to the large cylinders, a person feels comfortable in the boat. Even moving at a serious speed, there is no feeling that you are about to fall out of the boat.

Advantages:

• The cylinder diameter is much larger than other boats.
• Very dense reinforced fabric, as the main material of the boat.
• Along the perimeter of the cylinders, wave breakers and correct beams are installed, which will prevent the boat from turning over on the waves.
• In the area of ​​the keel, PVC fabric has additional reinforced protection.
• It is comfortable to stay in the boat even for a long time, thanks to its excellent performance and great attention to human safety.

Flaws:

• There are no complaints about the technical side of the boat. However, numerous reviews often mention the problem of factory marriage. Of course, all this can be solved under warranty and the boat can be replaced, but getting a low-quality thing for decent money can ruin your mood or even lead to a fishing emergency that is dangerous to human life.

When choosing a boat for fishing or hunting, pay attention to its dimensions and weight, because if you do not have personal transport, then carrying it to the reservoir can be quite difficult.

There are no related articles.

PVC boat rating

In an effort to simplify the process of product selection for the client as much as possible, we have compiled pvc boat rating which are in the highest demand. When compiling this TOP, we used reviews real buyers online store, thanks to which the rating turned out to be as useful as possible. Now you don't have to worry about how to choose boat.

What product groups are included in the rating?

The catalog contains such categories of goods for which the rating was made:

• Rowing boats.
• With hinged transom.
• With fixed transom.
• RIB boats.

What opportunities does the proposed system open up?

Our online supermarket offers the widest range of boats designed for fishing and water trips. Without experience and knowledge of what criteria products must meet, it is difficult to make the best choice.

Using pvc boat rating, you will be able to short time pick up the best solution. The interested user is immediately invited to read the reviews of the owners and get reliable information about the product firsthand. Immediately in the TOP list the cost of the product is indicated, and when you click on the name of the product, the site visitor will go to a page with its detailed description.

Thus, the proposed system greatly simplifies the process of selecting goods and brings our cooperation with you to a new qualitative level.

Why is it worth shopping at the Vodomotorika store?

Customers who shop with us receive the following benefits:

• Reasonable price.
• Quality assurance.
• Qualified assistance in the selection.
• Opportunity to purchase stock items.