What design of a shelter for a pool in the country to choose: analysis of the model range. Canopy for a polycarbonate pool: advantages, types, do-it-yourself or better to contact a specialist Swimming pool under polycarbonate recreation area

Owners of country cottages and summer cottages very often think about building a pool on their territory. However, an outdoor pool implies constant care and cleaning of various debris. In addition, very often climatic conditions allow the use of this structure for a rather short period of time. Therefore, the most relevant and practical is the construction of an indoor pool, for example, right in the greenhouse.

Peculiarities

Caring for this design is much simpler and easier, it can be used throughout almost the entire spring, summer and half of autumn. Many owners install special heaters in the pools, this allows you to use the structure in almost any weather. It should be noted that the construction of such a structure requires large financial costs, and not everyone can afford it.

Therefore, polycarbonate pools in greenhouses have become an alternative option for many.

These closed structures have big amount benefits.

A polycarbonate greenhouse can be purchased at ready-made and the right sizes. Therefore, installation will not take much time.
The design reliably protects the interior from prying eyes.
You can use and enjoy the pool in almost any weather.
Thanks to the polycarbonate coating, the water will warm up much faster and more evenly.
In such a structure, protection from various insects is always provided.
In the manufacture of this structure, environmentally friendly materials are used.
Installation of the structure can be done by hand, which can significantly reduce financial costs.
In indoor pools, much less water evaporates.
The cost of these facilities is quite democratic.

Absolutely all family members can use the pool, the polycarbonate coating will reliably protect against various atmospheric precipitation and temperature changes. Thanks to the frame treated with special means, the design will delight for many years.

Advantages of polycarbonate

Until now, glass has been a very popular material for covering walls and roofs of greenhouses, but this is a very fragile material. Products differed heavy weight Moreover, glass has a high thermal conductivity.

Thanks to the latest developments, a material such as polycarbonate has appeared, with excellent technical specifications:

light weight;
strength and reliability;
transmits light well;
the sun's rays are evenly scattered inside the structure;
due to the good flexibility and elasticity of the material, you can create any shape;
increased resistance to atmospheric precipitation and influences;
the material is absolutely waterproof;
is resistant to mold and fungus;
the material has a high resistance to fire;
easy to sanitize;
has a long service life;
a huge variety of models made using a rich color palette.

Forms and models of the structure

The choice of a greenhouse for the construction of a pool must be approached thoughtfully. High humidity in the structure implies the use of materials with good resistance to corrosion and moisture.

Frames made of galvanized and stainless steel, aluminum, steel profile with polymer coating have enhanced technical characteristics and are resistant to various influences. It is not recommended to purchase frames made of wood and ordinary steel. These structures are exposed to high humidity and have short term services.

An important role in choosing a greenhouse is played by the shape of the product. It is necessary to choose a structure that can withstand significant loads during the winter period, strong winds.

Greenhouses can take a variety of forms.

Arch structure. Distinctive feature of these models is in excellent aerodynamic properties. The most popular and widespread option, the shape of the product provides unhindered snow cover.
For round pools very often use a dome-shaped design. A stylish and interesting building will decorate any personal plot. A distinctive feature of this design is the complex installation.
Greenhouses with single-pitched and double-pitched roofs. These structures are characterized by low resistance to precipitation in the form of snow and strong winds. Installation of these structures will not cause any particular difficulties, you can do it yourself.
asymmetrical designs. The frame of this greenhouse consists of one straight side wall and a semicircular one.

When choosing a particular design, it is necessary to take into account the parameters, all the features of the land plot and climatic conditions, the number of family members, etc.

Also, the designs of polycarbonate greenhouses are divided into two types.

Low. These structures are mainly used to protect the pool from various debris. Structures are divided into two types: reclining and sliding.
High. The height of the structure allows you to be inside the structure, walk, sit, and so on. In such facilities, you can install furniture, special heaters. The building is equipped with doors.

Installation work

Pool

The parameters and dimensions of the pool should be selected individually. Models are divided into two types: in-depth and mounted on the surface. To avoid building high vaults over the pool, it is better to opt for in-depth models.

There are two options for installing a pool.

The first option is to make a pool bowl with your own hands. To do this, you need to dig a pit. Its dimensions are individual. Next, you need to install the formwork inside the pit, prepare a sand cushion and reinforcement. Then you need to pour concrete. After it hardens, the surface is finished with tiles. This process of making an artificial reservoir takes a lot of time and effort.
IN this case pool bowl is selected and purchased in a specialized point of sale. The modern market represents a huge range of different models of these products. They differ in size, shape and material from which they are made.

The most popular models are made of propylene. These products are distinguished by excellent technical characteristics, increased resistance to temperature extremes and various mechanical and chemical influences. Products made of propylene withstand the movement of the soil, they are quite strong and reliable.

To install the bowl, it is also necessary to prepare a pit. The dimensions of the pit should exceed the parameters of the bowl by about thirty centimeters.

Before lowering the bowl into the pit, you need to carefully tamp the bottom and lay a layer of geotextile to avoid washing out the soil. Next, it is necessary to prepare a pillow of sand, only after all the manipulations are completed, the bowl for the reservoir is lowered into the pit.

Greenhouse

You can install a polycarbonate greenhouse over the pool with your own hands, without involving specialists.

To do this, you need to choose a greenhouse model that is suitable in shape and parameters, then all work is carried out in several stages.

It is necessary to fill the foundation with concrete and reinforcement. The depth of the foundation base should be about fifty centimeters.
Next, you need to assemble the structure, exactly following the instructions.
After that, you need to carefully fix the frame on the foundation. To do this, use special bolted connections.
Then it is necessary to carefully fix all the arcs and stiffeners with the help of special fasteners.
After performing all the manipulations to fix the structure, the frame should be treated with special anti-corrosion agents and painted in the desired color.
Upon completion of the staining, you can proceed to the sheathing of the structure with polycarbonate, following the previously prepared drawings.

The summer season in Russia is not very long. Throughout the summer, in many regions they bathe in natural reservoirs: lakes, ponds, rivers. If there are no natural reservoirs nearby, an artificial pool is installed from the usual means on a personal plot. However, the pool needs additional care, as dust and various plant debris can get into the water. To protect the structure from such troubles, a special pavilion is built above it.

We build with our own hands:

Swimming pool-greenhouse

The independent process of building a simple pool-greenhouse is not laborious. Sheathed with polycarbonate or other translucent materials. The frame is made of a profile pipe, which gives the building a neat and aesthetic appearance. The main purposes of the pavilion:

The building allows you to equip a recreation area with increased comfort near the country pool;
Provides protection for the structure from various contaminants, and does not need regular cleaning;
Protects swimmers from the negative effects of ultraviolet radiation;
The operation of a greenhouse pool with a polycarbonate pavilion is possible under any weather conditions;
There is financial savings on electricity and other methods of heating the pool;
The canopy increases the life of the pool and reduces maintenance and repair costs.

REFERENCE: The canopy is constructed at various heights. The lowest one is not higher than 1.5 meters, the highest one closes only the pool itself, or the owner has the opportunity to equip the entire internal space near the reservoir.

Materials and building requirements

Using sheet polycarbonate, you can build a canopy over a pond with your own hands, without spending a lot of effort and time. All you need is the following materials and tools:

polycarbonate;
Square or rectangular profile pipe;
welding machine;
Shovels and concrete mixers;
concrete mixture;
fasteners;
Electric jigsaw and screwdriver.

Pool-greenhouse for a summer residence:

The polycarbonate pavilion has many advantages. The main ones are:

During construction, environmentally friendly materials are used;
The pavilion, together with the materials from which it is made, is durable and lightweight, so there are no extra costs during transportation;
The structure is resistant to adverse weather conditions;
Thanks to polycarbonate, the volume of moisture evaporation is reduced in the greenhouse pool, and it also helps to maintain an optimal level of humidity;
The water in the pool is protected from the appearance and further reproduction of pathogenic microflora;
The canopy can be built with your own hands, without the involvement of specialists, you just need to have the necessary materials and tools available;
Building materials can be purchased at an affordable price;
Service life exceeds 10 years;
The design is fire resistant and has good light transmission;
Easy building maintenance. You can clean polycarbonate from dirt with ordinary detergents. The frame of the structure is regularly painted to prevent rust formation. The wooden frame is periodically inspected for the presence of decay and traces of mold.

REFERENCE: The optimal thickness of polycarbonate for a canopy is more than 8 cm.

Greenhouse pool requirements

The created artificial reservoir is protected in various ways:

The shelter covers the pool on one side or several. Basically, the canopy is built full-fledged, for greater reliability of the pavilion;
The cover can be stationary or sliding (telescopic). The advantages of the latter include rapid transformation. However, the rather complicated manufacture is a disadvantage;
The type of bowl is determined by the shape of the reservoir itself: it can be rectangular, combined and round.

The polycarbonate pavilion, built independently over the country pond, has a different shape:

Asymmetrical. Appearance - semi-arch. With a vertical wall along the building plus a vault with opposite side. Vertical walls from the end serve as a place to install the door. The form adds volume to the pavilion and allows you to place a recreation area;
Canopy in the form of a dome. It is built if the pool is round. During self-construction, polycarbonate is cut into segments, which gives the building a spectacular and aesthetic appearance;
Arched and pitched canopies have two longitudinal vertical walls. Build Them with my own hands won't be too difficult.

Features of the installation of the structure and its strengthening or do it right?

Pool-greenhouse needs a solid foundation:

The foundation is poured with a height of 50 cm, using concrete and reinforcement, and only then the frame is built;
Before the construction of the frame, the shape of the future pavilion is determined;
Using bolted connections, the frame is fixed to the foundation;
With the help of special fasteners, arcs and stiffeners are fixed;
An anti-corrosion coating is applied to the frame, and then painted;
After the pavilion is sheathed with a covering material.

Possibility of year-round operation

The short summer does not allow using the potential of the country reservoir in full. During the rainy season or with the onset of autumn, being near the pool does not give any pleasure. In this case, it is necessary to build a pavilion above the reservoir for year-round operation:

The structure is mounted directly on the foundation;
Before installing the frame, reinforce the base to increase the life of the building;
Thanks to the polycarbonate dome, the illusion of weightlessness is created. Due to the greenhouse effect inside the pavilion, you can swim in the pool in any weather. For the operation of the pool all year round it is necessary to build a high hermetic pavilion. Dug into the soil, it will absorb the heat of the earth, and the structure of the roof will prevent heat from escaping to the outside. In regions with harsh winters You will need a separate internal heating system.

In the absence of strength and time for the construction of a greenhouse pool by oneself, ready-made kits are purchased from specialized companies. The high cost of structures from Germany, their advantage is high quality. Structures from China are affordable, but far from high quality. Russian buildings occupy the "golden mean" in terms of cost and quality.

Many summer residents want to equip their site for a comfortable stay. But the outdoor pool creates a lot of difficulties. Therefore, it is worth equipping a greenhouse for the pool. It will reliably protect a reservoir from a rain, snow and pollution. But the most important thing is that the greenhouse will create comfortable temperature conditions for relaxation.

Arrangement in a polycarbonate greenhouse pool has a lot of reasonable arguments. But the good news is that you can do all the work yourself. Polycarbonate will serve as a covering material, and the frame can be made from metal pipes.

The purpose of the pool in the greenhouse:

Protective polycarbonate coating can extend the life of the pool;
You can save on pool heating;
You can swim in any weather;
Polycarbonate protects against ultraviolet radiation;
Simplified care of the pool, as it is not so often polluted;
This building is an excellent recreation area.

The pool can be equipped in a greenhouse of any shape. The height of the greenhouse may also vary. You can make a low structure, no more than 50 cm. Or equip a high greenhouse - when only a reservoir is covered. At the same time, polycarbonate itself has a number of advantages that allow you to make a choice in its favor.

Advantages of polycarbonate for arranging a pool in a greenhouse:

Large sheet sizes minimize the number of joints;
This is a durable material;
Polycarbonate does not burn;
It is resistant to mold, fungus and decay;
The material is waterproof;
Does not pass ultraviolet;
Has good flexibility;
Evenly scatters sunlight;
Transparent, allows the rays of the sun to penetrate;
Sturdy enough;
Easy.

But this is not all the advantages of a pool in a polycarbonate greenhouse. The greenhouse allows the water in the pond to be constantly warm. There is no need to use any heating system. In addition, spending time in such a pool is absolutely safe, because neither snakes nor beetles can penetrate the water.

The vaults of the greenhouse allow you to maintain a stable temperature inside the room.

In addition, polycarbonate will hide everything that happens inside from prying eyes. People only see silhouettes. You can buy such a design in finished form or build it yourself. Such work can be done by everyone with their own hands.

Types of greenhouses for a pool in a greenhouse

First you need to decide on the choice of material for the frame. There will be high humidity in the room, so it is best to choose metal, as it is resistant to corrosion. Suitable galvanized or stainless steel, aluminum or steel profile.

Ordinary metal or wood will quickly deteriorate in an aggressive humid environment. But the right frame can last up to 25 years.

The next step is choosing the shape of the greenhouse. It is worth considering the aesthetic component, since such a pavilion in the country should fit into the overall design. You should also pay attention to the ability of the greenhouse to withstand any weather.

Types of greenhouses:

Arched. Thanks to the tunnel shape, the snow will not linger on the roof.
Domed. This option is suitable for round pool. But such a greenhouse is quite difficult to build.
Pitched. There may be 1 or 2 slopes. But to build such a building is not easy.
Asymmetrical.

The right choice depends on the characteristics of the land, the climate of the region and the number of people. It is also important to consider the size of the structure. The entrance to the greenhouse is equipped with any kind of door.

The nuances of installing a frame pool in a greenhouse

The frame pool should be built in such a way that all family members and guests can freely swim in it. Before choosing the right arrangement, you should look at reviews and information about such pools on the Internet. Before work, it is worth preparing the installation site and making a drawing.

2 types of pool depending on the type of installation:

Surface;
Profound.

You need to assemble the frame, following the instructions. A greenhouse for a pool will require a preliminary pouring of the foundation so that the building lasts a long time. The frame is attached to the base with bolts. Next comes the installation of arcs.

For a greenhouse with a pool, you will need to fill in the foundation with a depth of 50 cm. Perform a strip base using concrete and reinforcement.

After installing the frame, it must be treated with special anti-corrosion agents. Next, you need to paint in the desired color. The final stage will be the sheathing of the greenhouse with polycarbonate.

Do-it-yourself installation of a pool in a greenhouse

First of all, you need to choose the right place in your summer cottage. You need to choose an open area, without the presence of trees and buildings nearby. The soil in this case is best suited clay. It will act as a natural waterproofing agent. The next step is to decide on the shape of the pool. It is better to choose a rectangular or round shape.

Special attention should be paid to the choice of cleaning equipment. For a country pool, a skimmer cleaning system is suitable. It is easy to install and inexpensive. Next, you should make a bowl for the pool.

Pool bowl material:

polystyrene blocks;
concrete blocks.

The first option is quite light and breathable material. Everyone will be able to install the pool with the help of polystyrene foam blocks. At the same time, the material has excellent thermal insulation properties, so the water in the pool will always be warm.

Concrete pouring will be required at the end of the work. Also concrete will need to compact the blocks and fill all the gaps. Be sure to carry out the reinforcement of polystyrene foam.

If necessary, the blocks can be easily cut with a hacksaw and adjusted to the desired size.

Before starting work, you should consider all communications. They need to be stretched inside the blocks and cut out the necessary holes. You should also equip a place for the filter.

Installation of the pool using concrete blocks guarantees a longer service life of the structure. For work, ready-made compressed blocks are used. First, the surface is well sealed, and then the material is laid. We must not forget to reinforce every third row.

After arranging the pool, it is necessary to cover it. For this, a frame and polycarbonate are used. The assembly is similar to the installation of a conventional greenhouse.

B pool in the greenhouse (video)

Everyone can make a pool in a greenhouse. To do this, it is important to choose the right place, make drawings and decide on the shape of the reservoir. Subject to all the rules, you get a comfortable recreation area for the whole family.

Examples of pools in a polycarbonate greenhouse (photo)

Of course, such a structure requires additional care, if only because its water will be clogged with dust and various plant debris. To save him from this kind of trouble, a protective pavilion is erected over the pool.

To date pool-greenhouse is actively gaining popularity. By the way, the owners of this kind of structures have already appreciated them and left a lot of positive feedback on this.

Swimming pool-greenhouse

The simplest pool-greenhouse easy to build by hand using polycarbonate or other translucent materials for this.

As a frame a profile pipe is usually used. Its use allows you to give the structures a neat and aesthetic appearance.

This kind of building has several purposes.:

With the help of polycarbonate, you can arrange a comfortable recreation area next to the country pool.
The pool-greenhouse at their summer cottage is perfectly protected from pollution and does not require regular cleaning.
On sunny days, those who swim in such a pool are perfectly protected from harmful human body ultraviolet radiation.
The pool-greenhouse with a polycarbonate cover can be operated under any weather conditions.
Significantly reduce the cost of electricity and other options for heating the reservoir.
The pavilion extends the life of the pool and reduces the cost of its maintenance and repair.

The structure above the pool is built at different heights. The low one usually does not exceed half a meter, and the high one covers only the bowl of the reservoir or allows the owner to equip the entire interior space around the pool.

Materials and building requirements

You can make a pavilion over the pool from sheet polycarbonate yourself, it does not take much effort and time. To this end, it is necessary to prepare the following materials and tools:

Polycarbonate.
Square or rectangular profile pipe.
Welding machine.
Shovel and concrete mixer.
Concrete mix.
Fasteners.
Electric jigsaw and screwdriver.

Benefits this type of shelter, like polycarbonate, has a lot. Some of the most important ones can be highlighted:

In the process of building a pool-greenhouse, environmentally friendly materials are used.
The building itself, as well as the materials from which it is made, is durable and light in weight, which does not require extra costs during transportation.
The design is resistant to negative manifestations of the environment.
Inside the polycarbonate pool-greenhouse, the volume of water evaporation is reduced, and the optimal humidity regime is maintained.
The aquatic environment of the pool is well protected from pathogenic microflora, in particular, from its occurrence and subsequent reproduction.
The structure can be built independently, without involving specialists for this purpose, but simply by preparing the necessary tools and materials.
Building materials are affordable.
Long service life exceeding 10 years.
Pavilion fire resistance and good light transmission.
The building is easy to maintain. Polycarbonate is cleaned of dirt using conventional detergents. The frame of the building (from a profile pipe) periodically requires painting to protect against rust. And a structure with a lumber frame needs to be checked from time to time for the presence of rotting and mold.

For shelter, polycarbonate with a thickness of more than 8 mm is more suitable.

Building Requirements

The pool bowl is protected in different ways. The canopy closes the pond on one side or several. Often a full-fledged pavilion is built - the most reliable shelter.
The cover is selected stationary or sliding (telescopic). The latter is quickly transformed: this is its big plus, but it is quite difficult to manufacture. This is a minus.
The type of bathing bowl determines the shape of the pool itself. It is rectangular, combined, and also round.

The polycarbonate pavilion itself, built over the country pool and made by hand, comes in different shapes:

Asymmetric. Reminds me of a semi-arc. It has a vertical wall along the building plus a vault on its opposite side. Standing vertical end walls act as a place for mounting the door. This option makes the building voluminous, capable of accommodating a recreation area.
Pavilion in the form of a dome. It is installed if the bowl of the reservoir has a round shape. With its independent construction, polycarbonate will have to be cut into segments. But on the other hand, the construction turns out to be spectacular and aesthetic.
Arched and pitched pavilions have two longitudinal vertical walls. Building them yourself is pretty easy.

Features of the installation of the structure and its strengthening

A greenhouse pool requires a good foundation. To do this, you need to pour a foundation of 50 cm with concrete and reinforcement, and then build a frame.
Before erecting the frame, you should decide on the shape of the future building.
The frame on the foundation is fixed with a bolted connection.
The arcs and stiffeners of the frame are fixed with special fasteners.
The frame is coated with anti-corrosion compounds, and then painted.
Next, the structure is sheathed with a covering material.

Possibility of year-round operation

As noted above, the pool's potential cannot be fully utilized during the short summer season. In particular, when the rains begin or autumn approaches, even sitting next to a pond will no longer work: it will not bring any pleasure.

But you can make a greenhouse for the pool in this way, that the facility is operated all year round. For this, the installation of the structure is carried out directly on the foundation. Of course, before installing the frame, it is necessary to strengthen the base so that the finished building serves its owner for as long as possible.

The polycarbonate dome of the pool will give the building the illusion of weightlessness. The room will be transparent and closed from all sides. The greenhouse effect created inside will allow you to swim in a comfortable environment in any weather.

It should be noted that only a high hermetic pavilion will allow the reservoir to be used all year round.

Dug into the ground, it will take on the heat of the soil, and the roof structure will not allow this heat to escape. But provided that the region has mild winters.

Otherwise, for this purpose, you will have to consider a separate internal heating system.

Photo

Swimming pool in a polycarbonate greenhouse: photo.

If there is no time and energy for self-construction of a greenhouse pool, ready kit for its construction, you can always order from a specialized company and use the services of its specialists.

The most expensive so far are considered German designs, which differ high quality. Chinese buildings are affordable, but they are much inferior in quality.

But Russian designs are a kind of "golden mean" in terms of price and quality. Therefore, they are often purchased by lovers of year-round swimming.

Useful video

And here are videos about greenhouses under the pool.

If you find an error, please highlight a piece of text and click Ctrl+Enter.

Rest and recovery are now only a dream for many people, because not everyone can afford a train by sea. The reason for this is simple - there is not enough money. This is not encouraging, but the situation can be corrected if you are a happy owner of a house. If the sea is unattainable, then you can make an indoor pool in the country, which will also please you and your family.

You just need to make a little effort, and the summer cottage will become a wonderful home resort. A few years ago it was almost impossible to create an artificial reservoir on the site.

Today, everyone can afford this luxury item. Yes, yes, and all because bathing bowls in their variety of types and prices have expanded so much that it will not be difficult to choose a pool according to your means.

Build a swimming pool on the site- a great way to relax in the summer heat. If it is of a decent size, then you can not only splash, but do swims in the mornings and evenings. And how much joy the children will have! Excellent well-being is guaranteed to you.

Yes, and cottages of the 21st century are no longer so similar to those that were before. Now I’m going out of town not to starve myself by planting cucumbers and tomatoes, as well as many other households. works. Exhausted by the pace of city life, residents of large cities turn plots into recreation areas, designed “for themselves”, and in this case the pool will be a great addition.

Artificial reservoir in the country- this is not only a new comfort zone, but also a place of a special microclimate and even a water tank for emergency cases when there is nothing to water the flower beds. In general, the benefits of the pool are obvious if you install the tank correctly and operate it strictly according to the instructions.

Which pool to choose?

In today's market, you will find three popular categories of pools:

Collapsible.
Stationary.
Inflatable.

All of them differ in shape, design and size. These are the main parameters that will affect the choice. You yourself will choose what to stay on, based on their size of the site, conditions and preferences. But it should be said that each of the options is good in its own way.

Stationary

The name speaks for itself. Such containers are installed on a turnkey basis. Such pools are either medium or large. According to the type of installation, they are divided into:

Frameless

Frameless structures built into the ground

To operate such a model, it will have to be equipped with some systems, at a minimum, this is a system for supplying water, draining and cleaning. If you do not take care of this in advance, in a couple of weeks you will not be swimming in clean water, but in dirty liquid. You can refuse the cleaning system, but think for yourself - where will you drain 14 tons of water, and how much will it cost you to fill the pool every 2 weeks clean water? These costs will be more expensive than you purchase and install the treatment once.

It looks great, and if you are mentally prepared to endure all the difficulties with installation and arrangement, then you should not refuse this option. If not, give preference to a frame tank, as installation problems (and costs) will be many times less.

But many summer residents are seriously concerned that they will have to spend a lot of time cleaning, so they decided to make an indoor pool in the country with their own hands. This is the right decision, since the pool will need to be cleaned only once every six months.

When choosing the type of container for the dacha, do not forget about the climatic features of the region. Most containers, even without water, simply will not withstand local frosts, so you will have to invest in frost-resistant models.

collapsible

Such pools are classified as small and medium in size. The thing is that it is almost impossible to assemble it yourself, and the procedure is quite expensive. But the advantage of the model is that it is ideal for unguarded areas. It can be collected, filled with water upon arrival, and dismantled in the fall and sent to the barn.

This type of pool also needs filtration, but you can not install complex systems. For small volumes, disinfection can be limited to reagents that are harmless and of high quality.

Inflatable

Naturally, such pools cannot be large sizes, which is wonderful. Due to the size of the pool, it is suitable for those owners whose plots are not so large, and the advantage is that storing such models is not problematic - you can even fold them into a sofa. You can also take the pool with you for a picnic. For large models, a metal frame is provided - it is assembled from hollow tubes (made of aluminum).

What are indoor pools made of?

When choosing a pool, remember that they can be made from any material. This is especially true for stationary models. Manufacturers have taken a liking to materials such as plastic and other composite materials.

Polypropylene products have good performance and tolerate temperature fluctuations. They can be used all year round.

Plastic containers are more fragile and may burst when the temperature drops. It is not used to create large tanks, and for medium sizes it is not uncommon. It is also used for folding structures and decorative colored pools.

More practical models are made of composite. The material can transform, but the body does not break through. The walls cannot be scratched or broken. Such a pool will be durable, so it is used to create an indoor pool.

But all species have one drawback- they have a standard appearance, so if you want unusual pool, you will need to build it yourself. Yes, it's expensive, but the way you like it.

Separation by type of filling

According to the filling methods, pools can be:

Overflow.
Skimmer.

In the first models, a grate is made in the tank through which overflowing water enters the drive. Such a system visually increases the size of the container and allows you to always keep a certain level of water.

In skimmer models, everything is somewhat different. You can’t fill them to the brim at least 15 cm, since there are no drives. The water that has entered the tank is cleaned through the skimmer. This is not a costly option, so it is very popular in the private sector.

Finishing materials

Do-it-yourself indoor pool in the country house can be finished with the following materials:

Polypropylene.
Mosaic.
Tile.
PVC film.

The film is sold in rolls and can be of any color. The most popular are blue, white, blue shades. The role of such a finish has a dual meaning: waterproofing and aesthetics.

Polypropylene is a polymer that has high strength, is easy to weld and is resistant to aggressive climate conditions. Usually buy blue polypropylene.

But mosaics and tiles are chosen with a low level of water absorption. Ceramics is used for finishing the common pool, and the mosaic will fit perfectly into the suburban area. A pool with such a finish will appear visually deeper.

Location

It is not enough to choose a pool, you should think about how you will take care of it, so we suggest planning everything in advance.

Important: if you have clay soil in your area, then this is an ideal option for installation.

Consider the following when planning your tank placement:

If your soil is clayey, you may not even choose a place to install. If the waterproofing fails, it will stop the leakage of water.
The place where you plan to place the pool should have a natural slope. In this case, it will be easier for you to dig a pit and find a place to install a drain system.
Do not place an indoor pool in the country where there is shade from tall trees. Plants sense moisture and can easily damage waterproofing. The most aggressive trees are willow, chestnut and poplar.
If the pool is located near the water supply, it will facilitate the filling of the tank with water.

Dimensions

The ratio of length and width is correlated with the general purpose. If you want to swim, give preference to a rectangular shape. For a simple "splash" it is better to make a round shape. Depth will also be important. If you are a fan of jumping from the side, then the bottom should be at least at a depth of 1.5 m. To place the tower or springboard, you will need more depth - at least 2.5 m. standard depth.

The most difficult thing with creating an indoor pool with your own hands will be a combined type that is suitable for both children and parents. The zones will have to be separated by partitions, which will go from the very bottom. So the children will be protected from falling into the depths.

Attention! In this type of pool, a flat bottom should be made, which will smoothly fall. Sharp jumps are unacceptable for safety reasons, because walking along the bottom you can inadvertently skip the line and choke. Don't disregard this advice.

Decoration of the indoor pool in the country

When you get to decorating, keep in mind that you have a pool, not a pond, and you should style it accordingly. This is done using paving slabs or wood decking. The pool bowl can be hidden behind the stepped deck. If you are planning a large stationary pool, entrust this matter to professionals.

A distinctive feature of the pond will be the presence of a cleaning system, draining, for example, heating / counterflow. To do this, you will need a utility room, which can be made in the form of a beautiful house. The design of the room or the roof of the pool does not require frills.

Plants as decoration

If the indoor pool in the country house will be placed on the street, decide what you want to see around. When painting a plan and choosing an idea for plants, do not violate the main rule:

“There is no need to plant plants near the pool or on its shore. Water, with chlorine in it, will kill them, and you can forget about comfortable swimming among beautiful plants. ”

To do everything in at its best, plants will need to be planted in tubs or containers. In this case, there will be no interaction with treated water. As for the plants themselves, choose those that can withstand all weather conditions. These include juniper, Chinese rose, oleander, agapanthus, glorious yucca, southern cordilina.

Add-ons

Making an indoor pool in the country with your own hands is not so difficult, but decorating it and making it a full-fledged recreation area is not easy. The lighting of the pool will help you with this. So, you can enjoy swimming in the evenings. A fireplace or a fireplace will also look spectacular. Such elements will relax and add comfort.