Special gloves for the horizontal bar. Gloves for horizontal bar (comparative review). Where to buy gloves
Most people involved in the horizontal bar are interested in where you can get gloves for the horizontal bar. After all, after classes, corns may appear that do not look very beautiful. And in general, they can deliver a lot of trouble to their owner. In addition, due to calluses, classes on the horizontal bar can bring discomfort, as your hands will hurt.
Why are gloves needed?
Many people think that gloves are not needed for the horizontal bar, but athletes who have been training for more than one year are advised to purchase them. Indeed, after pull-ups and performing other tricks, calluses may appear that do not adorn the hands of a man at all. Perhaps in the future you will want to work in a serious enterprise, but you may not be accepted there if appearance hands will not match.
In addition, during exercise, the hands begin to sweat. And this, in turn, leads to slipping off the horizontal bar. If you wear gloves, they will increase friction, resulting in reduced slip. Therefore, it is advisable not to start performing tricks without gloves. In addition, you can make them at home from improvised materials or other gloves.
The choice of materials for sewing gloves
Gloves for the horizontal bar can be made from ready-made purchased products. And belonging to different price categories. It is very important that the gloves for the horizontal bar are comfortable and durable. You also need to remember that in the case of cycling gloves there are several nuances. Very often their back side is open. Moreover, the manufacturer made it this way on purpose, for better ventilation. Therefore, in winter time they will be quite cold in them, although they are very comfortable in summer. To engage in them on the horizontal bar in winter, you need to pick up soft material and make two tabs out of it that will completely close the holes. If the gloves are leather, then the material for closing the holes should also be the same.
Construction gloves also have their drawbacks. First of all, it is their quality. Just a few workouts can ruin them completely. There are negative sides to any gloves, even the most expensive ones. That is why many decide to sew them for themselves. But first things first.
We alter construction gloves
Many are wondering how to choose gloves for the horizontal bar. It doesn't have to be a lot of money though. After all, even ordinary construction gloves can be used during classes on the horizontal bar. Moreover, they can be easily and quickly altered. Of course, their appearance does not attract attention, but they are quite inexpensive. Due to this, you can purchase several pairs at once, and then use them until they are worn out to holes. But we are not talking about the cheapest gloves, but about the more expensive ones, which are rubberized from the side of the palm. They will help make training on the horizontal bar much more comfortable. You can buy them both in a hardware store and in the market. Moreover, the second option is likely to be cheaper.
Usually these gloves cost no more than 30 rubles. There are several types of them, which also affects the cost: with pimples, stripes and fully rubberized. In order to make good gloves for the horizontal bar, you need to take two pairs of the above products. You need to put both on your hands and take them off so that they remain one in the other. Now you need to sew them together to make them thicker.
How to alter cycling gloves
They are also often worn by athletes involved in the horizontal bar. They are usually made of a fairly dense material, therefore, thanks to them, corns on the hands rarely appear. The cost of models varies and ranges from 200 to 2000 rubles. Another advantage is that they are made of leather, so the hands in them will not slip at all. However, very thin leather is usually used to create them, so they quickly lose their appearance and tear.
Such products also have a number of disadvantages. They are not always convenient to use. This is especially noted by men with rather large palms. In addition, despite the high cost, they can be used for no more than one season, as they wear out very quickly. To facilitate their use during exercises on the horizontal bar, you need to take an elastic band and sew it on top. It should be enough to wrap your hand around. So, in the process of performing tricks, you will not have to worry that your hands are slipping.
Can weightlifting gloves be altered?
You can also use weightlifting gloves for pulling up on the horizontal bar. They are inexpensive: from 300 to 800 rubles. The main advantage of such products is that they provide good ventilation of the hands. In addition, there is a dense leather coating on the side of the palms, due to which the hands do not slip. However, due to such thick skin, they may not always be comfortable. However, experts say that this is one of the best models, which can be used while working on the horizontal bar. But in order to deal with them in the summer, you should remove the inner coating. You can do this with a knife. Naturally, you need to act very carefully.
Made from wool gloves
Ordinary woolen gloves for training on the horizontal bar may also work. Their cost ranges from 200 to 1000 rubles, although you can find cheaper options. It is very convenient to use them with special straps, because without them the hands will slide quite a lot. You can wear them only in the winter, but in the summer it is better to refuse them. And in general, it is not possible to perform all the elements with them, since the hands are very slippery. To avoid this, you can take leatherette, put on a glove and transfer the dimensions of the hand to the material. Then cut and sew to the glove from the side of the palm.
Where to buy gloves?
The cost of gloves varies, and it usually depends on their type. You can buy such products in a specialized store or in the market. Both options have their pros and cons. Gloves are much cheaper on the market, but when you buy them in a store, you can be sure of their quality. In addition, when purchasing products, you need to know the exact size of the hand. Therefore, before shopping, it is recommended to measure your hand with a centimeter to determine the approximate size. Usually sellers do it themselves. Of course, you can try on gloves directly in the store to choose the most suitable ones.
By the way, you can sew gloves for the horizontal bar with your own hands. To do this, you need to buy only the material used in the process.
Sewing gloves from improvised materials
Many are interested in how to make gloves for the horizontal bar with their own hands. Such products have a huge advantage: only proven sewing materials will be used, so the durability of the gloves can be increased. First of all, it is necessary to determine what fabric will be used for their manufacture. Usually the choice is between dermatin and leather. Of course, it is quite possible to sew such products on your own, but you need to have at least primitive skills in cutting and sewing.
Now you need to determine the size of your hand. It needs to be measured. If there is no desire to measure anything, then you can put your hand on the fabric and circle it with chalk or a bar of soap. Then cut out two pieces for each hand and sew them together. Velcro is better to sew on at the top so that the gloves are easier to put on and take off. You can decorate the resulting products with buckles, chains and the like. Although these trinkets can only interfere while working on the horizontal bar. So that the glove does not lose its shape, it should be stored in a special bag or box.
You should not start exercising on the horizontal bar without gloves. After all, not only corns can appear in this way, but also a variety of injuries. Hands are very slippery, so you can fall. And this is fraught with dislocations and even fractures.
You can be an experienced athlete - a crossfitter, endlessly, but not be immune from blisters, slips, and even injuries. For results when pulling up on the horizontal bar, you can use gloves that will prevent the appearance of corns, strengthen your grip and grip on the crossbar.
Why use pull-up gloves
- Thanks to the quality coating, the gloves can strengthen the grip with the horizontal bar, and prevent slipping of hands and possible consequences.
- Gloves can increase the number of pull-ups because relieve potential pain when rubbing against corrugated, or with peeling paint, crossbars, they do not allow rubbing corns, because of which the exercise becomes impossible to perform, although there is still strength in the muscles.
- Can insure when pulling up due to special devices - hooks, straps that are attached to the horizontal bar and stabilize the wrist, improving grip and preventing falls.
- Gloves are required when exercising outside in the winter, preventing hypothermia of the joints of the fingers and hands.
What are the types of gloves for the horizontal bar
- Cropped Finger Gloves– for weightlifters, cyclists and fitness enthusiasts. These gloves completely cover the palm, and light and breathable materials are used on the back. For weightlifters, a very dense leather coating is used, for the rest, thinner leather, leatherette, fabric, nubuck, suede, rubber can be used. (Approximate cost from 400 rubles.)
- Gloves with fingers for pull-ups and workout – inner side The palm is made of materials that improve grip on the bar, while at the same time, lighter materials on the back. (Approximate cost from 1700 rubles.)
- Wristbands or gloves with hooks- designed for the horizontal bar, iron hooks are attached to the wrist, which are put on the crossbar, and the brush is wrapped around them from above. Relieves stress from the hands and forearms. (Approximate cost from 1500 rubles.)
- Pull-up pads- Rubber grips for palms with rubber bands for fingers. Rubber coating improves grip. (Price from 450 rubles)
- construction gloves– used as economy, the surface of the inner side of the palm provides more grip and prevents the appearance of corns. The material of such gloves wears out quickly. (Cost from 15 rubles)
- Do-it-yourself pull-up gloves. You can use old leather gloves, if desired, cut off your fingers, such material will hold a good grip.
How to choose gloves for training on the horizontal bar
- It is better to choose full gloves with fingers, this will prevent the appearance of corns on the fingers.
- The inner surface should be made of non-slip material - leather, rubber, suede, but at the same time thin enough so that the thickness of the material does not impair the grip.
- Choose gloves clearly according to the size of the brush.
Top Brands
WORKOUT
WORKOUT- the brand specializes in products for and produces high-quality gloves for the horizontal bar. You can choose the design of gloves individually and for every taste. The cost is from 1700 rubles.
POWER SYSTEM
POWER SYSTEM– the Czech manufacturer offers models for fingerless pull-ups, cost from 700 to 860 rubles.
Mad Max
Mad Max- The company produces fitness gloves of various designs for men and women. The cost ranges from 490 to 1100 rubles.
Conclusion
You can choose any models - different colors and designs, expensive and more budgetary, the main thing is that the gloves provide good grip without slipping, prevent injuries and blisters. Usually, manufacturers give a guarantee of the service life of gloves up to 1 year - it all depends on the regularity of training. It is important to choose gloves to enhance the effectiveness of training, and not just as a stylish accessory.
Useful video: how to choose the best gloves for the horizontal bar
It is recommended to use gloves for sports on the crossbars. They are one of the most popular accessories used by pull-up enthusiasts. It must be approached responsibly, because, as right choice can cause injuries to the skin, cause the formation of scars and calluses.
Why is it necessary to wear seals for training on horizontal bars:
- to soften the pressure on the hands when exercising on the horizontal bars;
- help prevent sprained wrists;
- help prevent the formation of calluses and scars on the palms;
- absorb sweat, which eliminates slipping from the horizontal bar.
Manufacturing material. When choosing gloves, be sure to pay attention to the material from which they are made. Gloves made of leather or neoprene material are considered the best. Nylon gloves are not recommended due to their high slip rate.
Has a wrist strap. By using gloves with a retainer, the likelihood of sprains is reduced.
Suitable size. Gloves for exercising on horizontal bars must be suitable in size, as this will ensure the convenience of exercising.
For sports on horizontal bars, these types of gloves are most common.
construction gloves.
This type of gloves is made of fabric materials, covered with rubber either completely or on one side, or with rubber pimples. We can say that they are comfortable enough for sports, the only drawback of their use is their fragility.
Cycling gloves.
The material for the manufacture of this type of gloves is genuine leather. They help prevent the formation of corns. Due to the cut fingers, the gloves of the phalanx of the fingers can be injured. The disadvantage of this type of gloves is that they are made from a thin layer of leather, as a result of which they will also not be durable in use.
Weightlifting gloves.
In these gloves, fingers are heavily cut off, part of the gloves on the palm is made of thick leather, the back of the gloves is made of mesh fabric. This type of gloves is ideal for training on the horizontal bar, which is wrapped with plaster, electrical tape or other material that will provide high grip. The disadvantages of using weightlifting gloves is that the fingers are cut off quite heavily, wrinkles form at the folds due to thick skin, which makes them uncomfortable to use.
Wool gloves.
Perfect for skiing in the winter. Due to the fact that they completely cover the surface of the palm and woolen material, it is ensured good glide on the horizontal bar. The only downside to using them is their durability.
Fitness gloves.
For sports on the horizontal bar, you can use special gloves designed for fitness. They are made of dense material, the inner side of the palm is made of leather. Unfortunately, they are only suitable for inactive exercises on the crossbar.
Special gloves for exercises on the horizontal bar.
Due to the fact that the gloves are made of a special suede fabric, they provide protection against the formation of calluses on the hands, durable and comfortable to use. This is an ideal option for durability and inexpensive price. The only nuance of their use is that they are afraid of moisture.
From the foregoing, we can conclude that saving on such an item of equipment as gloves is not worth it, because it is the right choice of gloves for exercising on the horizontal bar that will ensure convenience and safety.
To facilitate the selection process suitable gloves, let's turn to the history of the appearance of various models in our store. This will allow you to understand the logic behind each one and help you decide which gloves are best for your purposes.
In the beginning there was a FORMULA!
The first gloves that we developed and began to produce under our own brand of steel, which have already become legendary,. Because of the F1 article number, some street athletes called them simply FORMULA.Legendary gloves WORKOUT F1.
These were the first specialized gloves for practicing on street horizontal bars and parallel bars in general in Russia, and their main task was to protect the hands from calluses without any change in the quality of the grip. To solve this problem, the side of the palm was made of artificial leather - suede, and inside the gloves there were soft tabs in those places where corns most often formed. Very quickly, these gloves gained popularity not only among street workers, but also among yard gymnasts and crossfitters.Then there was HAT
The WORKOUT F1 gloves were good for everyone, but nevertheless, over time, more and more customers began to express the desire that we have the same gloves, but with a greater coefficient of grip between the palm and the horizontal bar. The WORKOUT F1 model was originally developed as a universal model that is equally well suited for performing static exercises, and for training maximums (in pull-ups, push-ups, etc.) and for dynamic flights and everything else. That is why the material most closely imitating the skin was used for the palm, and the adhesion to the surface itself was characterized as neutral.But for many, this neutrality was not very necessary. They did not perform dynamics and did not even make exits by force. They trained statics (including on vertical posts and pipes) and worked on the number of repetitions in pull-ups and parallel bars. And they needed gloves that provide a secure grip. In response to such requests, we have developed:
Universal gloves with a palm made of genuine leather WORKOUT F2.
What if? (DEAD GRIP)
But at the same time, there were those who wanted even more grip with the crossbar. The use of leather as a material for the palm gave increased grip, but at the same time allowed, if necessary, to move the hands a little. We were asked to make such gloves that once grasping the horizontal bar, it was necessary to make considerable efforts to unhook the hand. So the model was born, nicknamed DEAD GRIP:Professional gloves for training on horizontal bars WORKOUT F3.
This time, we used rubber with a special honeycomb placement as the palm material, which further increased the grip of the material on the horizontal bar. The first experiments showed that the grip strength in these gloves increases by 10-20%. That is, if without gloves you could pull yourself up 30 times, then with these gloves you can easily pull yourself up 33-35 times! This result is achieved due to the fact that a large grip force significantly relieves the load on the forearm and grip muscles, thereby allowing you to hang on the horizontal bar for longer.
For its tenacity, this model of gloves received the nickname DEAD GRIP, which very accurately reflects the quality of the clutch. However, this simultaneously became a relative disadvantage of this model, because you could not just pick up and release the horizontal bar from your hands. And if the forces were already not enough, then unlike other models, where you simply slipped down and your hands disengaged, in the F3, the grip force began to tear the rubber coating of the palm. That is why this model is positioned exclusively as a PROFESSIONAL (and professional street athletes across the country from Kaliningrad to Yuzhno-Sakhalinsk have received this model very well) and it is not covered by the buyer's warranty.
These gloves are for those who understand why they are needed. For those who are ready to shell out money for getting an additional result. After all, 10-20% increase from the first use is not a joke.
When the cold comes
Workout culture involves training on street horizontal bars and uneven bars all year round, which means that in the very first winter after the launch of the WORKOUT F1 gloves, we were faced with the fact that when the thermometer dropped below 0, it became quite cool to practice with gloves. And when it dropped to -10, it became very cold.Some found an original solution to this problem by ordering gloves a size or even two sizes larger, and putting them on over some simple fabric gloves (or even regular cotton gloves). It turned out 2 layers, and it became much more comfortable to practice. But we understood that this was only a temporary solution, and something had to be done.
And then we decided to make our gloves warmer by adding insulation inside them.3M THINSULATEwith a density of 70 grams, which would allow you to comfortably practice outdoors for 1-2 hours at temperatures down to -15 -20 degrees.
Since all our models were in a certain demand, we decided to insulate them all at once, so insulated versions were born,, (it was subsequently decided to abandon this model).
A series of insulated WORKOUT Z gloves for training in the cold season!
New glove models have been accepted by the workout community with a bang!
Photo of our customer.
And then came the abnormally hot summer...
When it gets too hot
And when it started to get pretty hot outside, and the temperature even in the shade rose to plus 30 degrees, we realized that it was too hot to train in our usual gloves. And then we had a new interesting idea - to make summer versions of our gloves with an improved ventilation system and cut fingers.We did not have to wait long, and already next season we presented light versions of all our models -(with suede palm)(with leather palm) and(with rubber coated palm).
A series of lightweight gloves for exercising in the heat WORKOUT T.
What does the model WORKOUT T2 turned out so successful that the legendary street athlete Nick Anisimov performed in it at the final freestyle world cup on the horizontal bars, where he took the 2nd place, slightly losing to the winner in the final battle.
Although we are accustomed to call these gloves summer, but very quickly their merits were appreciated by visitors. gyms and fitness clubs, where the temperature is usually quite high and the issue of sweaty palms becomes as relevant as possible. Our gloves have become especially popular with girls, as they perfectly protect their delicate hands from calluses:
Girls love our WORKOUT gloves too!
conclusions
To paraphrase a well-known slogan, we can say that "Different gloves are needed, different gloves are important!". And this is true, because depending on your goals and the conditions in which you train, one or another model of gloves will suit you best. Of course, you can try to find one universal option that would be best suited for all most cases, but in realityour customers very often take several pairs of gloves at once, in order to exercise with maximum comfort and result both in summer and winter, both by training static exercises and performing dynamics.We continue to improve every year the lineup by improving and refining our gloves based on feedback from our customers and the top street athletes we actively interact with. Our the main task- not just to create great workout gloves, but to make the best workout gloves in the world!
And we will not stop until we achieve this result!
Recently, the number of adherents of such a movement as a workout has been increasing. Its supporters specialize in performing exercises on the horizontal bar, videos of which have flooded the Internet in a matter of years. To succeed in this sport, you need to take into account all the points - from improving your fitness and functionality to equipment.
Gloves for the horizontal bar are still unusual, but already quite popular attribute - leather, comfortable and so necessary. They contribute to a better fusion of the arm and the horizontal bar, providing a safe hang, on which a lot sometimes depends. What are sports gloves made of?
Most athletes prefer a product made from genuine leather, which has the smallest holes for excellent wrist ventilation. They are usually cut for comfort. Cotton bar gloves are also produced, which have pimples on one side, which provide better grip.
Do you need terrible, ugly blisters and abrasions that prevent you from working, you do not see prospects for development, although you have devoted years to training? But the one who knows his own worth always achieves his goals, making the most of the natural potential. For workouts, athletes choose high-quality equipment, the basis of which is recognized as gloves for the horizontal bar. They are different, but the choice is huge, and everyone will find suitable ones for themselves. Your hands, along with sports equipment, will become one, and you yourself will be surprised at your new capabilities.
How to choose and buy gloves for the horizontal bar
In order to find the perfect fit for the horizontal bar, you need to make several measurements. To do this, we measure the circle around your working hand (if right-handed, we measure it, if left-handed, then, accordingly, we measure left hand). We also measure the circumference below the joints of the back of the hand and across the palm itself, while thumb we do not freeze. When buying gloves, be guided by these measurements. If the hand size is intermediate, and you are more comfortable when the gloves do not compress your hands, then you should choose larger size. In this case, they will be worn freely. If you like the horizontal bar gloves to fit tightly around your hand, then choose a smaller size. You should also be aware that leather gloves stretch after a while.
Let's sum up some results. Undoubtedly, equipment is sometimes of decisive importance, and great attention must be paid to the choice of gloves for the horizontal bar. First, you should examine the appearance of the product, which should not have any flaws. Secondly, you need to purchase goods in places with a good reputation. Thirdly, and not least, the smell of the equipment should be neutral. If you encounter a fake, it will most likely emit a pungent, unpleasant odor.
A careful choice of equipment is the key to success not only in workout, but also in any other sport.
