Face protection for a snowboarder. Do you need snowboard protection? Useful property of the helmet

How to choose the right snowboard protection skiing. What are the different types of protection? With the help of what technologies it is produced. You will find answers to all these questions in this article. This article will be especially useful for beginners who only dream of their first trip to the mountains. They have seen enough of how professionals perform fascinating tricks and, most likely, dream of repeating them. However, the most important thing to remember about protection, because the risk of injury is very high.

Snowboard protection - choose shorts

A day after trying to learn how to snowboard, what associations does a beginner have? Of course, pain sensation in the soft part of the human body. Often this part of the body gets the most, all the falls fall on it. How to cope with this, if without falling anywhere? Purchase protective snowboard shorts - many refer to them as butt protection. These shorts are made of special materials that soften and distribute impact. And a clear plus will be that it will become warmer in shorts to sit on the snow or on the lift.

Tailbone protector for snowboarders and skiers

There are the following types of protection:

• Made with soft inserts. They are very light, they are completely invisible under clothing. And also it is a very budget option, but it does not protect very well from impact. Soft inserts soften the blow quite a bit.
• Made with hard inserts. This option is already much more expensive than the previous one. In them, even the outer area of ​​the soft elements is covered with hard plastic, this helps to distribute the load from the impact. The plates are located in places vulnerable to falling. Usually, additional plates are protected: the outer part of the thighs, back, coccygeal bones.
• Made with modern materials. The usual hard plastic has been replaced by new elements of their latest materials. They represent a special elastic and soft protective components, when applied to them strong impact- they protect like a solid object. Such protection is usually installed in the most vulnerable places to injury.

The back protector distributes the force of the impact in the event of a fall and prevents back injury. After all, no one wants to earn a fracture of the spine or a severe bruise?

Back protection comes in the following varieties:

• flexible. It is made of plastic plates, they allow you to comfortably bend forward, and, of course, limit the backward deflection of the back.
• Rigid. It is possible to use similar materials as with a soft, but distinctive property is that with the help of metal fasteners of the structure, the freedom of the back will be greatly reduced. This option is very reliable.
• built-in. This type of protection is not the best, because the protection must be tightly and firmly fixed on the back. But a backpack or jacket cannot guarantee this. That is why we advise you to give preference to a non-embedded view.

Choosing a helmet

Without this type of protection, simply nowhere! It should be purchased by everyone involved in this sport. Without a helmet, the risk of serious injury increases, so even the most professional riders wear a helmet at all times.

How to choose the right helmet? What should you pay attention to? Let's find out!

1. You need to choose the right type of ventilation.

Every helmet has ventilation. Without it, the head in the helmet will sweat, and this will increase the risk of getting hypothermia and overheating.

There are the following types of ventilation:

• Active - there are holes in the helmet, they can be opened and closed with a special lever. These helmets are more expensive, but they are much more comfortable.
• Passive - holes are built into such a helmet, but there are no levers. These helmets are cheaper than active ones.

2. Helmet weight.

With a heavy helmet, the chances of earning a neck injury when falling increase. Only these helmets provide better protection of the skull from stones. With a light blow, the probability of damage decreases, and with a dangerous blow, it is unlikely to protect the skull well. You need to choose a helmet depending on what kind of physique you have.

3. "Landing" of the helmet.

A properly fitted helmet fits snugly on the head and does not press. Also, the helmet strap should not hang out, should not create uncomfortable sensations (push). You need to try it on your head, without a hat. However, you can use a balaclava.

4. Purchase a balaclava.

Well suited made of fleece. There is a huge selection of these balaclavas, there are both very warm and for spring. It is warmer with it, and also the helmet will not rub and excess moisture will not get on the head. And the helmet will not smell unpleasant, and it will be very easy to wash. A balaclava is a must.

5. Mask and helmet.

Masks and a helmet are interconnected things. It's easier to choose a helmet, and to him already a mask. The mask should not press and there should be no space between it and the helmet.

Knee pads and elbow pads

Knee protection

Athletes very often damage the cup of the knee or knee ligaments, and to avoid injury, you need to use protection on the knees. This protection is often combined with shin protection.

There are also special options for those who have already injured their knees. They can purchase orthopedic knee pads. However, this is not the most budget option, but is there anything more expensive than health? After all, this protection reduces the load on the knee when skiing.

Elbow protection

Although elbow injuries are far from the most common, you still cannot forget about safety. If you fall on your side, you can easily injure your elbow.

Often people try to cushion the fall with their hands and such attempts lead to injury to the hands and wrists. These injuries are the most common among such athletes.

Many beginners don't consider how important snowboard protection is. Immediately after the first ride, people realize that they didn’t take care of safety in vain, because the broken parts of the body make themselves felt. You should not deprive yourself of the possibility of a comfortable ride in the future, which means that special equipment is also needed.

Do you need snowboard protection?

As in any other injury-prone sport, snowboarding protection is a must. Active winter holidays can be difficult to leave bruises and bumps, from serious injury Nobody is protected either. Uncontrolled descents and falls frighten even professionals and, probably, this is the only reason why they approach equipment more responsibly than beginners. On the mountains, the following parts suffer the most:

• knees;
• pelvic area;
• elbows;
• Hands;
• head.

It follows that snowboard protection is required only for these parts of the body. Some argue that, having put on everything, it becomes inconvenient to move around, but these are just prejudices, and there is practically no self-preservation instinct. As experienced snowboarders say: the smart one first of all buys protective equipment, and only after that, further attributes.

How to choose snowboard protection?

It is believed that the best protection for a snowboard is a comprehensive outfit. All places that can possibly be injured (and more than once) must be protected:

1. The main thing is to protect those parts that are the most mobile, these are the hands and knee joints.
2. The head must be in a helmet, there have been many cases of head injuries and all cases were severe.
3. Coccyx and back, because when falling on these bones, there is a load in the form of the entire mass of a person.

Snowboard Pelvis Protector

Special protection for snowboarding - shorts, which is no less important than a helmet. When you fall from your height, gluteal muscles and the pelvic bones receive a serious load. A person may never hit his head, but he will fall more than a dozen times, and this applies even to experienced athletes. Made of special material, lycra and polyester, the shorts protect not only from blows, but also keep warm.

Secondary polymers perfectly serve as inserts, which are also cushioned in some places. They are soft and hard, but only the second option can completely protect against injuries. They are worn under sweatpants and fit snugly without interfering with coordination of movements. Butt protection for snowboarding is selected individually, taking into account the following criteria:

• age;
• size;
• price;
• rigidity;
• riding skills.

Snowboard back protector

As practice has shown, only experienced people buy this equipment, and this happens because the price for it is noticeably high, and amateurs simply do not want to spend money, because it is possible that this species sport is not to their liking. Professionals drive at high speed and prefer steep slopes and can cause much more damage if they fall. A snowboard backpack with back protection ensures a soft landing at any speed.

Proper coccyx guards for snowboarding are made of plastic or a material that looks a lot like foam. Putting on a vest, a person feels soft and warm, and when falling, it becomes hard and reduces the level of danger. Before buying, a careful fitting is required, because the wrong size can interfere with movement on the board and maintaining balance.

Snowboard - knee protection

Knee pads in this form are considered mandatory. Considering that the snow itself is soft, the number of broken knees, unfortunately, does not become less. The rigid plastic cup is well fixed on a leg and softens blow. It all depends on the manufacturer, someone relies more on safety, others on convenience. Still, there are options that suit both. Knowing how to choose protection for a snowboard, a person will protect himself from many injuries and even fractures.

Snowboard face protection

While driving at high speed in winter time The main thing to protect is the eyes. Masks are sold in a wide variety and are selected individually according to the shape of the face and personal preferences. The snowboard nose guard provides comfortable tracking and a wide field of view. Manufacturers have taken care of a variety of designs that will appeal to men, women and children. The main functions that goggles should perform are:

• do not let in any kind of radiation;
• reduce sunlight;
• do not let in wind, particles of ice and snow;
• prevent injury.

Snowboard Wrist Guard

Now snowboard gloves with protection are sold in any sports shop, but the tradition of teaching the correct fall has not passed to the present time. The instructors tell and show in detail how to take a load on the hands so as not to injure the hands, but special gloves, clearly fixing every movement providing additional security.

Now snowboard gloves are made with two types of wrist protection:

The presence of a helmet will save the snowboarder from head injuries, but high-quality body protection will protect against bruises, fractures and other troubles. Quite in vain, snowboard protection is ignored by many riders. If you like to ride off the popular trails, protective equipment you need. How to choose the right protection for your snowboard? First of all, check it for compliance with the mandatory requirements. It is reliability, convenience and a light weight. Protection should not hinder your movements, cause discomfort, prevent excess weight from doing tricks. At the same time, protection should be as simple as possible and “sit” well on the body. It is best if you have comprehensive protection for the ribs and sternum, back, lumbar protection belt, protective shorts, knee and elbow pads. At a minimum, knee and elbow pads are required.

Buy snowboard protection in Moscow

High-quality protection must withstand collisions with obstacles such as stones, trees, other people. You can buy snowboard protection for the back, knees, elbows and other parts of the body in our BordSklad store. Here you will find a wide range of protective elements of well-known brands: Black Fire, Biont, Burton. Each protective element has passed serious strength tests and is able to protect its owner even from strong blows. It must be remembered that snowboard protection is not an opportunity to show off, but a necessity for those who love extreme sports. If you are new to snowboarding and do not know how to choose the right protection and what elements you need, please contact your store consultants.

They call it a snowboard olympic view sport, which consists in descending from mountains and slopes covered with snow on a snowboard. At first, these competitions were held only in winter, but some extreme sportsmen have learned to descend from sandy slopes in summer (sandboarding).

Very often, athletes ride on unprepared tracks at great speed. That is why they use various equipment to protect themselves from injury - helmets, equipment for arms, legs, joints, backs.

In 1998, in Nagano, during the Olympic competitions, snowboarding was included in the Olympic program for the first time.

Thoughts on protection

Protection for a snowboarder is very important - it is the first thing a wise rider acquires. Going out on the slope for the first time, many people forget about knee pads and helmets. They think that such an amazing event will not be spoiled by anything. After repeated falls, the broken parts of the body begin to hurt in athletes. As a rule, the first thought about equipment appears at this moment.

Those who have already been injured during training begin to think about protection in advance. They don't look back at skillful buddies who ride without a helmet or damage. And rightly so: protection for the snowboarder provides the athlete with the pleasure of riding. Equipped riders do not need to heal bruises.

Protection for the beginner snowboarder

Wondering if tailbone protection is important for snowboarders? When purchasing equipment, many people do not want to spend a lot of money. They don't know if they will like snowboarding, if they have enough money, spirit and time to continue. Therefore, we will now determine the minimum cost of equipment for beginners, taking into account the safety and maximum pleasure received from skiing.

Amateur training is carried out at ultra-low speeds with a huge number of falls from a height of average height. Riders primarily land on the following body parts:

• wrists (instinctively, all athletes fall on their arms extended forward);
• knees (during learning to ride on the front edge);
• buttocks (during learning to ski on the back edge).

Therefore, protection for the snowboarder must protect what is most injured.

knee pads

Knee pads are special knee pads. This equipment, as a rule, consists of a cup made of hard plastic. It is she who takes over the basic striking force. In accordance with the version, the product can be equipped with soft inserts made of foam material, which are placed below, above and on the sides of the knee.

The knee pad is attached in three ways:

• Straps below and above the knee - a budget option. Such a mount is not considered reliable, it can move during a side impact and fail to fulfill its purpose. Suitable for snowboarding enthusiasts riding at a minimum speed.
• Stocking. Here, the elbow is located in the middle of the fabric tube, which is equipped with various inserts. This modification is more reliable than the previous one, but has a very clumsy appearance.
• hybrid way. IN this case the stocking is fastened with straps to the top and bottom of the knee. This is the most expensive and reliable option.

It is necessary to note the magnificent modernization of the rigid knee pads, which are inclusions of elastic raw materials placed between the plastic cup and the knee. It can be foam rubber or other raw materials that soften the blow and take on its power. Some riders use pieces of fluffy polyethylene. After two or three workouts, they split lengthwise due to falls. But landing on them is very pleasant, as they are soft and comfortable.

Knee pads cost from 700 to 2500 rubles and more. Those who are going to try snowboarding for the first time can use equipment for volleyball or rollerblading.

Non-core products are popular due to their thickness. The plumpest volleyball knee pads cost about 300 rubles - this is not the highest price for unbeaten knees.

Wrist guard, shorts

Protection for a snowboarder is necessary to get through the phase of relentless falls. After all, if training is not accompanied by injuries, the athlete learns faster and rides with pleasure.

1. Protective shorts are called special equipment, equipped with inserts from a variety of materials (hard plastic and elastic synthetics). Such equipment protects the lateral surfaces of the thighs and tailbone from injuries, it is comfortable to sit on the lift in it, especially if it is wet. Shorts cost from 1600 to 3500 rubles, depending on the raw materials and the number of protective inserts, the thickness of the protection, the manufacturer and design. Of course, more expensive does not mean better. It is known that Russian enterprises create effective products at an affordable price. Choosing this product, you need to focus on convenience, thickness, quality of seams.
2. Wrist protection consists of one or two plates placed in a case. They are made of plastic or steel and are attached to the hand in the form of a fingerless glove. This protection for snowboarders plays a very important role, as it fixes the hand and prevents it from excessive arching. In fact, this equipment prevents dislocations and fractures. The plates are invisible under the glove and are very comfortable. Their price is small - from 600 rubles, and it is known that efficiency does not depend on cost.

As a result, protection for novice snowboarders costs about 3,000 rubles. If you take some things from friends, it is much cheaper.

Protection for aces

By increasing speed, athletes increase the risk of injury. Of course, they rarely fall, but critically, there are collisions at speed with other snowboarders, and even with skiers. To stay healthy during training, riders stock up on extra gear.

In protection for snowboarding, professionals prefer a helmet. It is known that at low speed it is almost impossible to fall and injure your head. At an impressive speed, it can be smashed thoroughly. A helmet often saves you from trouble. It is made of hard plastic, which is able to absorb all the power of the push and prevent concussion. Most cases prove its real effectiveness.

Helmet neglect

Many snowboarders neglect their helmets and therefore their safety. They say that the product has too much mass, so it is uncomfortable. But when they go to the mountains, they get it anyway, because they don’t want to go to the hospital.

It is known that there are many cheap models of lightweight helmets. For example, the Head version has a mass of only 365 grams, while being very convenient and inexpensive.

Some athletes say they look ugly with a helmet on. Today you can find a product that will create an unforgettable style for the rider. You can choose a helmet to match the color of your eyes, hair, suit... When you are protected, you can move mountains!

Useful property of a helmet

The helmet has another useful feature: it insulates the head in windy and frosty weather. Riders often ask the question: “Can I wear a hat under a helmet?” Many people know that because of it, a helmet can move when it falls.

Of course, you can wear a headgear under protection without losing safety, provided that it sits securely and comfortably on you. The hat also softens the impact when falling, because it is an additional layer. If the helmet worn on it moves, you need to purchase a different size or model.

In stores that sell snowboard protection (helmets, clothes), you can find special balaclavas that look like hats or light balaclavas. Sellers often say that helmets can be adjusted in size. This is not bad, but you should not rely on this nuance, because the product should be comfortable and fit snugly to the head.

Audio system

An audio system can be built into the helmet. Its most important purpose is the riders' dialogues during skiing. They are necessary in order to call for help if necessary and not get lost. Use headphones and a walkie-talkie for this.

Unfortunately, many athletes use this feature for other purposes and build a player into the helmet. Thus, they increase the pleasure received from skiing, but reduce safety: the snowboarder begins to be inattentive to the details of the route, the risk of collision and injury increases.

So how do you choose a helmet? When trying on, it is necessary to pay attention to the size and weight of the product (the helmet should fit snugly against the head, but not squeeze it and not disturb the athlete).

Mask

Snowboard protection is, in fact, sold in any sports store. What is a mask? It protects the eyes and part of the face from snow, head wind and minor mechanical damage. Usually professionals who ride at high speeds need it.

Many people say that the mask is harmful because it reduces the viewing angle. It is wrong to think so. Firstly, this nuance depends on the model of the product. Secondly, the view is narrowed due to snow and air currents entering the eyes, and not due to poor equipment.

Under the helmet, the mask is selected so that there is no gap between the products. For example, the Head helmet is great only with a Scott mask.

Visor

It is known that the visor with which the mask is equipped has a large number of characteristics: contrast, color, light transmission, sharpness, viewing angle, and so on.

There are two types of visors:

1. Spherical. In it, the reflection blurs to a circle with the effect of the “eye of a fish”. Spherical masks provide a wide viewing angle and are considered the best for vision: they do not distort the image, as they form a sphere around the eye. They are expensive.
2. Cylindrical. Here the reflection resembles the outer surface of a cylinder, as it is stretched vertically. This product can be purchased at a low price.

Sellers may recommend mask models equipped with interchangeable visors. In general, it is very difficult to choose a visor for a certain mask model (usually outdated), it is cheaper to purchase a new one. Therefore, it is better to buy a good product the first time, rather than changing visors.

Back protection

What is a snowboarder's back protector? It is used by professionals who ride at high speed. Indeed, on crowded slopes, when performing tricks, you can collide with colleagues and fly several meters.

Back equipment is made in different versions. The simplest, but quite effective, is the placement of several movable plates on the straps and a wide waist belt. It is inexpensive and effective protection. A more expensive example is equipped with plates attached to the back with a thin fabric vest. This equipment is also part of the “turtle”, which protects the chest and arms of the athlete from injury.

Previously, this product was made of hard plastic. Today, lighter raw materials are used, resembling foam. It is very soft, but at the moment of impact it becomes hard. Many riders do not dare to use this option, so they ride in plastic.

Before purchasing, be sure to try on the back protection, it should sit tight and not move under pressure. In general, any product may seem comfortable, but not fit the figure, so you need to look for a comfortable model.

Chest protection

It is impossible to tell everything about snowboard protection, but we will try to make out highlights. In order to go down the mountain on a simple soft snowboard, many wear a chest protector. At high speed, the slightest mistake, a stone on the track, or incorrect weight distribution can cause a rider to fall. To ride a couple of tens of meters by inertia on your own chest is not a pleasant test.

A small addition made in the form of a "turtle" or a protective vest helps the athlete feel safe and confident at any speed and not be afraid of injury.

Technologies and manufacturers

Snowboard protection is made using various technologies. For example, comfortable and soft knee pads become hard at the moment of impact. Technology comes from different areas, a lot has been borrowed from motorcyclists.

When purchasing a product, you can specify the manufacturer's brand: Rossignol, Uvex, Red, Burton. Well-known companies always have expensive products.

In general, it is interesting for everyone to see how any technology works to protect a snowboarder, everyone chooses their own option. Someone prefers brands, someone prefers price. Some do not like Dainese products: they say that this company makes heavy helmets and frivolous knee pads. But this enterprise is the market leader in protection, primarily motorcycle protection. In general, they usually pay attention to how the equipment is made and whether it sits comfortably. It must be remembered that the presence of equipment is much better than its absence.

Protection for snowboarders helps the athlete, when skiing, mentally tune in to a difficult trick or descent. On the website and in Trajectory retail stores, protective equipment is presented by such famous brands as Burton and Dainese, as well as G-Form, Biont, Komperdell and others. You can purchase a complete set of snowboard protection from us - from the top of your head to your toes. The catalog contains men's, women's and universal equipment, as well as protection for children.

Areas of protection and equipment

First of all, beginner riders should take care of the protection of the coccyx, wrists and knees, since these are the points in the learning process that account for the most falls. Therefore, a set of protection for snowboarders of the “beginner” level for skiing looks like this:

• shorts or pants;
• knee pads (in the case of shorts);
• wrist protection for snowboard gloves.

Shorts and pants, among other things, reduce the risk of injury and bruising also from the hips. And, for example, the Biont and DaineseKid models also have pads in the buttocks and lower back.

Looking for protective gear for the pros? A set of snowboard protection will depend, among other things, on the style of skiing. So, for freestyle and jibbing, maximum protection is important. Here you should pay attention to the Dainese jackets, which work on the comprehensive protection of the entire torso. Polypropylene protectors are located in four zones:

• shoulders;
• forearm;
• elbows;
• rib cage

To this are added more rigid plates along the spine and an aluminum honeycomb core.

It is also worth considering the brand's vests and G-Form T-shirts. T-shirts can be used as a base layer. They, due to special shields, allow you to dampen the shock load in the area of ​​​​the shoulders, collarbones, chest and ribs. But to protect the snowboarder from the back, in this case, you need to buy a shell.

For professional athletes it is important to remember the pelvic bones and the coccyx, so back to the pants and shorts. And grabs without risk to the wrists will allow you to make Burton gloves.

It is rare on the Internet where you can find such a choice of snowboard protection as on the Trajectory website. We are always happy to help you find snowboarding gear and equipment. Order snowboard protection online and receive your order in Moscow, St. Petersburg or other Russian cities, as well as in Belarus and Kazakhstan.