How to pump water out of the pool completely. Pumps for pumping water from the pool: useful tips for choosing, installing and repairing. How to drain water from a small pool

Even in the process of planning an artificial reservoir, you need to think about how and where the water will be drained from the pool. The water drainage system is one of the primary tasks that is quite realistic to solve on your own. You just need to know how to properly drain the water from the pool, where it is better to do it and what is needed for this.

Where to drain water from a pool or pond: available options

The organization of the disposal of used water from a pond or pool is a very important task. This can be a real problem if there is no natural reservoirs where the water could be drained. In the case of the closest location near a lake or river, you are unlikely to have questions related to where to drain the used water from an ornamental pond or pool, since such water will not harm the environment. Also, for these purposes, a natural ravine is suitable, along which flood and rain water flows. However, how to drain water from a pond or pool if such benefits of nature are absent?

First of all, remember that draining the water from the pond or pool should not be done daily or monthly.

In there is water exchange: liquid from the bottom or from the surface is taken by a special pump, filtered, heated if necessary and returned back to the pond or pool tank. Such a system frees owners from the constant draining of large volumes of liquid. However, despite this, sometimes it becomes necessary to intentionally drain all the water from the tank.

Water from a pond or pool can also be drained to the site, because it does not have harmful impurities, but this procedure should also be carried out carefully. Since the volumes of liquid are very large, uncontrolled discharge of water into the ground can lead to waterlogging of the soil. Sewerage remains, however, there are some peculiarities here. Water in such volumes can only be received by a centralized sewage system, and in summer cottages it is usually autonomous, and the septic tank is probably not designed for such a volume. It will simply choke, and it will be necessary to immediately pump out the liquid.

It may happen that the microorganisms that are involved in the processing of waste products are washed away, as a result of which the autonomous sewage system will lose its main function. Therefore, the owners of suburban artificial reservoirs, who, after bathing their many guests, decide to drain the water from the pond or pool into an autonomous sewer, will be forced to pay money to sewers for pumping water from overflowing tanks.

Back to index

How to drain water from a large pool?

Constructive solutions for draining and water overflow systems: a - dug-in pool; b - semi-dug pool; 1 - drain pipe; 2 - overflow; 3 - drain valve handle; 4 - connection of the overflow pipe with the drain pipe; 5 - protective nets; 6 - outlet from overflow without forced pumping out; 7 - to the pumping pump.

If it becomes necessary to drain water from a large pond, pool or other artificial reservoir, then this procedure must be approached very seriously: in order to protect the reservoir from stagnation of dirty water, and the territory from swamping, it is necessary to provide an autonomous drain. drain water from the pond. But then the drain should not be massive and emergency, when the entire volume of water is sent to the septic tank, but measured so that the system can cope with such an amount.

Don't forget one more thing important factor: the pond must be connected to the sewer through some kind of jet interruption device. To do this, it is necessary to make a well or pit so that bacteria and sewage from the sewer system do not penetrate into the pond bowl. To avoid overloading the system, water must be drained into the last stage of the septic tank.

To drain the liquid into the ground, technical schemes are needed that will allow the water to go into the ground, and not form a swamp. To do this, you can use the filtration fields, which are usually used if a local sewage system is installed on the site. If there is a storm sewer, water from the pond can be drained into it. In addition to all of the above, some have drainage wells on their land plots. With normal volumes of water, the drain can be performed in the drainage system.

Many summer residents and gardeners may have a completely understandable question: why uselessly transfer normal water in a hot summer? In any case, the crop on the site needs to be constantly watered, so why not use water from the pool for this? Experts do not advise using such water if some chemicals were used during the operation of the reservoir, albeit in small quantities.

Back to index

When to drain the water from the pool or pond?

It is also necessary to decide on the frequency of draining water from a pond or pool. Such an operation should be carried out at least after the end of the swimming season. However, many professionals do not quite agree with this point of view. They believe that draining the liquid on winter time do not need to be done, as this procedure may adversely affect the design of the pool. As you know from the school physics course, frozen water increases in volume. Following this rule, you can come to the following conclusion: the water contained in the ground, freezing and becoming ice, will put pressure on the bowl, and from this even the most durable concrete can easily crack, as a result of which all your work will turn out to be just a waste of time. and strength. Relying on the experience of operating open artificial reservoirs in harsh Russian climatic conditions, it is not always correct to drain water from the pond in the winter, because. soil movements can cause deformation of the pool bowl.

Installation of a shutter for a drain device: 1 - pipe neck; 2 - the bottom of the pool; 3 - grid; 4 - ball; 5 - wire ear; 6 - tripod; 7 - cable.

There are several different points of view on this issue. Some experts recommend completely draining the water, cleaning the tank, plugging the pipes, and then half filling the tank with water. Others are of the opinion that the tank must be left 50% full so that the frozen liquid compensates for the pressure of the bowl with freezing soil. Another opinion says that water can not be drained for several years if you constantly clean the container and monitor its sanitary condition. In their opinion, water can not be changed for about 3 years, if the equipment for water purification and disinfection is properly selected. Modern systems water treatment systems are able to automatically maintain a certain level of purity and the required temperature.

A lot of problems can be brought by poorly arranged waterproofing of the reservoir bowl. Due to the fact that the container has a large volume, which means that the volume of liquid will also not be small, the water begins to exert pressure on the walls in order to find at least some gap where it could leak. High-quality waterproofing will be able to cope with this pressure, and if it is not done in good faith, then water will pass into the soil, which will result in waterlogging of the site. In addition, poor-quality waterproofing can lead to other unpleasant consequences in the form of undermining the foundation of a house and other outbuildings. The purity of the water in the pond depends on the quality of the waterproofing. The penetration of groundwater also leads to pollution of the reservoir, so you will immediately lose any desire to splash in such a pond. For the drain device, you will need the following tools and materials:

tiler's trowel;
shovel;
sand;
brick;
asbestos plate 5-10 mm or metal 2-3 mm;
cement brand 500.

30.07.2009, 10:24

Volodya Volodya

30.07.2009, 11:16

Help with advice - I bought a large inflatable pool, I thought that I could drain the water either with an ordinary hose or a deep electric. well pump and miscalculated. Through a hose connected to the drain hole of the pool (the hose is long, 7 meters), the water does not want to leave at all (I don’t know what’s the matter, maybe there is not enough water pressure), and the deep pump turned out to be stationary and cannot be transferred to the pool. How to drain water from the pool with improvised means? Do not offer buckets, I don’t drag so much water to the ditch in a week :)) It’s difficult to buy a pump now, the purchase has ended, I haven’t seen such pumps without a pool in stores.
Can I buy a wider hose?:009:

Have you ever seen how they drain gasoline?
If not, here's a short guide for you :)
Take the hose, lower one end into the pool, throw the other on the ground, preferably below the pool, but before you throw it on the ground, draw water into the hose with your mouth (like from a glass of lemonade), and then throw :)

30.07.2009, 19:15

30.07.2009, 19:22

We drain the pool as Volodya Volodya suggested, during the night all the water leaves
what's the fun????

30.07.2009, 19:47

And if you drain the old driver's way, I recommend not to suck in air with your mouth (you need to suck in a lot), but fill the hose with water through a funnel.
Or just gradually lower the hose with one end into the pool, allowing air to escape from the other end. When the hose is all in water, plug one end of it with your finger (the second should be under water all the time), pull it out and drag it to the drain point. There, lower the hose to the ground and open the hole. The water will flow by itself.

01.08.2009, 10:28

Take the hose, lower one end into the pool, throw the other on the ground, preferably below the pool, but before you throw it on the ground, draw water into the hose with your mouth (like from a glass of lemonade), and then throw :)

Deal with the drain hole of the pool. Maybe it is closed from the inside with a cork? If you just open the drain hole, does water come out?

01.08.2009, 10:51

Thanks for the advice! :flower: They told me that there could really be problems in the pressure in the hose (there are holes and therefore the water is not "drawn in").
I can’t lower the hose into the pool, because. the pool is located 50 meters from the ditch and there will be no sense in letting go due to the large length of the hose. The drain hole works great, if you open it - the water gushes :)), but when you connect the hose (I made a mistake here with the indication of the footage, there are 15 meters and I attach another 30 m :))), the water does not flow. I bought a new large-diameter 15 m hose today, I'll try to insert it tightly and see what happens. If the water comes out, then I will attach it to another hose and try to drain it. At least, if it works in the new one, then I will know that the reason for the previous failures is in the micro-punctures of the old hose. Well, if not, I'll come back here for further reflection: 009:

When the hose is connected to the drain hole, tightness and micro-holes in the hose do not matter, because. V this case The hose does not work for suction, but for forcing. Through micro-punctures, water would simply ooze out of the hose, but the main part of the water would reach the end.
Perhaps the problem is elsewhere. At such a large distance - 50 m - the far end of the hose may be above the water level in the pool (or somewhere in the middle, on some bump, it rises above the water level). In this case, of course, the water will not flow by itself ...

The tightness of the hose would matter if it was thrown over the edge of the pool, or if the water was pumped out using an external pump.

02.08.2009, 20:06

06.08.2009, 01:00

And why not buy an ordinary inexpensive submersible pump - it costs about the same as the hose you bought? About 1000 rubles. We attached a hose to it, a pump to the pool, an extension cord to the outlet. I personally merge like this) Or are there problems with electricity?

No, there are no electrical problems. But I didn’t see submersible pumps in the store, I ran through several, I saw 3000-5000 each, I didn’t raise my hand for 1 time to buy :)).

Problem solved! I connected a new hose, sealed everything hermetically, fumbled for an hour, but the water still did not go. Then, out of anger, she pulled the hose hard and oh! joy! water flowed: 080: What and why - I don’t know, don’t ask, but in a state of rigid stretching of the hose, the water slowly merged into the ditch. True, the pleasantness was not without a fly in the ointment ... in parallel with the drain, she turned on the pump to draw water into the bucket, and then forgot about it. I remembered only at three in the morning: 001:. By the effect of forgetfulness - I could just open the lid of the pool and drain the water to the ground, I think there would be less water :))

06.08.2009, 11:12

So, these were the so-called "air jams". When the hose is not level on the ground, i.e. some sections of the hose are higher than others, there is not enough water pressure to force air bubbles through the hose.
By straightening the hose, you allowed the bubbles to come out of the hose and the water flowed out.

If you have already installed the pool and use it with might and main, then you probably thought about how to properly store it after the summer season. Someone stops swimming after a short vacation, others rest in the country all summer, and someone is not afraid of the cold and agrees to take a dip in early autumn. You may even have heard stories about not taking anything apart at all and leaving it on the lot until next year. Is it so? Let's figure it out together.

First, let's clarify the question: Is it possible to leave water in the Intex pool for the winter? The answer is no, unless you want to repair the bowl next year. Our customers have done a similar experiment more than once, literally freezing a full font until next summer, and sometimes this experience was really successful, but in most cases people encountered various kinds of problems. The most insignificant inconvenience is the long thawing in the spring. Imagine a block of ice weighing several tons (and Intex has models with a larger volume) - even with a warm spring, it will melt for more than a day or two, and the resulting water will still have to be poured out and replaced - its quality will be unsuitable for bathing. But the main danger in cold weather is the risk of damage to the bowl made of PVC material, not intended for low temperatures. In the cold, it hardens and can easily break or crack, especially in the folds near the bottom. Remember - the liquid expands when it freezes, so the ice formed in the folds can easily damage the bottom and walls; We highly recommend not to additionally verify this on your own experience. Restrictions do not apply to frame racks - they can be kept in almost any conditions (the metal is resistant to corrosion and low temperatures).

We clean the pool for storage - step by step instructions.

1. Drain the water from the pool.

So, at the end of summer, it is better to remove the font. The first question on the agenda: you need to pour the contents. Depending on the size, it can splash from several hundred liters to tens of tons inside, and this is a fairly decent volume. There are two main ways to drain using different devices:

2. Wash and dry the bowl.

Having poured out the water, we proceed to the second stage. If you are the owner of a frame, then there will be no difficulties - by default it is in a straightened state on the racks. It can be easily washed and will air dry on its own. And if you have an Easy Set with an upper inflatable ring installed, then you probably noticed that without water inside, its bowl does not hold its shape and simply falls down. It is better to wash such models before draining in a filled state in order to clean off plaque from the walls and bottom. The Intex range includes straight and curved brushes with retractable holders, as well as ready-made convenient cleaning kits - they are ideal not only for maintaining cleanliness during the summer season, but also for preparing for seasonal storage. After draining, Easy Set should be dried by spreading it in the sun. You can use improvised means and build improvised spacers and hang material on them - it will dry faster. If you plan on drying on spacers, be careful not to puncture or tear the vinyl in the process.

3. Storage conditions.

And the last stage - we figure out how to store the pool in winter. The bowl should be handled carefully - carefully folded, sprinkled with talc (talc is used so that the rubberized material does not stick together), and be sure to store in a dry, warm room, preventing freezing. Temperature restrictions do not apply to the frame and components - sand pumps or chlorine generators can safely stand all winter in an unheated garage. It is the same with moisture protection - there will be no problems with storing the frame in a humid room in winter, but if you want to maximize the life of all parts - of course, it is better to find a dry place for all spare parts.

We hope the article helped you decide how to properly prepare all the components for seasonal storage. If you have any questions - call or write to us and the consultants of the store will answer them in detail.!

Some owners of country estates, when designing and building summer pools there, completely lose sight of the issue of draining water - where and how to drain it? Sometimes this issue is postponed by them for later and is not considered important, although it can be resolved already in the process of using the pool.

Do I need to drain the water from the pool and when is the best time to do it?
- The answer is yes! Why?
- The answer is no! Why?
- Compromise option
How to drain water from an inflatable pool?
Draining water from frame pool
- How to drain the water from the Intex frame pool?
How to drain water from a stationary pool?
- Tools and materials
- Arrangement of water drain
- pit cover
Where to drain the water from the pool?
- Down the drain
- Drainage of water on the beds
- Drain into a septic tank
- Drainage into reservoirs

Do I need to drain the water from the pool and when is the best time to do it?

Some pool owners naively rely on a water filtration system, thinking that they can do without a drain at all. But there are circumstances when it is necessary to drain the water from the children's pool:

the water bloomed or became cloudy;
before the onset of cold weather;
the water has an unpleasant smell;
entry into the water of the corpse of an animal or substances harmful to humans.

The answer is yes! Why?

If the obvious reasons described above are not yet observed, is it necessary in such cases to drain the water from the frame pool? Obviously, yes, for example, at the end of the swimming season. This seems logical, since there is no longer a need for water, and it seems pointless and tedious to continue cleaning the bowl of fallen leaves, acorns or cones without counting on a subsequent bath. In addition, since mid-autumn, the dacha is becoming less and less frequented, and water frozen in winter is quite capable of breaking the very bowl of the pool.

The answer is no! Why?

True, there is also a directly opposite point of view, adhering to the fact that even for the winter it is not necessary to completely drain the water from the frame pool. Supporters of this theory substantiate their point of view by the fact that groundwater near the surface freezes in winter and begins to strongly compress the bowl of a pool deepened into the ground. When it is left filled with water, it, also freezing, compensates for the ground pressure with a counter force and allows you to keep the pool structure intact.

Both of these opinions are quite justified, but then the question of draining water from the pool for the winter rests on the nature of the soil around the pool.

Compromise option

There is another, compromise point of view, according to which half of the usual volume of water should be left in the bowl for the winter, and not fight over how to drain the remaining water.

If there is good specialized equipment for maintaining pools, then you can change the water in them completely every two to three years.

Since during the operation of filters and heaters, as well as natural evaporation from the water surface, its amount gradually evaporates, it is periodically necessary to add to the pool clean water. About 3% of the water volume is lost per week. Thanks to this, there is a natural slow renewal of water, which can please the owners for longer with cleanliness and freshness.

How to drain water from an inflatable pool?

And yet, if you have an inflatable pool, then draining the water from it is not a difficult task at all, and you won’t worry about its safety if you drain all the water in time and put the pool in storage in a dry room.

Video on how to drain water from an inflatable pool:

Video about an alternative way to drain water from an inflatable pool:

Draining water from the frame pool

Most often, the owners of such "fonts" begin to think about how to drain the rest of the water from the frame pool only at the moment when it needs to be disassembled for transportation or long-term storage. But not only in this case, it may be necessary to drain the water. In summer or autumn, torrential or prolonged rains occur, filling the pool bowl. In such cases, if you do not figure out how to quickly drain the water from the pool, it may overflow and the excess water pressure will damage the structure.

In standard designs, drain holes are located on both sides of the bowl. You can choose a solution on how to drain the water from the pool through a hose:

First you need to study local laws regarding the disposal of used water.
Then you need to connect a garden hose to the most convenient of the drain holes and check if the drain plug is correctly installed with inside bowls.
From the drain valve located on the upper side of the structure, you need to remove the cover and connect the end of the garden hose to a special adapter (sold in hardware stores).
The other end of the hose is placed in a valid water inlet.
Next, the adapter must be connected to the drain valve.
After attaching the adapter, a drain plug will open on the inside of the bowl, after which it will be possible to quickly drain the water from the frame pool.
After draining the water, the hose must be disconnected from the adapter, insert a plug into the drain valve.
Replace the lid on the drain valve on the outside of the bowl.
All air must be completely bled from the inflatable ring and all plugs removed.

After it was possible to quickly drain the water from the inflatable pool and before folding the structure and sending it to the barn or garage for the winter, the remaining moisture must be absorbed by sprinkling the structure with talcum powder. All valves and plugs must be removed from the pool, carefully rolled up and removed until the next season.

By the way, about the water in the pool. It is better to add as few chemicals as possible to it - both the skin of bathers and the environment after draining the water will suffer from them.

Video on how to drain water from a frame pool:

How to drain the water from the Intex frame pool?

To know how to drain water from the intex frame pool, you need to consider that they have two drain holes. Water can be drained using the water drain adapter:

First, the hose must be connected to the adapter.
After that, connect it to the drain hole on the outside of the bowl.
The adapter will slightly open the valve and the water will immediately begin to drain.

In bestway frame pools, water is drained according to the same principle. But in some of them, the drain neck is located too high, so all the water cannot be completely drained immediately. In order to find a solution in this case, how to drain the water from the bottom of the pool, you will need to remove several racks from the frame.

Video on how to drain the water from the Intex pool before wintering:

How to drain water from a stationary pool?

Even at the planning stage of a stationary pool, you should think about how to drain the water from the pool. The water drainage system is one of the primary tasks that can be solved on your own.

Tools and materials

To work you will need the following:

shovel and tiler's trowel;
brick;
sand;
cement ("grade 500");
metal plate 2-3 mm or asbestos 5-10 mm, depending on the area of the drain pit. For example, for a pool measuring 2x4x1.5 m, the area of the recess for draining is 50x50 cm and the depth is 50 cm.

It is important to note that big size the pit implies a large free area, but the volume of water discharge per drain will also increase.

Arrangement of water drain

First you need to dig a pit of the required size, adding the width of the brick on all sides of the recess. Brickwork will help strengthen the walls.
The first layer is laid with a gap of 30 mm. The second is done so that the upper level covers the gap between the bricks of the lower layer. For laying, a solution of cement with sand is used, a ratio of 1: 3 - this is how the walls of the lattice are obtained. Through them, water will be absorbed into the ground.
Sprinkle the top with earth so that, when digging the soil, do not touch the top cover of the pit.

pit cover

In a pre-prepared plate, you need to make two holes with a diameter of 50 mm. Pipes are placed in them. One for the air outlet, the other for the hose to drain the water.

The air outlet pipe must be above the plane of the earth embankment.

A plastic pipe with a diameter of 50 mm is suitable for air outlet. The pipe must be attached to the plate.
The second pipe must pass through the hole in the pit cover.
With the help of bent corners, the pipes are attached to the plate. She will cover the pit before backfilling. The mass of the earth will put pressure on the plate, and the prepared corners are needed to strengthen it. They should be placed on the top layer of bricks under the plate at a distance of 200 mm.
The final stage is the laying of the plate with pipes.
From above, everything is covered with earth.

Pipes should not move when backfilled - if necessary, they should be corrected.

It remains only to tamp the earth and fill the rest of the pit.

That's it. Now you do not have to worry about how to drain the water from the pool - you just need to connect the hose to drain the water. Drain the water until the pit is completely filled, then a 30-minute break, then repeat the operation. You need to do this until all the water leaves the pool.

Where to drain the water from the pool?

Down the drain

The simplest answer to the question of where to drain the water from the pool in the country will be its further disposal through the sewer. If there is good sewerage on the site, it will not be a problem to equip not only a stationary pool inside a residential building, but also a small frame or inflatable pool on the territory of the adjacent site.

If there is a branch of the sewer system not far from the pool, then it is enough just to pull the pipe to it from the pool and supply it with a valve. But if the sewer has a waste tank limited in volume, then connecting to it may be imprudent.

In any case, the volume of the pool bowl must be less than the volume of the receiver free from drains, in addition, during the draining process, it is necessary to ensure that the level of drains in the receiver does not exceed the upper allowable mark.

To connect to the sewer in the pool itself, you need to connect the drain to it, lay the pipes, observing a uniform and sufficient slope.

The larger the diameter of the pipe and the shorter the distance to the sewer, the faster the water will drain.

In this case, the cost of draining consists only of the costs of buying and laying pipes, therefore it is also more profitable if the sewer is located closer. If the drain is carried out into the drain pit, then you will still have to pay for the work of the sewers, although this is not very expensive.

Drainage of water on the beds

Often the question of how to drain water from an inflatable pool, especially in cases where it is small or for children, is decided in favor of watering the garden or vegetable garden. The solution to this problem becomes easier if the bowl is located next to drainage ditches, pits, or on a hillock.

If you connect a simple watering hose to the drain hole of the pool and stretch it to the place of irrigation, avoiding its kinks and tangles, then all that remains is to open the valve and at the same time "kill two birds with one stone": drain the pool and water the plantings. This option is optimal.

This process can be upgraded by adding a pump that is not too powerful, which will create the necessary pressure, convenient for watering some crops.

But at the same time, it must be remembered that if the water in the pool has been treated with chemicals, then for plants it may turn out to be evil, not good.

Therefore, if it is immediately supposed to use water from the pool for irrigation, then for it you need to choose such a “chemistry” that would have a mark on the package about its harmlessness to fauna and flora.

Drain into a septic tank

Experts strongly oppose draining water from garden pools into cesspools and septic tanks. The fact is that in almost one such procedure their volume can be completely filled.

A much better option is when the drain is carried out in a specially dug hole for water drainage, located below the pool itself and reaching the level of the gravel-sand soil layer. In this case, the water from the pit will leave much faster. If this pit serves only the pool, then with its help it is possible to completely solve the problem of utilizing water from its bowl.

Drainage into reservoirs

Such a drain is the easiest and cheapest to organize, however, such a solution can often conflict with the law and ethical standards of the pool owner, if he considers himself a civilized person.

Draining into a nearby natural or artificial body of water is permitted only when the water in the pool has not been stuffed big amount chemicals, which often happens when cleaning the pool or using the pool for spa treatments, including fragrances, salts, softeners, etc.

And how did you solve the problem with draining water from the pool? Where and how do you drain water? Share your experience in the comments - your answer will definitely help others.

When faced with the problem of removing residual water from the frame pool in the country (the drain hole is high and some of the water remains at the bottom),

then once scooping it out with improvised means was enough to decide on the purchase of a drainage pump. Moreover, I am building a pond with a waterfall at my summer cottage, and it can be useful to me in the future also for supplying water to the top of the waterfall. I chose the DN 110/6 model.

I was satisfied with the power (200 W), which allows pumping up to 110 liters per minute, and the price of this device. The maximum immersion depth of the pump is no more than 8 meters, which also suits me (my future pond will be more modest in size), and a pressure of 6 meters will allow water to be supplied to the top of the waterfall. So, with this purchase, I immediately killed two birds with one stone. The pump is equipped with a float switch,

which automatically turns the pump on and off depending on the water level, so to pump out the remaining water from the pool, it had to be fixed at the top of the handle and manually control the end of the pumping process so as not to overheat and burn the engine.

The design of the pump is simple and therefore reliable.

It consists of a pump part and an electric motor. At the bottom of the pump section there are suction ports for mechanical water purification,

and a special heat exchange chamber provides cooling of the electric motor, which allows the pump to operate incompletely immersed in water for a long time. That is, it is ideal for pumping water from a pool, and the allowable particle size of 5 mm allows it to be used in a pond. The material of the pump body is made of plastic, which greatly facilitates its weight (only 3.92 kg). The branch pipe allows you to attach hoses of various diameters to it.