Catching pike on a popper in autumn. Autumn pike fishing on a popper. What is a popper

Catching a predator on a popper has been successfully used for about eighty years. And don’t be too embarrassed by the sad fact that you have only recently been familiar with this type of bait – the Soviet era, unfortunately, constantly hid the useful achievements of the West from us. It would be nice if, at the same time, the authorities would at least try to copy the design and implement it with us, but alas. The troubled Soviet times are over and now you will not surprise anyone with a popper. What is it and how good is catching pike on a popper - let's get to know about it today.

What is a popper

To date, even the authoritative Wikipedia does not give the designation of this bait. If you start searching in it by typing the word "popper" into the search field, then you will only be shown celebrities with a similar-sounding last name. Even the bearers of such a surname are few: from an Israeli terrorist who killed seven innocent people, to a Romanian adventurer who mercilessly takes away the gold reserves of Argentina.

Then let's turn to English language. The word "Pop" literally translates as "clap" or "clap". And in combination with the preposition "per" we get literally "squishing" or "clapping". This name is not accidental, because this is the highlight of the bait - to make a characteristic gurgling-clapping sound - and lures the pike.

Back in the last century, someone James Haddon noticed that fish actively attack any moving object on the surface of the water. Actually, let's be objective - many have noticed this much earlier. It's just that Haddon was much more enterprising than the others and quickly set up the production of a new bait. The engineers hired by him were given the task of deciding on a material that would not sink on the water, and to ensure that the bait would make a sound. If everything is clear with the floating material and it would be logical to look in the direction of wood in the first place, then we had to experiment with sound. The way out was found by chance: during the diving competition, one of the developers noticed that if an athlete fails to enter the pool, the sound is louder than usual. By cutting off the tip of the bait and placing the tackle perpendicular to the cut in relation to the surface of the water, it was possible to achieve a light sound. Further, there will be improvements that do not end today: the cut is made with a recess inside the bait, the edges are left smooth or rounded - such experiments make it possible to achieve different sounding sounds. And there are also hollow poppers, the inside of which is filled with small balls. When wiring, they create additional noise that attracts the owner of the reservoir.

Now let's look at the bait through the eyes of a pike. Here the popper is thrown and makes a rather loud sound when it lands. This already attracts the predator and she goes to the place where the popper fell. Or they remain in their place - here it is already difficult to predict its intention. Moving through the water, the popper leaves a trail behind it, and the pike itself can see it perfectly. And the additional sound coming out at the same time enhances the desire of the pike to grab the bait and allows you to quickly determine its location. In other words, the picture and sound that the pike sees and hears make the toothy one curious - what is it and if I can grab this “something”.

Traditionally, a popper is made in the form of a fish, does not have additional blades, the number of hooks varies from one to three, and the weight of the bait is usually light. For example, we know the heaviest model is 26 grams, and the lightest is 2.4 grams. The length is also different, but for pike fishing it would be better to use a size from 30 to 150 millimeters (depending on what size predator you are fishing for).

Also, pike poppers can be conditionally divided into three categories, based on additional improvements.

The first group is composite poppers. Typically, such baits consist of two movably interconnected parts. Thanks to this design, the popper bends more smoothly when retrieving, and thus looks more natural in the eyes of the pike. However, this can be argued if we compare the performance when fishing on a composite and solid wobbler of this type.

The second group is poppers equipped with additional plumage. Such models are most often used in the cold period of the year, when due to the plumage a smoother bait run is achieved.

The third group is a lure with a phosphorus color. As a rule, phosphorus is applied only to places where the location of the eyes of a fry is imitated.

Catching pike on a popper is possible with all types of this bait, but we have not mentioned one nuance yet - this is the color. Today on sale you can find a wide variety of color options. These are yellow, and brown, and with red stripes, and green - the choice is simply huge. When choosing a bait for yourself, do not neglect the color of the paint. From the height of our own experience, we say that we personally prefer the natural color that imitates the fry that lives in the place of pike fishing.

Popper Benefits and Efficiency

Catching pike on a popper is one of the options with which you can catch fish. We will not assure that this is the best choice among all lures, because each of them is designed for specific fishing conditions and has its own unique advantages. Popper is also not without strengths:

Perhaps the most important advantage of the popper is that it is a surface bait. Therefore, pike can be caught where a wobbler or spinner is powerless. Dense thickets of algae or reeds (if it does not protrude above the surface of the water) are just the places where the use of a popper is most appropriate and effective.
Catching pike on a popper sometimes ends up with a fisherman's trophy of a different kind: chub, perch, pike perch and even carp respond well to such a bait. But if we have already started talking about these types of fish, then we must admit: pike perch and perch can certainly be caught, chub - a 50/50 probability, and for carp, the popper will have to be improved or made independently.
The excitement of what you see when catching pike on a popper is impossible to put into words: using this bait, you will see the attack of a pike with your own eyes and it is worth a lot. There are just no cases: either a pike jumps out of the water, for a moment allowing itself to be seen in all its glory and at its full length, or a fisherman sees an approaching torpedo from afar - you can’t say otherwise in such cases, then the pike’s mouth will appear, exposing its sharp teeth and even this is worth seeing at least once.

Catching pike on a popper: how to choose tackle

rod . It is desirable to choose so that it is convenient to make twitching. The test is desirable up to 14 grams, the length of 2.30 meters is recognized as optimal.

Coil . The main requirement is the uniformity of winding, since the line is laid behind the wire either under the influence of a load, or without it.

fishing line . Do not forget that you often have to catch in the grass, which means that the breaking force must be taken into account. We pay attention to the stretching of the fishing line - it should not be.

Leash . Mandatory, since the pike often misses and it is quite likely that the line is captured by the predator's mouth. Best recommended leashes made of steel strings.

Catching pike on a popper will be the most successful if you listen to the recommendations below. We cannot guarantee a 100% catch, but the fact that each of our tips is confirmed by practice is true.

Catching on a popper is an imitation of a fry jumping out of the water. Therefore, it is better to apply bait when such a phenomenon is observed. This is often seen on the water and when the moment comes, you can quickly change the bait to the popper. In any case, the predator will be less afraid of the sound, as is often the case with small pikes in the pond.
If you meet a tree on the shore of a reservoir, the fruits of which fall into the water - do not miss your chance to try the popper. A remarkable case: once we met a mulberry growing near the shore. At every gust of wind, fruits fell into the water and a myriad of fry "grazed" in this place. It was noticed that the fry periodically appears: here he is trying to taste the mulberry, but he is not visible for a couple of minutes. I had a hunch: maybe it's the pike that scares the fish? Already the second casting of the popper brought results. It was also important to cast the bait just at the moment of calm, because, in theory, at that time pike were swimming under the shore, since there were no fry.
The color of the popper plays a role when pike fishing occurs closer to the dark time of the day. Then it is better to use bright colors. With regards to phosphor dots or lines, we personally did not notice much progress when using such options. In principle, you rarely see such poppers even on sale, which already indicates their poor effectiveness.
The number of hooks, as already mentioned, varies from one to three. What quantity to give preference to is up to you. Just do not forget that if you use a popper, then even one tee will cling to algae, and what can we say about three tees.
If you look at the cost, you can notice the difference and often it is colossal. We agree that Shchukolov already has to spend a lot of money to fully satisfy his fishing needs. But don't forget that cheap bait can bring more frustration than a catch. For example, Chinese fakes (you can’t say otherwise) get tangled with tees or do not always produce a sound of high quality for a pike. It is better to buy a couple of expensive, but certainly proven branded baits, than a dozen and a half outright nonsense.
Pike sometimes “allows” itself to miss, and if this happens, then it is better to perform the next cast in the wrong place, but a few meters further. A loud fall of the bait can frighten off the pike, and just the passage of the popper over it is the right decision.
Infrequently, but there are such cases that the predator ignores fear, its caution becomes dull and catching pike on the popper allows for a short time get a rich catch. Usually this happens during the spring and autumn zhora toothy in shallow water. During such periods, just do not forget to take the popper with you for fishing - you can expect stunning and very gambling fishing.

Conclusions and video about catching pike on a popper

On fishing forums, there are often annoying messages about the first unsuccessful experience with this bait and complete failure from her in the future. What to do, such fishermen are not uncommon - they give up at the first failure. But there are those who take a popper with them for every fishing trip, except for ice fishing, and always have in their arsenal a lot of exciting stories about fishing with a floating wobbler. So do not be discouraged and do not despair - you need to try, improve, and then the work will be generously rewarded.

The traditional video, which we will supplement the article with, will tell you about the fishing technique in a very high quality and demonstrate that the pike attacks the bait no less than other varieties of wobblers. After watching such a video, you just want to drop all the pressing matters and plunge into the world of silence and excitement.

Pike on a popper is an exciting, emotional, gambling activity. All bites of a toothy beast are visible visually, which leaves an unforgettable impression of the fishing process. Pike fishing on a popper is popular among modern spinning enthusiasts and is used in diverse reservoirs where this predatory representative of the ichthyofauna is found.

Catching pike on a spinning popper is a specialized area of fishing. Successful fishing on this type of artificial bait is possible if the following favorable factors are present:

The right time of year and the right weather.
Shallow areas with aquatic vegetation.
The presence of an active pike, ready to attack a moving bait.
Properly selected gear and a set of poppers to encourage the predator to grip.

Below we will consider each criterion to help novice spinners figure out how to properly catch pike on a popper.

What is a popper?

Popper is a bladeless solid volumetric bait designed for fishing in the upper layers of the water. In fact, this is a wobbler, which has a notch in the nose of the body instead of a shoulder blade. When wiring, it makes a gurgling sound and creates splashes. This behavior of an artificial object attracts predatory fish located in the surface horizon or in the water column.

The popper is made of plastic, some models are made of balsa. Inside, this surface bait is loaded, which gives it certain flight performance and characteristic movements during wiring. Topwater can be located in the water almost vertically or horizontally. It all depends on the balancing system placed in the cavities and channels of his body.

In terms of buoyancy, a pike popper can be sinking or floating. The first type is relevant for high-speed exploration of an unfamiliar water area, when you need to quickly find the parking of an active pike. The second one is more suitable for spot catching specific areas or promising areas, if you want to induce a predator standing in ambush to grab.

Today, surface baits of this type are made by almost all manufacturers of wobblers. Catching models are available in the assortment of the famous advanced Japanese concerns Megabas, Jackal, Zipbates and others. Among the inexpensive topwaters, one can note Kosadaka poppers for pike, Salmo, Aiko and others.

Which popper to choose for pike fishing?

Not every topwater in this category is suitable for spotted predator hunting. What is the best popper for pike? What to look for when choosing it? The main thing is the length of the lure. Toothy beast will not rush to too small or large object. Optimal size popper per pike is 8-12 cm.

Surface bait with a length in the specified range will be the most catchy. She is able to seduce a pike from half a kilogram to three or four kilograms. Topwaters bigger size designed for trophy fish. However, in modern realities, it is extremely rare to find such a specimen in a shallow area.

Lures less than 8 cm long often tempt frankly small pike, as well as striped robber. Such topwaters are used in ultralight spinning and light. They are no longer considered specialized, they are universal and are classified as poppers for pike and perch.

The color of the surface bait has little effect on the result of fishing. The pike sees an object against the sky, so any topwater in the eyes of a predator has a dark color. Catchable poppers for pike should have a shade that is noticeable to the angler, be visible from a long distance, not get lost among the glare on the water and among the waves.

Pike popper should be equipped with powerful and sharp tees. The toothy predator is a strong and aggressive opponent, which, once on the hook, strongly resists, tries by any means to free itself and leave the fisherman with nothing. Bad triple hooks cannot withstand the onslaught of a weighty fish, so it comes off such baits quite often. Experienced spinners always change low-quality tees for products from well-known fishing manufacturers.

Seasoned anglers are able to make a pike popper with their own hands from improvised materials. In capable hands homemade lures they turn out no worse than factory products and can be used in diverse conditions when fishing for spotted beasts.

When does the popper work?

All surface baits are intended for fishing in conditions when the predator hunts in the upper layers of the water. This behavior of fish is observed only in the warm season. In summer, many shallow areas are overgrown with algae. This attracts medium-sized roach, rudd, perch and other peaceful underwater inhabitants. Here they find food and shelter from various dangers. A pike follows the fry. Among aquatic vegetation, it is convenient for her to disguise herself and attack gaping prey. Therefore, a popper for pike in the summer is a competent, reasonable and correct choice. You can look at the calendar for pike.

Pike fishing with a popper in the summer is the most productive way of fishing with topwaters. At other times of the year, it is problematic to purposefully hunt for a spotted predator and it is possible in separate water bodies, for example, in frogs and swamps. In hot weather, the fish stands either in the thickness or under the very surface. She notices an attractive object from afar and is ready to make protracted jerks after it. Such attacks of a toothy beast are visually noticeable and look very impressive.

Stably productive topwater fishing begins at the end of May when the water warms up and with the beginning of algae growth. Pike fishing in June on a popper is most effective:

The rivers have returned to their banks.
Algae appeared in sufficient quantities.
Still not so hot, pike remain active all day long.

In July, the biting of the toothy subsides somewhat, especially in stable, hot, dry weather. Bursts of activity occur at dawn. Then by August the effectiveness of fishing increases. Successful use of topwaters is possible until mid-autumn. During this period, a large pike can attack the popper.

Popper for pike in the fall is used in shallow areas. Now, however, other artificial lures are coming to the fore. The effectiveness of fishing on topwater is reduced. The best time to fish for them will be clear windless warm days.

The main places for catching pike on a popper

How to catch pike on a popper? Where is the best place to do this? The best areas for fishing on the topwaters of the toothy beast will be shallow areas with the presence of aquatic vegetation, moderate current or without it. Similar places can be found on any body of water:

Staritsy, bays and backwaters.
Coastal areas.
Local points with shelters for the predator.
Extensive shallow water areas of reservoirs and large rivers.

In addition, surface baits, such as walkers, shallow wobblers, pike poppers, show decent results in various swamps, quarries, ponds, frogs with shallow depths and the presence a large number aquatic vegetation, where the use of other types of baits is problematic.

The wiring of the popper on the pike is possible in deep places. In this case, the predator rises behind a moving object from the bottom or from the water column. This happens when the toothy beast is as active as possible and is ready to make throws in the vertical plane.

Popper - jerky bait. For its wiring, it is necessary to use the appropriate gear, which will allow you to perform the necessary animation techniques, giving the topwater an attractive game that provokes a predator to throw. Even the best pike poppers will not be caught if the angler does not have a well-chosen kit that will allow you to make jerks of different strengths, forcing the bait to work in a given mode.

For fishing on poppers, a set selected for twitching fishing is suitable. It meets all the requirements and meets the criteria necessary for fishing with jerk lures:

Spinning for pike is selected with a fast action, about 2.10 meters tall, with a test of up to 15 grams. It allows you to cast relatively light baits, ensure their correct supply.
The coil is used inertialess, less often multiplier. It should be in harmony with the rod, lay the line evenly on the spool, and not loop when casting.
Braided fishing line provides the necessary rigidity and sensitivity of the tackle. An extensible monofilament thread does not allow you to fully vary the methods of jerky animation and does not cut through the fish well.

Such gear has a significant disadvantage. It does not absorb the jerks of the predator well. Not only does the toothy beast sometimes misses and is badly spotted, but it also breaks off the hook due to the rigidity of the kit. This explains why the pike descends on the popper quite often. In this case, the article how to hook a pike will be useful.

Selected gear must have the necessary margin of safety. The rod must dampen the jerks of the fish and allow it to be pulled out in a forceful manner, since fishing is carried out in difficult places among abundant aquatic vegetation. The thickness of the line is chosen based on the potential size of the pike that can grab the popper.

How to catch pike on a popper? What is the best wiring to use for successful fishing? This type of bait works on jerky animation technique, so the angler needs to use various options and a series of jerks and pauses to get the topwater to catch the pike. Read an overview article on how to catch pike on spinning.

The most catchy poppers for pike work on classic wiring, when the angler makes single jerks of medium strength and pauses of one to two seconds. Other topwaters require a personal approach. Some models like slow feed with long stops. Others prefer a fast-paced animation that consists of a series of jerks and a short pause.

You can hunt for a spotted predator both from the shore and from a boat. Using a watercraft, the angler can qualitatively explore the water area by guiding the popper from different angles. Running fishing does not provide such an opportunity. Catching a toothy from a boat is considered in detail.

In some cases, the bait is able to seduce a pike on a uniform wiring. Monotonous winding at a moderate speed works in areas with depths of up to half a meter and abundant vegetation. However, this approach should not be abused. It is better to use the base feed, which, other things being equal, is more efficient and more versatile. In detail, how to carry out a popper on a pike, the video is presented below.

Finally

In this article, we looked at how to choose a popper for pike, how to hold it, what gear to buy for this. This direction of fishing for a spotted predator is extremely exciting and will appeal to every novice angler who decides to devote himself to spinning. Basic techniques are easy to master on the very first fishing trip, and in more detail about how to catch pike on a popper, the video is presented below.

Catching fish on a popper float (popla popper)

The emerging trend of symbiosis in fishing various baits led to the birth of the so-called pop-popper. The classic spinning lure - popper - has been transformed into a special float for highly effective fishing in surface waters.

The popla popper is a classic example of what is modern fishing developed not only by the developers of famous brands and athletes, but also by amateurs. It is to the latter that we owe the appearance of an extraordinary bite signaling device with the functions of a surface wobbler.

I was introduced to the popla popper by a good friend who experimentally mastered fishing with this element of equipment on his own. Like the web ingenious, the design of the pop-popper is quite simple. In fact, this is an ordinary popper about 3.5 cm long, weighing 3-3.5 g, from which both tees have been removed. The meaning of such a “toothless” bait is that it turns into a bite signaling device and at the same time allows you to make wires with a classic popper effect. Cutting and splashing the water, the popper emits its inherent “gurgling”, attracting the attention of the fish. Well, the latter are caught on a classic leash with a hook, which increases the permeability of the bait attached to it in difficult water areas and reduces the number of hooks. The possibility of successfully using fly fishing flies instead of a hook is not ruled out.

The main profile fish for the pop-popper is the rudd. With its help, it is this inhabitant of the high water that can be successfully pulled out of overgrown and snarled water areas, where the use of other rigs is problematic or even impossible. At the same time, other fish that are sensitive to sound are successfully caught with a popla popper: perches, bleaks, chubs, etc., for which the norm is eating insects floating on the water and falling into the water. Even carp, crucian carp and pike are among the permanent trophies of such fishing. Let often medium-sized, but quite decent.

Fishing with this rig is tempting with its simplicity. Web, what is required is a equipped rod and a wading suit. Even lovers of boat fishing can refuse watercraft. However, we will talk about the intricacies of fishing later, but for now let's dwell on the popla popper itself.

Popla popper line

Warm summer days are not only a great time to relax on the beach - they are also best time for perch fishing on surface lures. This method is very popular primarily because of its impressive spectacle - perch jumping for the bait provides a thrill that will chill the blood in your veins.

For active feeding of fish in surface layers water is influenced by many factors. The most influential is the sun, which dictates certain conditions over the water. Any changes in the exposure of the surface of the water to sunlight, like a domino effect, entails subsequent changes in the habitats of fish.

The generally accepted principle is that the more heat, the better. Despite the relatively unpredictable weather fluctuations, the summer in our country provides us with excellent conditions for perch fishing. The period when perch are most likely to feed on the surface is July, August and September. However, each body of water has its own rules, and you can get satisfactory results in May and October.

The secret weapon is our arsenal

From the offer of hundreds, maybe thousands of surface wobblers, it is worth choosing several positions of different shapes, sizes and work. The task of the bait (popper) is, first of all, to create more noise on the surface of the water. An interesting solution are baits equipped with additional "rattles" to create acoustic vibrations under water and propellers in the tail section.

It is worth paying attention to such poppers as:

Savage Gear 3D Pop Pray is one of the most promising offerings on this list. The length is 6.6 cm. The wobbler is equipped with a built-in long-range casting system, thanks to which the wobbler received much better flight properties. A specially formed neck allows you to emit noise of varying intensity - depending on the wiring technique.

The Salmo Spittin Rover is a twin design of the regular Rover, however this model is also equipped with a special propeller that causes extra noise.

Rapala Skitter Pop is a bait already recognizable all over the world. She conquered the market fishing tackle in every country. Effective primarily on perch.

Rapala Ultra Light Pop is Rapala's smallest popper. This is a great alternative to the days when the fish do not respond to larger lures.

DAM Finesse Baby is the second small lure worthy of attention. The popper is equipped with additional gill openings that create air bubbles in the water!

Right place, right time...

To effectively catch perch on surface baits, you should know the reservoir well. You also need to think outside the box. Perch during the summer can eat during the day - from early morning, in a hot afternoon and until late evening. The conclusion is obvious - it is worth catching at any time! The main thing is to find perch boilers.

The location of the fish shouldn't be a big problem either, because in the summer we often encounter smooth water surfaces that "can be easily read". Actively feeding perches make themselves felt, and it is difficult to miss the hungry humpback perches that prey on fry, and like a dolphin, jump several times over the water, creating panic among the fry.

RELATED: Bait for perch fishing

Perch hunting is also accompanied by a characteristic "splashing" sound that occurs when trying to swallow the prey from the surface of the water.

Places where it is worth abandoning the popper are overgrown areas of the reservoir with algae, places where small things are grouped, and the neighborhood of obstacles: trees, old bridges or underwater vegetation.

Fallen trees are a great place to fish for perch throughout the season. You can catch it with different ways, including on poppers. Leading the bait between the branches can be risky, but these are the places where we have the best chance of catching large perches.

Sense of rhythm

The wiring of surface lures, contrary to popular belief, is quite simple. However, it should be remembered that each bait has its own design and requires an individual approach. There are baits for typical splashing - with a flat muzzle, which creates a hydroacoustic wave and air bubbles on the water.

There are pencil-shaped poppers with a round muzzle, which move on the surface according to the “walk the dog” principle, i.e. in the free translation “dog walk” - with the correct synchronization of pulling up the rod tip and winding the line, the bait will alternately go left and right . While fishing, it is worth taking a second pause. Often, it is at these moments that the interested fish decide to attack.

Special rod

The technique of topwater hauling focuses mainly on their aggressive and fast movements, so for surface lure fishing, the rod should be stiffer, but with a fast action so that we immediately react when hooking. The length of the rod must be at least 2.4 meters.

When fishing from a boat, mainly short rods are used with a tip adapted to the weight of the bait - usually up to several tens of grams.

Of course, the selection of a spinning rod is a rather individual matter for everyone, which does not require the obligatory presence of a separate rod for each fishing method. However, a rod with a hard tip provides much more control over the lure.

When to cut?

When fishing with surface lures, each bite of a perch is clearly visible and it is very spectacular. However, you should not react to every splash of fish. It often happens that the fish does not even hit the bait, producing only splashes of water.

Every impatient angler does not hesitate to strike, which turns out to be idle. In addition, pulling the bait out of the water greatly frightens the fish that are interested in it. So, when should you cut? Then, when you feel the weight of the fish on the rod!

Bites in most cases do not end with one caught fish. Perch are schooling fish and almost always stay in the general group. And there is no doubt that during the next casts you will definitely catch more than one of his brothers.

‘); jQuery("form#socail_details input").val(scurrent); jQuery("form#socail_details input").val(data); updateSocialDetails(current); ); jQuery('a#js-ucf-start').bind('click', function(event) ( event.preventDefault(); if (scurrent == 0) ( window.open("//sys000.ucoz.net /cgi/uutils.fcg?a=soc_comment_auth",'SocialLoginWnd','width=500,height=350,resizable=yes,titlebar=yes'); ) )); jQuery('.uauth-small-links a.login-with').bind('click', function(event) ( event.preventDefault(); var classList = jQuery(this).attr('class').split (' '); var social = providers; if (typeof(social) != 'undefined' && social.enabled == 1)( if(social.handler) ( social.handler(social); ) else (; // unetLoginWnd var newWin = window.open(social.url,"_blank",'width=640,height=500,scrollbars=yes,status=yes'); ) ) )); )); ))(jQuery);

What to catch pike in autumn

With the onset of autumn, the fish finally comes to their senses after a long exhausting summer heat and heat, and begins to gradually accumulate fat in anticipation of the onset of cold weather. In connection with a sharp increase in appetite, the term fattening fish appeared.

And pike is no exception to this rule. As the mercury column of the thermometer gradually drops, the longest period of autumn zhor begins in the toothed predator, which is well caught both on baubles, and on silicone and various wobblers.

Pike fishing in autumn

With a decrease in air temperature to a mark of +20 - +23 degrees, catching a toothed predator begins. As for the time frame, in our area this is the period from late August to early September.

Schematically, experienced fishermen divide autumn into 2 parts, namely:

before the death of the algae
after the death of the algae.

It should be noted that the pike quickly changes its tastes and preferences in food over this relatively short period of time. Based on this, spinningists get an excellent opportunity to experience in action different types lures and fishing techniques.

Using wobblers for pike in autumn

What models of wobblers are best to use? Until the aquatic vegetation has grown to a size that greatly interferes with the normal wiring of the bait, it is advisable to have in your arsenal 2-3 twitching wobblers of the “minow” class 10-15 cm long, which are distinguished by a slight depth.

First of all, such conditions are a consequence of the existing need to catch "windows" - small areas of water, more or less free from algae.

After the process of subsidence begins, experienced fishermen are advised to scan the shallow bays, which were inaccessible throughout the summer due to a continuous green carpet of vegetation.

Further, you should definitely have in your presence several rolls with a depth that will be somewhat less than the depth of the reservoir - we are talking about fats, sheds, etc.

They are ideal for active use in deeper water areas. You should not shrink with sizes - it is best to take baits from 8 cm and above.

The most optimal average size for a pike is 12 cm. It should be noted that rolls may not be needed at all for effective fishing. This is a voluntary decision, which directly depends on your preferences and the amount of money available. The fact is that the wiring near the bottom of the reservoir is invariably associated with permanent hooks, most of which end in dead hooks with the separation of the bait used.

Poppers for pike

Surface-type baits, which are better known as poppers, are not a good option for the fall season. However, in the first weeks of September, sometimes it is possible to get a pike with their help.

Lures for pike

Many fishermen, based on their experience, believe that a spinner is an indispensable part of the box of any self-respecting lover to sit with a spinning rod. Maps is a kind of fishing classic.

Often used instances of "aglia long" No. 2 and No. 3. Until the beginning of October, they can be used. For fishing late autumn it is best to use heavy pike oscillators of large sizes.

Spinners of this type are distinguished by a “heavy” move, in which weighty prey is skillfully imitated, creating powerful acoustic waves. Just what you need for catching pike in the fall.

How to catch pike in autumn (video)

Silicone lures for pike fishing

This class of baits must be available, both for experienced and beginner spinningists. And this has nothing to do with their ability to provide a solid catch.

Silicone fish are always used in reservoirs where the depth does not allow timely tracking of the presence of roots, underwater snags and other debris. They are also very effective in turbid water conditions. And in the event of their breakage, the loss will not hit your pocket hard, which cannot be said about most good spinners and wobblers.

In the case of standard mounting on a jig head with a regular hook, quite often the fish can break loose. In the case of fishing in the autumn, when using fish of 15 cm, a blank blow with a tail off the soft bait, or even a complete loss of prey, often happens.

To avoid such a situation, it is strongly recommended to use a different method of fastening, namely with a tee. With the right approach to silicone bait the number of bites practically does not differ from the use of other, more expensive counterparts. It all depends on your skill and skill level.

We catch pike in autumn on spinning from a boat

Where to catch pike in autumn

By October, all pikes, both adults and young individuals, begin a long-term zhor before winter. During this period, pike bite best in the morning and evening. As the water temperature decreases, the pike zhor intensifies, which reaches its peak by freezing.

This is especially noticeable in small rivers and ponds, at temperatures close to zero degrees, when severe frosts occur at night. That is, the probability of running into a real pre-winter zhor during this period is maximum.

A further decrease in water temperature causes the pike to sink to the bottom of the reservoir or to a depth of 3-8 meters. At the same time, the pike tries to stay at the very bottom, usually near snags or eyebrows, which it uses as a shelter.

At this time, the pike is well caught on any bait and you can catch it by any means. During the zhora, the pike is perfectly caught on the vibrotail, and on the twister and on the lure. It is also worth noting that neither the rate of wiring nor the depth special attention does not require. However, you should follow the rules for each reservoir.

There are two other factors that affect pike fishing in autumn - these are atmospheric pressure and lunar phases. Atmospheric pressure will affect pike bite regardless of the depth of the reservoir, the bite improves markedly as the height of the mercury decreases.

Equipment for pike fishing

First of all, let's start with a choice suitable model spinning for fishing. For September, the most suitable option would be a blank of the middle class of medium-fast action, which differs in the following parameters: length - 210-240 cm, test range - 5-25 g.

As long as the river is "fettered" by multiple vegetation, pike hunting is mostly limited to tweezing in the coastal zone, since long-distance casts are needed. During October-November, the situation changes radically, and most effective way for catching a toothed predator is a fast action spinning rod for long casts up to 270 cm long.

If there is not enough money to purchase several spinning rods, it will be enough to take a spinning “stick” 240 cm long and with a test of 10-40. As life practice shows, all the numbers and company names on the forms in most cases do not affect the effectiveness of fishing.

The main condition for successful fishing is not tackle, but the skill and experience of the fisherman. Only if these two conditions are met, you can safely purchase a professional spinning model for yourself.

The quality of the reel, selected to match the spinning, must be impeccable. For winding on a spool, a fishing line is taken, the cross section of which starts at a mark of 0.25 mm. As an option, it is also allowed to use a braid in the range of 0.12-0.2 mm.

At the same time, it should be noted that the thickness of the fishing line in no way affects the uniformity of the wiring - only the degree of casting distance. At the same time, twitching needs minimal sections, because otherwise the wobbler will be very bad at probing the water column.

The ideal option is to use titanium leaders, which reliably prevent the occurrence of overlaps of the fishing line behind the tees.

Pike fishing in autumn (video)

Spinning pike fishing in autumn has its own characteristics depending on the month. Pike biting varies and depends on the water temperature. Let us consider in more detail how the activity of pike biting and its preferences in baits change, respectively.

How a pike bites in autumn

With the autumn cooling of the water, algae gradually begin to die off, the water becomes clearer, which accordingly affects the choice of baits for catching pike in the fall. What to catch pike on will also depend on the depth of fishing, and on what kind of forage fish prevails in the reservoir, and on many other factors.

Pike fishing in September

In September, the juveniles of various fish have already grown significantly and, like a predator, actively feed on the eve of winter. Until various food organisms burrow into the mud, small fish feeds mainly on them in shallow areas of water bodies, shallow edges and near algae. The pike will also stay nearby, I will live on guard.

Pike fishing in October

Later, by the beginning of October, when the water temperature drops to 7-10 degrees, forage fish will begin to slide onto deep edges, pits and underwater tables with a depth of 4 to 8 m, and then for catching pike in the fall, you will need to use a different tactic and, accordingly, , other baits for pike.

Pike fishing in November

Further, a pattern can be traced in the behavior of the pike: the colder the water, the more passive the pike becomes. Therefore, from the end of October and in November, you again need to switch to a different pike fishing tactic and, consequently, a different range of lures. That's in in general terms a picture of the change in the nature of pike biting in the autumn.

Translated from English wobbler - the one who limps, staggers. When used, the wobbler imitates a wounded or sick fish with its game, which attracts a predator

Catching pike on a wobbler in autumn

Catching pike on a wobbler should be carried out in places where the food base of the predator is collected. In autumn, small fish hunted by pike accumulate in flocks on various underwater spits or edges. A shoal of fish can stand near the surf shore, where various food is nailed by the wind. Oh, and don't forget about wiring. clean water along the border of the algae.

In September - early October, the pike shows maximum activity. At this time, pike fishing is productive and exciting, especially if it is pike fishing on a wobbler. In still sufficiently warm water, the rate of food digestion in a predator is fast. A hungry pike is not so cautious and responds well to wobblers with a sweeping game. But this is provided that the weather is stable. With sudden cold snaps and pressure changes, the pike can be capricious, then you need to use various, sometimes very delicate options for wiring the bait to the pike.

In general, in September various conditions A variety of wobblers for pike work well. Often, knowing that pike fishing is ahead, I make a choice in the direction of minnow class wobblers. It is good to find areas with scattered snags or run a wobbler near algae. When catching pike on a wobbler, different wiring options are selected. It can be uniform, with frequent jerks or jerky with long pauses.

When choosing the color of the bait for pike, you must follow the following rules for choosing a wobbler for fishing:

if the predator has a poor appetite, then the coloring should be as close as possible to the coloring of forage fish, which the predator mainly feeds on: perch, roach, crucian carp, minnow, etc.;
when the pike is as active as possible, it is better to take brightly colored baits that will be visible to a predator from a long distance - red and white is often catchy from aggressive colors.

The range for choosing the length of wobblers for pike for September is wide - from 3.5 to 18 cm, it all depends on the circumstances. They can be single or double. There are convenient wobblers with interchangeable petals, which allows you to adjust the depth of the wiring. If the pike is reluctant to bite, you can opt for baits that emit sound effects. Of course, when fishing for remote points, you need to be guided by the mass of the bait so that it lies exactly in the right place.

When choosing a wobbler for pike fishing, you need to be guided by its characteristics. Wobblers are divided into:

floating;
- sinking;
- with neutral buoyancy (suspenders).

Floating pike lure moves in the upper layers of the water, and when it stops, it floats. Floating wobblers are divided into two groups: surface floating and diving. The length of surface floating models is usually up to 10-12 cm, and the depth of their wiring is up to 2 m. With uniform wiring, the trajectory of the wobbler is close to a straight line, with jerky it is similar to a sinusoid. Diving models of wobblers work at depths up to 6 m and deeper. They respond better to jerky (or reeling with pauses) wiring and have a wider sinusoid of movements.
Sinking wobblers for pike fishing used for wiring in different layers of water, including at the bottom. Their blade is either completely absent or very small, since the mass of the wobbler itself is enough for deepening. Jerk (stepped) wiring is effective, since the pace of the lure changes.
Neutral wobbler (suspender) for catching pike in autumn. After mid-October, wobblers with neutral buoyancy come to the fore among lures, which allow you to make long pauses in the water column. Sinking and floating wobblers do not have such an opportunity. A neutral lure after casting practically does not change its location in the water, due to which it has a large working area. With jerky wiring, the trajectory of its movement is a short jump-detention, which greatly stimulates the predator's appetite.

When catching pike in autumn at night or in muddy water and at depths with poor lighting, you need to try baits of bright colors more often: red, yellow, orange. And another note. Fishermen to some extent traced the pattern and found that warm shades work better in warm water, and cold shades work better in cold water.

The head of the bait has a bevel, semi-ellipse or cutout. The popper is usually equipped with two tees and tails of various shapes, sizes and colors.

Pike fishing in autumn on overgrown areas of the reservoir

At the same time, near algae and in the windows between them in September, pike can take well on poppers, swimbaits, walkers. If the predator has a poor appetite, then the color of the pike bait should be as close as possible to the color of the forage fish that the predator mainly feeds on: perch, roach, crucian carp, gudgeon.

Briefly consider each of the baits for pike.

Catching pike on a popper in autumn

By and large, a popper is a surface-going wobbler that imitates a fish or a frog, which, with splashes and splashes, go on top of a predator. When catching pike in the fall on a popper, you need to remember that this bait is selective: sometimes the pike reacts to it immediately, sometimes it doesn’t seem to notice. Poppers, when jerking wiring, making a gurgling sound, irritate the predator, provoking him to throw. However, using large poppers in shallow water, you can not even see bites. An adult pike is especially suspicious of the gurgling of large poppers. If you are catching pike on a large popper, then play with it more delicately than with a small one, make long pauses more often, twitches should not be too sharp. A small popper can be played sharper and more often. When choosing a rod for pike fishing in the fall, remember that it is better to make jerky wiring with a short hard spinning rod. For such fishing, a “stick” of 2.2-2.5 m with a test characteristic of not more than 17 g is suitable.

Walker fishing for pike in autumn

An alternative to a popper in catching pike in the fall can be a walker (translated into Russian means walking, wandering). At its core, this is a surface wobbler that does not have a blade, and due to the streamlined head part, it has low drag. But with a neat jerky wiring, he begins to deviate to the side, making a zigzag movement and nodding his head. At the same time, he leaves a kind of mustache on the surface of the water. The Americans jokingly called this lure “walking the dog.” For autumn pike fishing, walkers 5 to 12 cm long are used.

Fishing for pike on a swimbait in autumn

Another type of bait for surface pike fishing in autumn is swimbaits. Bladeless swimbaits catch less grass when hauling through windows. They can be floating, sinking, neutral, and by design - one-piece, two- and three-piece. During the autumn testing of sinking swimbaits in one of the quarries, casting was carried out into the windows of algae, and when the rod tip was raised high, the bait came to the surface of the water. Jerk wiring gave attractiveness to the movements of the swimbait. Pike immediately reacted to this style of play.

Even with a very poor pike bite in autumn, a careful choice of bait, its delicate play with stops and shakes on the spot usually always gives a positive result.

The main sign of a swimbait is its components, the presence of a blade is not necessary

Wiring for pike in autumn

As in summer, pike in warm windy weather during the day often manifests itself as an active bite. Then, when moving through a reservoir on a boat, you need to anchor on the windward side and throw it into the wind so that the bait flies more accurately.

In reservoirs, sometimes there are bays and shallow waterings with stumps, snags, and underwater mounds. Sometimes the pike lives on watering free from vegetation, but always chooses a place near some algae bush or snag. Important to choose correct level wiring bait, because sometimes autumn pike does not react at all to the bait that goes at a considerable distance from the ground, but to the one that moves close to it, and even with attractive stops and twitches, it immediately rushes.

In September, with stable warm weather, more attention should be paid to catching irrigation with a depth of 1.5 to 4 m. When hillocks are found in such areas, it is necessary to cast bait so that the wiring crosses its surface in different directions. Wobblers with a depth of 2-4 m are well suited here, so that they pass over the very top of the hillock.

In case of long-range fishing by spinning of the near-bottom sections of the reservoir, various jig baits can be out of competition. Depending on the activity of the predator in one or another autumn season, you can make the jig bait high-frequency or low-frequency - by cutting the vibrotail or twister blade in a certain way. An active pike is successfully caught on an intensively playing vibrotail or twister, and for a passive pike, give a quiet bait. The wiring remains stepped, but not sharp. In the early stages of the search for pike, you need to alternate fast wiring with slow.